Benches Mac desktops

15

Mac Mini - Sony Bravia display issue

apple Verified

Imported from the Apple Support Forums via the Wayback Machine 🔗

I connected the above 32" HDTV to my Mac mini using the DVI - HDMI configuration and has worked perfectly.

However, after reboot during the recent software update (14/05/09) the resolution changed and I have now lost about an inch from the perimeter which is mighty annoying. I have tried various display settings but none of them works correctly.

Can anyone suggest a reason for this?

Just before the update I deleted an old user that I hadn't used in a long time. Could this be relevant?

15 replies

Sign in or join Beachball Help to reply.

  1. 0

    j.larsen

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I have suggestion to you problem, maybe it will help you as it helped me...

    I have a Samsung flatscreen, which use the same panel as a Sony flatscreen.

    When I set the display to 16:9, I'm missing ~1 inch like you, but when I set the display to "Just Scan" it works 🙂

    //Good luck

  2. 0

    Kassinen

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    i have the exact same problem with my mini mac+ sony bravia. after the update few days ago something changed and to the worse, overscan setting gives a picture that is too big and without it the picture is too small and even the quality of the picture seems worse.

    i hope this gets fixed back soon enough!

  3. 0

    aczyzyk

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I have the same issue with Philips HD Ready TV after last software update.

  4. 0

    robcharrison

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Exactly the same problem here, but no changes made (ie i did not delete any users etc.).

    I performed the upgrade to 10.5.7 on Monday 11th May and since then the screen resolution has not been the same. i have tried all options with overscan, no overscan etc. and the quality is dire on the only usable option which (for me) is 1280x720 with no overscan (and 50Hz too).

    The picture quality (does this mean the driver? presume so?) is awful. I also noticed that my Sony 32" TV now displays 1080p when the Mac Mini first boots and previously (with the earlier driver) it displayed 720p - so maybe the driver upgrade had added the 1080p option/capability, however my TV can't display 1080p as it is native 720 but it does downscale extremely well (normally) - and it does a good job of that with other attached devices so I know it's the Mac Mini at fault.

    I've logged the problem with Apple but haven't connected with anyone who has a clue yet...

    If I hear more I'll report it here.

    Would love to go back to the old driver, this quality of the display output is now awful, truly awful. Wonder if there is a way to do that...

    Rob.

  5. 0

    Dennisson

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I'm glad (in a way) that I'm not the only one with this trouble. It does sound as if the update causes the problem and not the deletion of the user.

    I do notice that when I access HDMI3 on the TV it has 720p/60 and I'm sure it used to say something else in the top corner but can't remember what. SwitchResX doesn't want to find the correct resolution either and I agree that the quality is poor compared to what it was last week.

    Thanks for the replies and hopefully some light will be shed on the issue very soon.

  6. 0

    russkey777

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Extremely disappointed with Apple. In true Microsoft style, they screwed a lot of users. Is there a way of downgrading to OS X 10.5.6 ?

  7. 0

    wpalmerj

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I too had to revert to 1.5.6 to get my display working properly. If you have your install disc and time machine running, this will be a cinch:

    http://www.macfixit.com/article.php?story=20090514132546680

  8. 0

    Morten Kaada

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I have the same issue with my mini and Sony Bravia. Overscan makes the picture too big and turning it off makes it too small, Besides that, the colors look crap now. It seems like a lot of nuances in the colors are missing. Tried to recalibrate that didn't produce any results,,, Hoping for a fix on this one,,,

  9. 0

    russkey777

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I bought a new 15 pin - 15 pin cable and connected miniMac to PC input of SONY Bravia. Finally, it works. Resolution is great ( I am using 1360 x 768)

  10. 0

    makip

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Hi Dennisson,

    I am experiencing the same issue immediately after the update from 10.5.6 -> 10.5.7.

    I have a Mini connected to a 32" Samsung LCD tv via DVI-HDMI cable, and the Mac can no longer recognise the tv's native resolution of 1360x768. When I click "Detect Displays" from the System Preferences > Displays panel nothing happens. When I did this in the past it would recognise my tv model and it's native resolution.

    As a work-around until the issue get's fixed, I have done as user "j.larsen" suggested (thanks!) and changed my tv's display config to "Just Scan" instead of the "16:9" setting it was previously at.

    This isnt ideal however, as while I can see the entire picture, I am only seeing 1280x720 not the tv's native 1360x768 res.

    I haven't bothered using Time Machine on my Mini since it just acts as a Media centre and my movies are on a network volume.. however I now wish I had bought an extra disk for this purpose as I could simply revert back to 10.5.6 and enjoy my movies in native res.

    Hope this helps - I will still be on the lookout for a fix to what 10.5.7 has broken.

  11. 0

    robcharrison

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    i am using the DVI to connect to HDMI on the TV, have done this since day one and don't plan to change that to VGA - plus the way things are cabled makes it very difficult as the screen is wall mounted as a feature in the kitchen and the mac mini is hidden too, most of the cables are behind an enclosure so not easy to move.

    this looks straightforward for apple to fix as it is purely a video driver issue - ie upping to 1080p means they have messed with the driver and not retro tested sufficiently, a pain but these things happen. if they don't fix it soon i'll be re-installing from scratch (no time machine here sadly...) as it has ruined my working experience with the resolution now so rank.

  12. 0

    Dennisson

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Thanks for the responses.

    I've forked out £20 for a 15-pin cable and finally have it back to near as **** it what it was before.

    Cheers

  13. 0

    robcharrison

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    this question is now answered - there is a problem with apples latest driver - and i don't see a fix to this yet so how can this be answered!!!!!!!!!!!!!

  14. 0

    makip

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I agree - The bug has to actually be fixed!

    Can user's provide feedback saying that it's NOT answered?

    If it is solved in another thread, or admins would like to consolidate related threads, please state this and provide a reference link.. thank you.

  15. 0

    makip

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I just noticed the post marked as "Solved" stated his solution was to use a VGA connector since the DVI/HDMI was broken. Obviously this a massive compromise which does not even help high-res users.