Snow Leopard Install bricked my iMac
apple Verified ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Installed SL from within Leopard on my 20" iMac. Rebooted and I got the white Apple logo screen and the spinning wheel. Nothing from there on out. It hangs. The worst part about it is I can't get it to respond to any boot commands.
It will not eject the disk
It will not boot to single user mode
It will let me select a startup disk
It will not even take me to target disk mode
Not only do I have a bricked computer, but I can't even get the SL DVD out of it.
I would say this is an isolated incident, but I also had trouble on my 24" iMac, but reinstalled and it was fine.
Any suggestions?
15 replies
Sign in or join Beachball Help to reply.
- 0
K. Scott Myers ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Restart the machine and hold the mouse button down. That will eject the disk.
- 0
hardyjc ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
No it doesn't. I tried it already.
- 0
Daniel Nolen Iii ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Did you install 10.5.8 right before Snow Leopard?
- 0
K. Scott Myers ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Have you unplugged the power and then plug back in?
Try Zapping the PRAM?
- 0
Robert Najera1 ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Does it let you boot to the SL install CD? Have you tried reinstalling, a second time? Have you tried booting into startup manager (Hold down Option) and ejecting the CD from there?
If you can boot back to the SL cd, run Disk First Aid and make sure the FS is good. Then try to reinstall SL again.
Does the computer sound like its trying to eject it, but just physically obstructed?
Do you have a bluetooth keyboard, or is it USB?
- 0
hardyjc ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
It was listed as 10.5.6. I don't think it ever go to 10.5.8
I did try to boot to the install CD (holding down C). It just does nothing at all. No matter which boot key shortcut I use, I still get the Apple logo with the spinning wheel of death.
Message was edited by: hardyjc
- 0
hardyjc ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I cant boot to the startup manager.
- 0
hardyjc ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Wired keyboard and mouse. No the computer does not sound like it is trying to eject the CD.
Just so you guys have some context: I have 5 Macs in my house and am an IT guy. This is just weird.
- 0
Carolyn Samit ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
HI,
Boot from the original install disk while holding down the C key to check the startup disk for errors.
Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu (Panther and earlier) or Utilities menu (Tiger and later) and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
*(Check S.M.A.R.T Status of HDD at the bottom of right panel. It should say: Verified)*
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
When you are finished with DU, from the Menu Bar, select Utilities/Startup Manager.
Select your start up disk and click RestartCheck available disk space.
Control or right click the MacintoshHD icon on your Desktop. Click "Get Info". Under the General tab you will see Capacity and Available. *Make sure there is at least 10% available disk space, 15% is better.*Carolyn 🙂
- 0
hardyjc ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Sorry if I am not being clear folks. The SL DVD is stuck in the computer. It will not eject. No boot key commands that have used are responding.
So Carolyn, I cannot boot from the original install disk, because the SL disk is still in the drive.
- 0
hardyjc ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
How those old school CD drives were nice with that little paperclip hole to manually eject!
- 0
Carolyn Samit ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
*"I cannot boot from the original install disk, because the SL disk is still in the drive."*
That's why I suggested you verify the disk for errors. You should be able to boot from the SL disk and use the Disk Utility application from there... by holding down the C key at boot.
To eject the DVD... try holding down the Eject key ⏏ while starting up...
🙂
Message was edited by: Carolyn Samit
- 0
tool ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Does your iMac have a Front Row Remote? If it does, you can use that to eject the SL disc when you restart the computer.
Also, are you trying to install SL on a machine running the PowerPC chip? SL will only install on Intel Macs.
Try these steps to eject the cd if you have the remote.
Holding down the Menu button on the remote while starting up an Intel Macintosh enters the Startup Manager (same as holding the Option key at startup). The remote can then be used to cycle through all bootable partitions and can then confirm them by pressing the Play/Pause button. This can be especially useful for Boot Camp users who might frequently use this feature to boot into Windows partitions on the Intel Macs. The remote can also eject CDs or DVDs in this menu by selecting the disc and then pressing the + (Volume Up) button on the remote.
- 0
Edward Caine ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
umm... phone Apple! Your SL is in warranty and has phone support!
Apart from that there is a hardware version of the disk eject - I'm not sure what it is though - ask the apple guy when you phone them!
Edd
- 0
hardyjc ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I tried using C at boot Carolyn. Unfortunately it still gives the the same logo screen with said spinning wheel of death.