Benches Mac desktops

15

DVD Player says skipping over damaged are…

apple Verified

Imported from the Apple Support Forums via the Wayback Machine 🔗

I made a movie for my parents and when they play it in their iMac they get the following error during playback,"skipping over damaged area." and it just hangs there. It made it to 6 minutes the first time, then made it to 3 minutes then makes it to one minute. It seems like it occurs at different times.I made the movie using iMovie 09 and iDVD. I put the dvd in a cheap dvd player and it played it all the way through the entire movie w/o any problems.

I tried searching the forums and I have not found a similar problem. My iMac is a mid 2008 model and the super drive is a Matshita DVD-R UJ-875.

Thanks

15 replies

Sign in or join Beachball Help to reply.

  1. 0

    Carol Jean

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I have the same problem even with purchased DVDs. Generally it doesn't cause a major problem. However, this morning I had to force quit the computer in order to get the DVD player to stop hanging.

  2. 0

    Triple4

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    My parents have to do that too sometimes. I am going to have them call AppleCare soon.

  3. 0

    klavaris

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Hi

    I have the same problem with my iMac, in which resides a different drive model than yours:

    "*PIONEER DVD-RW DVR-K06A*:

    +Firmware Revision: Q631+

    +Interconnect: ATAPI+

    +Burn Support: Yes (Apple Shipping Drive)+

    +Cache: 2000 KB+

    +Reads DVD: Yes+

    +CD-Write: -R, -RW+

    +DVD-Write: -R, -R DL, -RW, +R, +R DL,
    RW

    +Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO+

    +Media: Insert media and refresh to show available burn speeds+"

    If you search in Google my drive's model you will find much more problems though …

    So, it might be a relief to you what I'm saying, since you (lucky ones!) are just … skipping a "damaged area" of your DVDs and likely, the next moment you continue to watch you movies!

  4. 0

    Timothy Nicholas Jones

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Klavaris, the reality that your Apple computer has the same problem as other apple computers is in no way a relief. The reality is it is an apple problem and essentially supported by the notion you bring up that your drive is different from that identified earlier in the post, and yet the same problem exists on your computer.

    My MBP (early 2008 model) also has the same error message when nothing is wrong with the disk and then skips ahead by about 10 minutes. I'll eject and visually inspect to find myself working for my $2000 computer whereas I'd like to just watch a movie like I could with a cheap knock off DVD player.

    Does anyone know what might be wrong if this error message occurs regularly for no appropriate reason?

    If so, I'd very much like to learn how to fix the issue, thank you.

  5. 0

    SigmundFraud2

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Yes, same.

    Interestingly if you rip the DVD there are no read errors during the rip and the TS folder plays just fine. This is very annoying and something that you're not going to want to do every time you want to watch a DVD and of course there are legal issues depending on the disc. It is unclear to me whether it is poor tolerances within the software player for errors (though my MBP 17 was fine) or something to do with the drive - HL-DT-ST DVDRW GA11N (an LG drive). The fact that rips are fine gives me hope that a firmware or software fix should be possible.

  6. 0

    Fustbariclation

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I've been having exactly this problem with my new (this weekend!) iMac. Quite a number of DVDs, some very new, give 'skipping over damaged area' for a while, it freezes the picture, but then carries on without missing anything.

    Has anybody a solution?

    It seems to me that if there was a way of increasing the streaming buffer then the problem might go away, I can't find anything in DVD Player that allows me to do this. Any suggestions would be most welcome.

  7. 0

    divavamp

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    same issue...would so love some help in this situation!!!

  8. 0

    Triple4

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I think you are right. I am flying by my parents house and I will call AppleCare and see if they are aware of the issue and see if I can find a fix. Will post back with results.

  9. 0

    corbey

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Same issue. Interesting when I play the SAME dvd with VLC media player I do not get the same problem. WHen use Apple DVD it gives error - freezes picture and then starts - usually with no discernible part of the movie skipped - very annoying since it seems to magically know to do this at most exciting part of a film.

  10. 0

    Triple4

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Well I'll post with results.

  11. 0

    Triple4

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I am working w/ the iMac and noticed my parents computer was not up to date. I did an update to 10.5.7 and now it works perfectly, no more skips and other discs that wouldn't run now play w/o any problems.

    Others that have problems, are your systems up to date?

    Hope this helps, maybe there was a fix w/ 10.5.7.

    Jeremy

  12. 0

    Triple4

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Well, I was messing around w/ it again, played the "problem disk" and it repeated the problem, but most of the time it worked w/o any issues. Not sure if the update helped, but I am going to contact Apple.

  13. 0

    Winebrats

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    We have had the same problem ever since we bought our machine 60 days ago... Here's where we are: DVDs, even brand new ones, skip - "skipping over damaged area" on our iMac while our MBP and MB play them flawlessly. There is no loss in the movie, only the pause in play.

    Our software is up to date, we took it into Apple over three trips: 1.) had them clean our dvd drive, 2.) problem persisted so we replaced the dvd drive, 3.) problem persisted so we wiped out our entire hard drive and did a software re-install and update... and problem still persists! We are are packing it up for a fourth time and will take it into Apple to have them replace the machine or all the parts...

    We're bummed, it's our 3rd Apple computer and the 'biggest' and yet it cannot do the simple things? We'll keep you posted as to what happens.

  14. 0

    Triple4

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Thanks, I tried to get it to duplicate at my parents house so I could call Apple, but it wouldn't do it. Let me know if they fix it, it is crap that such a great machine cannot play a simple DVD.

  15. 0

    Winebrats

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    We had the DVD drive replaced again (our 3rd for this machine) and we had the drive cables replaced as well. We tested the DVD player in the store for approximately fifteen minutes and all went well.

    Brought it home, popped in a DVD and it started skipping again and continued to do so on 5 of the 5 movies we tested. What is most frustrating is that the computer skips inconsistently on where it skips? Sometimes just skipping towards the end or through out the entire movie. Bummer... Packing this up for the fifth time and taking it into Apple to have it replaced. I don't feel comfortable keeping a machine that has had this much work and still doesn't function correctly.

    Before we packed it up and brought it back I had an extensive conversation with two of the employees on the Genius bar about a "What if" scenario. They said bring it back and talk to manager about replacement but couldn't guarantee that it would be replaced but after $3k on a 90 day problem I'm hoping for the best. Will keep posted - my suggestion is to have the same discussion on your end the next time you are in there.

    ...and we agree with you, it is crap... good luck.