Imported from the Apple Support Forums via the Wayback Machine 🔗
hi,
I have read many of the posts here relating to Imac g5 not starting up. I have the same problem. I have a g5 ALS. I did the LED test. The first LED comes on but the second LED would not flicker or come on. So, I concluded (from the apple support info on the net), that my logic board was gone. I replaced the logic board an hour ago and: NOTHING! The same thing! LED 1 on, that is it. Did I miss something? Should I have had replaced the power supply in stead? Please help! Lost in Paris....
Imported from the Apple Support Forums via the Wayback Machine 🔗
Ovid, have you reset the SMU? Do you get any response at all from the computer when you turn it on - do you hear the hard drive spinning or the fans going? If it's really dead, then probably your next step would be to replace the power supply unit too.
Let us know what happens,
0
dr o·
Imported from the Apple Support Forums via the Wayback Machine 🔗
hi Miriam,
thank you for your suggestion. I read that the SMU is automaticly reset when the power is cut off from an iMac G5 20" ALS. Is that correct? To answer your first question: No, I do not hear any sound from the machine(i.e. fans,Etc,....)My question still remains: Why does the first LED go on, but no sign from the 2nd LED, even though I replaced the logic board? Is there any other test which would indicate that I have a 'bad' power supply? If that is indeed the problem.
ovid
0
MGW·
Imported from the Apple Support Forums via the Wayback Machine 🔗
You are not getting the second LED because the power supply is not working properly. The method for resetting the SMU is not simply to pull the plug and then restart, look at the instructions from Apple:
1. Turn off the computer by choosing Shut Down from the Apple menu, or by holding the power button until the computer turns off.
2. Unplug all cables from the computer, including the power cord.
3. Wait 10 seconds.
4. *Plug in the power cord while simultaneously pressing and holding the power button on the back of the computer.*
5. *Let go of the power button.*
6. *Press the power button once more to start up your iMac.*
It seems pretty clear hat the power supply is faulty, it's time to replace it.
0
Lt.·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Hi,
I'm new to this forum so please be gentle...
My iMac G5 2nd edition (with Ambient Light Sensor) froze today and the fan went berserk. Only option we had was to shut the thing up by pressing the power button. Now the mac won't boot anymore. When I try to boot it sometimes the light on the front lights up and sometimes it doesn't. Sometimes the chime sounds and sometimes it doesn't. The screen stays black. I cannot boot from cd player either. I tried the procedure as written in http://support.apple.com/kb/HT2173?viewlocale=en_US
The first and second of four LEDS on the back are on permanently (which is good according to the article), but the third is not, which should indicate that the computer and the LCD display aren't communicating and no video signal is being generated.
I want to be absolutely sure that the logic board needs to be replaced and that I tried everything there is before I run to the store to buy me a new iMac.
Any suggestions? Thanx!
0
MGW·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Welcome to Discussions - gently - you should really post your own question, rather than tagging onto someone else's but, yes, it is more than likely your logic board needs replacing. If it were your drive, you would get as far as a screen with a flashing question mark, if it were your screen, you would be able to boot, but get a black screen. The fact that you can't boot at all points to the logic board.
0
Lt.·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Hi,
Thank you! I'll keep that in mind next time I post a question.
Yesterday I tried booting the mac several times and one time I got the gray screen with the apple logo and the computer froze. With all of my next attempts the computer just sat there en did nothing (no chimes, only the fan goes crazy).
A friend of mine thinks it is a broken logicboard too, but says it can also be the "inverter" (the gray part on the left side, under the cd player). Is he right and is it worth trying to replace that part first?
Thanks again.
0
MGW·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I don't know whether he's right, I suggest you take it in and have it looked at by a tech. Let us know what the diagnosis was please,