Please help me... iMac cannot access tc data
apple Verified ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I did a terrible mistake and I just hope I will manage to fix it.
I connected a USB data stick to my imac and wanted to erase it.
Opened disk utility and clicked on erase when I realized it was erasing the TC...
It was just 'preparing to erase' and i panicked and switched off TC...
Now iMac cannot connect to TC :((((( and Im going MAD (it says backup disk cannot be mounted)
Please please any suggestion help me.
14 replies
Sign in or join Beachball Help to reply.
- 0
Apple Support Community member ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Have you tried using Disk Utility and run the "Verify Disk" & "Repair Disk" options on the TC's disk yet?
- 0
Apple Support Community member ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Yes thanks alot for that. So I checked and then repaired TC and it seems ok as the log stated that file verified and ok etc etc
Now I've been trying to back up but on my iMac it keeps on saying "preparing to back up" and stays like that for days (literally). Now I plugged my TC using the cable but it doesn't seem to be making any difference and I don't know how to check whether it is transmitting via cable or wireless..
- 0
Apple Support Community member ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Check out the following Apple Support articles to see if they can help:
o Mac OS X 10.5: Time Machine may display "Preparing" for a longer time
o Time Machine: Troubleshooting backup issues - 0
Apple Support Community member ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
how can I identify whether it is now connected via cable or wireless? i did connect the cable to allow faster "preparing.." but im not sure if TC is using the cable or wireless capabilities.
- 0
Apple Support Community member ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
If the device connected to the TC is connected by both by wire and wirelessly, then the network service order would typically control which path is chosen.
System Preferences > Network > Show All
The Service Order is shown in the column on the left of the pane.
- 0
Apple Support Community member ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
thanks. im a bit worried now however it's been like 2 days and it is still showing preparing for back up. im not even using the imac. the data in it is around 200gb. i dont mind waiting but do you think this is normal?
- 0
Apple Support Community member ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Unfortunately, it is still possible that the initiating the erase is causing the problem you are now seeing. I suggest stopping the backup, and then, try again. If this doesn't work, it may still require you to completely erase/reformat the TC's hard drive in order to use it.
- 0
Apple Support Community member ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
no i think i did fix that as when i try to acess data on time capsule it allows me to see al the files since first backup / the problem now is to continue to back up as it has been two days preparing to backup and nothing happened. do you still think this is normal
- 0
Apple Support Community member ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
the problem now is to continue to back up as it has been two days preparing to backup and nothing happened. do you still think this is normal
No, although it can sometimes take a considerable amount of time, two days does not seem "normal" for just the "preparing to backup" stage.
- 0
Apple Support Community member ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
so i stopped it as it has been going for straight 4 days
now i do not know what to do
plus can anyone re confirm and help me check how i can make sure that the connection used is via cable not wireless
- 0
Apple Support Community member ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Open Network Preferences.
Look at the services list on the left. Which ever service is at the top is the service that is taking precedence.!http://www.me.com/ro/glennac/Galleries/100016/NetworkPrefs/web.png?ver=12445763 250001!
You can adjust the order they appear by clicking on the Action Menu (Gear icon) at the bottom and select "Set Service Order...". In the little window that appears, drag the service you wish to take priority to the top. Then click "OK".
Otherwise, you can ensure that you are communicating via Ethernet only by turning OFF your Airport connection. Go up to the Airport menu and select "Turn Airport OFF".
Let us know if this was helpful. Cheers!
- 0
Apple Support Community member ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
it is but each time i try it again it stays preparing... more than 60 hours or more i left it but for nothing... so I don't know what to do :(((((
- 0
Apple Support Community member ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
The following can explaine exseccive periods of "Preparing Backup...":
*Anti-Virus Software*
Running anti-virus software can interfere with the backup process. Either disable it altogether, or try the suggestion outlined here, “If you use third-party anti-virus scanning software and have issues, make sure your Time Machine back up folder (Backups.backupdb on the Time Machine disk) is excluded from virus scanning.” (http://support.apple.com/kb/TS1516)*Software Updates* #
Installing new software, upgrading existing software, or updating Mac OS X system software can create major changes in the structure of your Macs directories. Time Machine will backup every file that has changed since the installation.After an OS update (like 10.5.5) Time Machine realizes the system no longer matches what it looked like during the previous backup. So it has determined that it's earlier catalogue of what-should-be-where is “untrustable”. So it is going to go item-by-item comparing the before and after of your system.
*Spotlight Keeps Indexing Backup Drive* #
It may be that Time Machine can’t proceed or complete a backup due to Spotlight indexing. During this period, take a look at the Spotlight icon in the upper right corner of your screen. Is there a tiny dot pulsating in the center of the spyglass? Click on the icon. Is there a progress bar displayed? Generally, Spotlight indexing is a good thing. If it has only been a couple of hours then, stop the backup, turn Time Machine OFF, and let the indexing continue.However, at times Spotlight may hang and never progress after many hours, preventing further backups from taking place.
Go to System Preferences --> Time Machine.
Using the slider on the left, turn OFF Time Machine backups for now.
Next, click “Show All” in the toolbar.
Select the Spotlight Preferences.
Click the Privacy Tab.
First, drag your Macs’ internal hard disk from the desktop to the Privacy list.
Wait 10 seconds, then highlight the Macs’ hard disk in the list and click the tiny “-” button at the bottom to remove it from the list.
Spotlight will initiate a reindex of the hard disk. If you click on the Spotlight menu icon you may see the message:+“Spotlight helps you quickly find things on your computer. Spotlight will be available as soon as the contents of your computer have been indexed.”+
...and a progress bar will indicate the time remaining.
Once completed, drag your Time Machine backup disk into the Privacy list of the Spotlight Preferences.
Wait 10 seconds, then highlight the Time Machine backup disk in the list and click the tiny “-” button at the bottom to remove it from the list.
Spotlight will now initiate a reindex of the hard disk.
Once completed, if you have any other hard disks attached to your Mac that are also being backed using Time Machine, then force a reindex as well using the procedure outlined above.
Then turn Time Machine back ON and initiate a backup.*Run Away System Process*
It’s possible that Time Machine is stuck “Preparing…” because another process is monopolizing your Macs’ CPU. Launch Activity Monitor and sort the items by “CPU”. Is there a process that is at or near 100% that might be preventing the backupd process from moving forward?One poster stated, “I took it to my local Genius Bar and they found a Syslogd daemon running, taking up 100% of my CPU….This resulted in the "Preparing..." mode running forever.” [http://discussions.apple.com/thread.jspa?threadID=1755600&tstart=15]
You may be able use Activity Monitor to “kill” the offending process. Or you may be able to resolve it simply by rebooting your Mac. Then try backing up again.
*Verify/Repair Mac Hard Disk & Permissions*
It may be that your Macs’ internal hard disk has so many file/directory issues that Time Machine simply has trouble making sense of it. Some users have had success using Disk Utility on their Macs’ hard drive.Launch Disk Utility and click “Repair Disk Permissions”.
Once complete, attempt a backup.
If Time Machine appears to hang at “Preparing…” again, then do the following:Insert your Macs’ original install DVD and reboot holding down the “C” key.
At the Welcome screen go up to the “Utilities” menu and select Disk Utility.
Select your Macs’ hard disk on the left and click “Verify Disk” on the right.
If problems are found click “Repair Disk”.
Reboot to your normal desktop and try backing up again.*Reboot Time Capsule* (For Time Capsule Users) #
If, though, none of the options above have helped and it has been 12 hours or more of “Preparing…”, then the Time Capsule may need to be restarted.Stop the backup from the Time Machine menu. (Give if a few minutes while it says “Stopping backup…”)
When the Time Machine icon stops spinning, unplug the TC from the wall outlet.
Reboot your Mac.
Plug the TC back in again.
After it has restarted (30-60 seconds), attempt another backup.
Time Machine may report “Preparing…” again, but it shouldn’t be lasting more than a couple of hours.Let us know if any of the above was helpful in resolving your issue.
- 0
Apple Support Community member ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
i'm going insane.
I stopped the "preparing..." process and also stopped the indexing (iMac was indexing on spot light etc).
Then I tried to at least try and recover files I know I deleted but I was getting an error such as "you do not have the permissions bla bla bla" and the files were not being recevered.
Now I tried to verify disk but it fails. Tried to repair... it stays on "REBUILDING CATALOG B-Tree" then it fails.
I'm screwed as I have laods of important files on TC and not on iMac.