Imported from the Apple Support Forums via the Wayback Machine 🔗
I replace my analog board to repair a no start up problem. This worked out OK except for a flicker in the screen from a normal look to a light blue haze if I tap the side of the iMac the screen will go back to a normal look for a short time then back to the light blue look. I opened it back up and checked for any loose connections all looked OK resetting the pram did not solve the problem does anyone have any suggestions that might help me out? Thanks for any help you can provide.
Imported from the Apple Support Forums via the Wayback Machine 🔗
David, just to CAREFULLY check the connections tp make sure that nothing has been dislodged. Is this board new or second-hand? Do you know that it is alright?
best wishes
Andrew Platt
0
anirtaK·
Imported from the Apple Support Forums via the Wayback Machine 🔗
All PAV boards currently in circulation are used and refurbished. These boards are no longer being produced. The problem David is describing is likely with the CRT itself. The part of the PAV board that plugs onto the neck of the CRT may be a bit loose or wobbley. It would be best if the computer was taken to the technician again. This should be resolved free of charge if it does not require another part.