Imported from the Apple Support Forums via the Wayback Machine 🔗
Hi milankovach
There is only 1 SATA connection on the inside for the Internal HDD.
There is 1 FireWire 400, 1 FireWire 800 and 3 high speed USB 2.0 ports on that iMac for connecting Drives and other Devices. If you have a second SATA drive in hand, put it in either a Firewire, USB External Enclosure or connect it with a universal drive adapter.
Dennis
0
milankovach·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I already have 3 externa case with harddrives.
I just bought 2.5" SSD and if there was two SATA connectors in iMac than I could just add this samll SSD inside iMac.
second question is: will SATA port multiplier work with iMac? (and witch one?)
Thanx!
0
den.thed·
Imported from the Apple Support Forums via the Wayback Machine 🔗
There is no room for a second drive.
0
milankovach·
Imported from the Apple Support Forums via the Wayback Machine 🔗
there is.
intel SSD X25-M is 2,5" and it can fit inside 24" white iMac (checked).
beside it use very little power so it never get hot.
0
den.thed·
Imported from the Apple Support Forums via the Wayback Machine 🔗
You'll fry he South Bridge I/O device and disk controller, it was only made to support 1 drive.
See > [iMac Developer Note|http://developer.apple.com/legacy/mac/library/documentation/HardwareDriver s/Conceptual/iMac_0408/Articles/ProductDeveloperNote.html]
0
milankovach·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I must admit that I do not know how SATA port multiplier works at all but from document you post I do not see anything unusual: iMac from 2006 use standard intel ICH7M southbridge chip (supporttwo sata port):