swing/monitor arm loose
apple Verified ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
My swing arm has become loose and now the monitor twists left and right and settles where it is not level. Any way, is there any way to fix this my self or do I have to take it to apple. If I have to take it to Apple, do you have any idea how much it is going to cost to fix it since it isn't under warranty?
15 replies
Sign in or join Beachball Help to reply.
- 0
plastique45 ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Physical issues with computers cannot be solved through internet-based forums. Take your machine to your nearest Apple POS and see what THEY have to say about their time estimate.
- 0
Sid Starr ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I have a similar problem -- minor drops in moving in the vertical plane. My Apple Centre tell me that it seems to affect 17" iMacs and the only solution is to replace the whole arm and screen. I thought there might be a three-pin tool to tighten it up, but not so.
- 0
Brian Cohn ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I recently added an iSight to the top of my flat panel display and now the tension of the arm is not enought to keep it from floating down.
I also thought that I could find a three pin tool to adjust...are you sure that it isn't possible? How annoying!
- 0
Kraig ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
My 17" monitor is also starting to float down... there has got to be an easier way to tighten it rather than to get the whole arm and screen replaced, thats ridiculous! When I first got this I could put it at absolutely any angle or rotation and it would stay... now I have to hold it in place for a second so that it won't slide all the way down. This very annoying.
- 0
n0k|a ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Well this is also a problem on 20" iMacs too. Had mine only 7 hours and the screen keeps dipping down :0(
- 0
AxL ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
There is a <a href="http://www.drbott.com/prod/db.lasso?code=5135-NECK>tool</a> (look also <a href="http://discussions.info.apple.com/webx?13@@.688ebc19">this thread, among others) but to use it would void your warranty, and I think the neck problem is more a factory build problem.
Picture how a sailing boat mast can stand the same kind of bigger forces on ONE point: The mast, first, has to come out from the deepest possible point in the hull, and second cannot make it without shrouds.
First, the iMac screen "mast" cannot come out through the hard drive, fan etc: it has to come "only" from the top. Second, I wonder if an Imac with shrouds would be that beautiful... 🙂
I'm sorry all this has little to do with the generally excellent and so useful posts in the Discussions.
Only that it's what I was thinking when I bought my iMac, instead of a 17'' PowerBook or a G4. I was trusting that for a so well designed object, there would have been a strong bell-shaped frame hidden in the upper half of the sphere (to compensate the "sailing boat techniques"), and that the two "3 pins tool" articulations would have also been stronglier calculated.Plastique45 is right: as users, we should not have to even think of all that. But in order not to get back a faulty machine from repair, or to get it considered faulty when it gets loose so soon, I think we should send more
feedbacks, and stand firmly in the shops, in the interest of holding the high quality of Apple products we have always enjoyed, and for not letting it fall down to the same levels as other cheaper computer brands.Hope this was not too boring reading. 🙂
Axel - 0
n0k|a ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Well would you credit it ..................... It's the user who has a screw loose ............... table that the iMac was on was pi*d ...................... keep the table level and Yeahhhhhh
- 0
Brian Ishida ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
My iMac (15 months old) monitor support arm collapsed without warning right onto my fingers while typing. This computer is a resident desktop unit that was not abused, moved or even adjusted in height. Apple claims no problems reported and will not fix.
To fix, an authorized dealer quoted me $780 to replace the "neck assembly"($416) and labor!!! That's half the cost of the whole computer.
- 0
Keith Adler ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Don't be silly everyone! Don't take it to an authorized repair service, all you need is the right tool.
Personally, I'd get the "Neck Tool Pro" but the other will also work. There are no "worn out parts" inside the arm assembly, the bolts just need to be tightened. And since Apple wants a well-designed product, they didn't use an Allen key wrench like everyone else. So you need to buy a little tool and maintain the beauty yourself.
Either buy the Neck Tool:
http://macfl.com/store/catalog/productinfo.php?productsid=1652Or the Neck Tool Pro(which is a nicer wrench):
http://macfl.com/store/catalog/productinfo.php?cPath=9_11&productsid=1653I'm buying mine right now. I'm not going to follow the instructions inside that box either, because just a quick tightening will fix the problem ASAP.
Happy mac'ing all!
Keith
- 0
Stephen McCullough ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I am experiencing the same problem with my 17 inch iMac and I was wondering if the tool worked.
Thanks,
Stephen McCullough - 0
Harpsichord'94 ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Hi Keith,
Did any try fixing the loose arm using the tool (Neck Tool Pro Hinge Kit) ? I tried it, replaced the spring washers (that came with the kit), still have a sagging arm. Any other suggestions?
- 0
Matthew Cannata ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I have the same problem as brian. iMac is about year and a half old without applecare. my monitor came crashing down as well, and not a slow decent caused by a loose bolt that it sounds like many of these articles are referring too. it was as if something snapped ( a support spring perhaps) and gravity got a hold of the monitor. does anyone know if there is a spring or pin that is holding the monitor in place?
- 0
KBeat ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I bought a 17" (USB 2.0) for my parents last Christmas. Visiting them this past month, I noticed that with the iSight camera attached, the screen could no longer hold its position. I took it into the Apple Store, and they replaced the arm. It works perfectly now. Thankfully the machine was/is still under warranty. As this is an expensive repair, I went ahead and picked up AppleCare for the iMac.
Kip
- 0
Mace ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Has anyone had trouble with the screen not being horizontally level? Is there a way to adjust the screen to make it become level again? Does the tool reference earlier here help keep the screen level horizontally?
Thanks,
Mace
- 0
Joe Flory ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Hey Mace, I have the same problem. We got a used iMac, the screen isn't horizontally level either. I haven't been able to find anything on the 'net about fixing this problem.
Joe