13 replies
Sign in or join Beachball Help to reply.
- 0
Radiation Mac ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Well, some interesting theories have been espoused for this question. The fact of the matter is that the issue of CRT versus LCD (with cold cathode backlighting) versus LCD (with LED backlighting) is irrelevant to the original question of Refresh Rate. The "Refresh Rate" on Any monitor is the rate at which the screen image is generated by the illumination of successive pixels on the screen, the image being "painted", as it were, from the upper left hand corner of the screen across to the right and successively down the screen row by row of pixels, until one complete cycle of screen image drawing has occurred.
There are two basic forms of this screen drawing, for those technically interested: "interlaced" and "progressive". On an Interlaced display the rows of pixels are illuminated by first illuminating all the odd numbered rows of pixels on the screen and then proceeding to illuminating all the even numbered rows of pixels. Older monitors used this method. On a Progressive display (the more modern and currently used standard for HD) the rows of pixels are illuminated successively: 1, 2, 3 ,4... in order from top to bottom of the screen.
The refresh rate for most LCD monitors is 60 Hz. The recent exception to this is high-end HD LCD monitors, some of which now utilize a 120 Hz or 240 Hz refresh rate. The advantage of this higher Hz rate over 60 Hz is that fast moving images on the screen show less lag or ghosting.
Hopefully this resolves some of the technical issues raised in this forum 🙂 - 0
Kenichi Watanabe ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I don't think "refresh rate" (as it applies to CRT displays) applies to LCD displays. The screen is not flashing on an off really fast like a CRT; LCDs have a backlight that is constantly on, and what's on the LCD itself stays that way until the actual image changes. There is such a thing as the LCD's response time, but that is not the same as refresh rate.
- 0
Scott Emeson ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Kenichi,
I'm not so sure you're right with your assessment of LCD's lacking a refresh rate. On my PC I have a 30" HD Cinema Display and when I go into the nVidia Control Panel it shows a refresh rate of 60Hz.
- 0
Scott Emeson ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Kenichi,
Out of curiosity, I found this on Wikipedia:
_Liquid crystal displays_
Much of the discussion of refresh rate does not apply to the liquid crystal portion of an LCD monitor. This is because while a CRT monitor uses the same mechanism for both illumination and imaging, LCDs employ a separate backlight to illuminate the image being portrayed by the LCD's liquid crystal shutters. The shutters themselves do not have a "refresh rate" as such due to the fact that they always stay at whatever opacity they were last instructed to continuously, and do not become more or less transparent until instructed to produce a different opacity. Most of the TFT LCDs used in portable devices and computer monitors need a continuous refresh. The driving voltage determines the transmittance of the liquid crystal.The closest thing liquid crystal shutters have to a refresh rate is their response time, while nearly all LCD backlights (most notably fluorescent cathodes, which commonly operate at ~200 Hz) have a separate figure known as flicker, which describes how many times a second the backlight pulses on and off. *However they also have a refresh rate that governs how often a new image is received from the video card (often at 60 Hz).*
Message was edited by: Scott Emeson
- 0
Kenichi Watanabe ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
On my iMac, the
Displays pane in System Preferences has no setting control for refresh rate. I expect that any display that Mac OS X can positively identify, such as the built-in displays on iMac and MacBooks, as well as the Apple Cinema Displays, will show no refresh rate control setting in System Preferences
Displays pane (because it is not relevant for an LCD) and Mac OS X know that display is an LCD.However, my second display that is connected to a Mini-DVI to VGA adapter has that control because Mac OS X has no way to know if it is an LCD or CRT. It is locked on 60 Hertz and I cannot change it.
- 0
jamesholden ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
The default for LCD's is 60Hz, although a few do go a bit higher mostly for specialist applications like those using 3D glasses etc, although for the majority of us it makes very little difference. There is no concern over flicker.
- 0
Kenichi Watanabe ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Makes no difference. The "LED" is just for the backlighting. The older displays use CCFL (Cold cathode fluorescent lamp) for backlighting. But the display itself is still an LCD, and works the same as previous LCD displays.
CCFL do
pulse on and off at an ultra-fast rate, so in that sense there may be some relevance. LED lighting probably does not have that pulsing effect. - 0
Kenichi Watanabe ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
What is the product (the software and hardware) that allows you to do this? Perhaps its system requirements will say. And it may be more a function of the GPU (graphics card) supporting the capability, Mac OS X being able to run the software, and the availability of Mac OS X hardware drivers for the "glasses"... and not the iMac's display itself. From the perspective of the products developer, it would make sense to support as many systems as possible.
- 0
coolangel ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Hi:
I've been thinking about buying a 27" imac but am curious about the refresh rate. I've read this thread but it doesn't really help me. Some of us are very much affected by refresh rates and if I use an LCD display that is below 75, it generally makes me sick to my stomach within a few minutes. So I don't want to buy the mac and then be sick. It's a whole inner ear problem that many people suffer from. Some people get headaches, I get sick. So if refresh rate isn't the correct thing, what should I be looking at? What about the connection itself? If I use HDMI port on my computer to my monitor, I can generally go lower without a problem. - 0
Kenichi Watanabe ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
CRT displays have a definite refresh rate, and anything below 75 Hertz (such as 60) is definitely noticeable by a lot of people and annoying. However, LCD displays do not work that way. The lighting is continuous and the pixels are always on; they do not flash on and off.
There is a thing called +Response Time+ and that indicates how fast an LCD is able to react to a changing image. However, the pixels that change are going from one state to another and are not flashing on and off, so it is not the same thing as refresh rate. With a CRT display, the entire screen is flashing on and off 75 (or whatever) times per second.
If the backlighting of the LCD is CCFL (cold cathode fluorescent lamp), it may act like the fluorescent lamps in office buildings, which can be annoying to some people. LCDs typically use CCFL for backlighting, and such backlighting does
flicker at an ultra high rate, so that may be what you are perceiving although it is unrelated to the refresh rate of the screen. The new iMac's use LEDs for backlighting, so it should not have this type of issue.So you should not have a problem of this type with the iMac's display.
- 0
Bill from Germany ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
The new iMacs have LED displays, not LCD. What difference this makes for the question at hand, I can't say.
- 0
Bill from Germany ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Thanks for the clarification, Kenichi. I really shouldn't mess with things I know nothing about.
- 0
testest ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I'm wondering because I need to be able to view 3d movies with active glasses on my computer.
Will the new 27 imac be able to do this?