Netgear G router compatible with new iMac 27" N?
apple Verified ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I'm having trouble getting my bright shining new custom-built 27" iMac to connect to my Netgear G router. I thought the N built into the new iMacs was backward compatible: http://www.apple.com/wifi/80211/
What say you networking gurus?
13 replies
Sign in or join Beachball Help to reply.
- 0
Apple Support Community member ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
It should work fine. It would help to know more details. For example, is the network not showing up under the AirPort icon in the menu bar? Is it showing up and selectable, but not accepting the passcode? Does it appear to connect to the network, but Internet access is not working? Those are completely different issues.
As a method of trouble-shooting, I would try to isolate the cause better.
If possible, try connecting it to the router using an Ethernet cable first, just to confirm the Internet connection is working properly. If that is too difficult due to the relative locations of the Mac and router, you can skip it. But if you find that it still does not work, the cause is more than just the wireless not working.
Try disabling the security on the router temporarily. See if you can now connect. If it does not work, there is general problem with the wireless networking. If it works with no security, then you know the cause is related somehow to the security protocol being used. You can focus trouble-shooting in that area.
- 0
Apple Support Community member ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
The network shows up; along with MANY nearby that don't show up on my PowerBook. There is no passcode on my network. The iMac did appear to connect to the network, but now it doesn't even do that.
I do have a 50ft Ethernet cable for my Panasonic Blu-ray player firmware updates. I could try that.
There is no security on the router.
Thanks for your quick response!
- 0
Apple Support Community member ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
If you have another Mac (your PowerBook) handy, you can try another test. I assume the PoweBook can connect to the network and get Internet access?
Turn File Sharing ON on the PowerBook (System Preferences Sharing pane). With the new iMac and PowerBook connected to the to the wireless network, open a Finder window on the new iMac. Look under SHARED in the sidebar. Is the PowerBook listed there? Select it in the sidebar and see if you can +Connect As+ to do File Sharing. If that works, the iMac IS connecting the wireless network.
So if Internet access is still NOT working, it must be some networking setting that needs to be changed. And if that is the case, it is likely that the Ethernet wired connection will also not work.
If File Sharing does not work either, then the iMac may not be connecting the network at all, for some reason.
- 0
Apple Support Community member ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I'll work on that later today (1:23 am).
I noticed this on Apple's http://www.apple.com/wifi/80211/ site:
Computers using previous-generation 802.11a/b/g wireless technologies can connect seamlessly to 802.11n-based networks.
My network is G...
- 0
Apple Support Community member ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
As I said, if your router is 802.11g, there is no reason why a new iMac with 802.11n would not work.
- 0
Apple Support Community member ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I'm beginning to see a pattern in the light of day...
When I run Software Update and try to download a file (like Safari update) off Apple's Web site, the iMac takes down my Netgear G router. My base PowerMac G4 can't go anywhere on the Internet. I have to unplug the power to the router and wait a few seconds. Once I plug the power to the base router back, the PowerMac has access again. I go upstairs and the iMac and PowerBook (sitting next to the iMac) can now connect to the Internet.
So I decided to just Web browse for a while with the iMac. Worked great for about 5 minutes. Even Web browsing takes down the Netgear G router...
This is ongoing as I write this. I'm going let the iMac sit for a few minutes and see if it takes down the Netgear G. I'll report back on that.
- 0
Apple Support Community member ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
So I let the iMac sit there idling for at least 15 minutes. PowerMac computer had no problem on the Internet. Went upstairs, went to Web browse on the iMac and it wouldn't go anywhere. Tried the PowerBook, same thing. Went downstairs, couldn't go anywhere on the Internet. Unplugged the router for a few seconds, plugged it in and the PowerMac was just fine.
Since the iMac is coming down and Ethernet'd, I'm going to move it in a few minutes and connect via Ethernet cable to the router. Then I'll move the PowerMac out after I get the iMac set up.
- 0
Apple Support Community member ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I'm having a similar problem I,m using a netgear rangemax with my new 27" Imac and I seem to get knocked off the internet quite often. It also knocks off my 20" imac and my sons macbook. I have to reboot the netgear to get back on. It happens at different times but the one thing that is sure to make it happen is if I listen to music through Pandora. One or two songs and I'm knocked off the net. If I play pandora through my 20" I mac there is no problem. I think the new Imac should stay connected at least as well as the old Imac. I was also wondering if there could be a compatibility problem.
- 0
Apple Support Community member ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
tomd55,
Interesting that you seem to have a similar problem. Mine seems to be any Internet activity immediately shuts down the Netgear.
I've moved the iMac and connected to the router by an Ethernet cable. Working perfectly.
- 0
Apple Support Community member ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
So that is an odd problem. It definitely connects to the router for networking (either wired or wireless), and Internet access works. But for wireless, it somehow crashes router when the iMac is connected; for wired, there is no problem. So the problem is somehow caused by the iMac, but the problem itself is in the router.
On the router, there is often a recessed reset button that puts it back to the default settings. Have you tried using that reset? Also, most non-Apple routers have a config interface that is accessed with a web browser. I don't know what you might change, but you may want to experiment with some of the settings.
- 0
Apple Support Community member ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
+So that is an odd problem.+
Well, since the iMac was destined for its current location and connection, I'll just leave it alone.
BTW, next to my Viewsonic 22" LCD, the iMac is stunning!!! Got those Nemo fish swimming around on my desktop now.
- 0
Apple Support Community member ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
That'll work. A wired connection is reliable, faster, and more secure (although "faster" probably will not make any difference for typical broadband Internet access).
- 0
Apple Support Community member ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Thanks for your replies.