Benches Mac desktops

15

Startup Manager doesn't appear

apple Verified

Imported from the Apple Support Forums via the Wayback Machine 🔗

After installing BootCamp on my brand new iMac, the Startup/Boot Manager does not show up.

So I can't boot into Boot Camp or Mac OS X at my will. I need to use the Startup Disk pref pane.

I was holding down the Option key at every moment in startup sequence to no avail. I've tried three different keyboards, wireless and wired.

The Option key seems to be working, because then I get just a blank grey screen. When I move the mouse, the mouse cursor appears but does not move. I have to restart the Mac.

When I booted in Boot Camp using the Startup Disk preference pane, I need to reset the PRAM to make boot Mac OS X default.

Today I saw that this very problem was fixed for MacBooks with a firmware update, so I assume and hope that there will be a firmware update for the iMac, too.

One remark: I have 3 partitions. 2 were built using Boot Camp. The HFS partition was then split into 2 uasinf the Disk Utility. Maybe that caused the problem?

15 replies

Sign in or join Beachball Help to reply.

  1. 0

    Kenichi Watanabe

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    You reset PRAM, but you may also want to reset SMC

    http://support.apple.com/kb/HT3964

    which is basically unplugging the imac and reconnecting using a precise procedure.

    Also, you may want to check if other startup key options work, such as the C key to boot from your Mac OS X installation disc in the optical drive.

  2. 0

    Robert Fischer

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Thank you for your hints, I tried them all, however...

    - SMC Reset did not change anything

    - Keyboard is definitely working, C as well as D for hardware test are working

  3. 0

    Kenichi Watanabe

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    The only other thing I can think of suggesting is to start up from the Mac OS X installation disc (for the currently installed system release); at the first Installer screen, go up to the menu bar and run Disk Utility from the
    Utilities menu.

    In the sidebar, select the drive. Be sure to select the drive and not one of the volumes below the drive. On the +First Aid+ tab, use +Repair Disk+ (for can use +Verify Disk+ first if you want to). Note if any errors are reported, and there are errors, note if they are repaired by Disk Utility. In Snow Leopard, there is a message that usually says, "Updating boot support partitions for the volume as required." That may have something to do with this issue, so pay particular attention to what that message says at the end of each volume's repair.

    Note: When you are doing troubleshooting like this, you should have a good backup already. It is always possible that the problem (whatever it is) may get worse, and cause loss of data.

  4. 0

    Robert Fischer

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Thanks, again!

    I did as you suggested, however, neither the Repair Disk nor the Verify Disk button became active. Only if I selected a volume. Maybe that's an hint that the drive itself is not "repairable"?

  5. 0

    Kenichi Watanabe

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    That may because you have a Windows partition created by Boot Camp. I forgot you mentioned that earlier. In that case, select the Mac OS X volume (not the entire drive) in the sidebar and use +Repair Disk+ on that volume only. Again, note what is says at the end about the +boot partition+, because that may be related to this problem.

    I don't use Boot Camp, so I don't know how it affects the ability for Disk Utility to take the
    repair action on the entire drive. If Boot Camp is the reason, there is nothing wrong in that regard. But it is still possible that Boot Camp is somehow related to the problem you are having.

  6. 0

    Robert Fischer

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Disk Utility found no problems on both HFS partitions. The Boot Camp partition could not be checked, but I assume this is OK for an NTFS filesystem.

    Well, for now I'll live with this little annoyance and sometimes a PRAM reset, but hopefully a firmware update will fix that, someday.

  7. 0

    Kenichi Watanabe

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    So I guess the Option key startup to get Startup Manager still does not work?

  8. 0

    Robert Fischer

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    No, it does not work. I'm going with Startup Disk preferences in Mac OS X and the corresponding Boot Camp tool in Windows 7 to switch boot partition.

    Thank you for all your suggestions.

  9. 0

    Kenichi Watanabe

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Startup Manager is in ROM. So either the ROM is somehow corrupted, or it is working properly, but it is finding some unexpected condition on the internal drive, so it crashes while trying to display the list of startup options. Therefore, the Option key at startup is being acknowledged, but the Startup Manager screen is never appearing.

    The only other suggestion I have is to back up your data and completely re-partition and reformat the internal drive using Disk Utility off the Mac OS X installation disc. Do it as one standard partiton and install the standard Snow Leopard system on it. Test to see if Startup Manager now works. If it still does not work, you should have your iMac checked by an Apple-certified technician under warranty. It it does work, then you have resolved the problem and you can redo the setup you had before, test to make sure Startup Manager still works, and then restore your data.

  10. 0

    Robert Fischer

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Fresh install is no option for me. It would take me 8 hours at least to move around 500 GBs to/from backup. That's a too high price for a slight chance that it might work afterwards.

  11. 0

    Kenichi Watanabe

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Well, at some point before the warranty expires, you should get it checked, in case it is a hardware issue. At that point, the technician will probably end up doing a re-partition, reformat, and re-install as part of the troubleshooting. So even if you don't do it now, you should plan for it at some point. And you should always have the expectation that the hard drive can fail at any time without warning, which would require a restore from backup.

  12. 0

    Robert Fischer

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I'll keep your hints in mind. Someday within the next 3 years of Apple Care, I will probably reformat my drive. Until then, I keep my fingers crossed - and my backups valid.

  13. 0

    pupk

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Sorry, I'm joining this thread late, but I have a new i7 and am seeing the same problem with Startup Manager not responding.

    My problem appears to be related to the fact that I have the wireless keyboard that came with this iMac. When I plug in the old wired keyboard, there is no problem bringing up S.M.

    I did however find a workaround. Upon booting, press the power button on the wireless keyboard and release it about every 1/2 second or so. Don't press it long enough to power it off, but press it frequently enough to keep the green light steadily on. At the same time, hold down the Option key.

    It's hokey, I know, but it works for me. Note that it doesn't work 100% of the time, but more than half the time at least.

  14. 0

    Kenichi Watanabe

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    If you have not already, you should try re-pairing the keyboard at System Preferences Keyboard pane +Set Up Bluetooth Keyboard+ button.

  15. 0

    pupk

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Thanks for the suggestion, Kenichi. I tried re-pairing but still had the same issue. I then tried resetting SMC, and that seemed to work. However, my happiness was short lived, as it didn't work the next time I tried rebooting, or the next.

    Though, I did realize one thing. I can get Startup Manager to reliably appear while using my wireless keyboard every time after a power cycle! So, soft reboots don't work, but a hard power cycle (off for at least 5 seconds) and I can get into Startup Manager every time.

    So, a minor inconvenience of a workaround, but better than my previously suggested workaround. Hopefully, this would work for the original poster as well.

    Thanks,

    pup