Audio line-in for Mac Mini
apple Verified ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I was surprised to find that there is no audi input socket on the Mac Mini. While it is possible to use the USB port for input (with, for instance, a communications headset) many people possess headsets and other devices which still rely on jackplug connections.
7 replies
Sign in or join Beachball Help to reply.
- 0
Solid ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
The Mac mini is basically your no frills Mac, hence no audio input. In order to handle all those jackplug devices, this works pretty well:
- 0
Michael Evans3 ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Great and thanks. This is just what I need.
- 0
Barbara Brundage ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
If it makes you feel any better, you'd probably need one anyway, since audio-in is really for a line-level signal so unpowered microphones don't work too well that way.
- 0
Terry Allen ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
The Griffin iMic works fine but I have a problem which must be a Mac Mini problem. I have a fairly loud buzz at all times when the mouse is still. Move the mouse and the buzz goes away, and then comes back again. If I leave the mouse connected to the keyboard when I'm trying to record via iMic and Griffin's Final Vinyl the loud buzz is recorded. My keyboard and mouse are both Apple genuine. To make matters worse I had a hum problem which I isolated to an earth loop from the turntable. To try to overcome this I have fitted a transformer between the turntable and the iMic. That overcomes most of it but I still have a system hum. Can anyone help please?
- 0
Bryan Mortimer ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I also use an iMic for my mini.... I don't get the buzz.... I have two USB hubs connected, and run my keyboard and mouse into the one opposite the iMic....
also, most turntables need some sort of grounding.... you can buy a small preamp, or just go to the Goodwill and pick up an old receiver/amplifier....
run your turntable into the input, connect the ground wire between the two, then run a cable from the "Tape Out" of the receiver to your mac.....I use Roxio's Spin Doctor and it works fine.... good luck
- 0
Ken Kennedy ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
"I'm trying to record via iMic and Griffin's Final Vinyl the loud buzz is recorded."
Griffin's iMic works well for me but, Final Vinyl Is Serously Lacking. I get a very loud Hum when using this program. I suggest using Spin Doctor, part of Roxio's Toast Titanium.
The way I have my system configured: Hook turntable to a cheap mic mixer (most mixers have a grounding stud for the turntable) from the Amp out of the mixer to the mic input on the iMic and then into the Mini via usb. I use a Behringer VMX 100 DJ mixer but Radio shack makes a cheap mixer also. Using a mixer gives you volume and tone controls. Set your program's volume controls about half way and leave them there and use the volume controls on the mixer. Much easier than trying to change volume with a mouse.
Ken
- 0
Barbara Brundage ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
You might also want to try Audacity, which is free, if you don't have Toast already.