Imported from the Apple Support Forums via the Wayback Machine 🔗
Hello, I have an amazing early 2008 Mac Pro that I want protected from surges and blackouts. Am I correct in assuming everything hooked up to my computer should also be plugged into the same surge protector? Because if I have a random external hard drive just plugged into the wall and the computer, but everything else is in the surge protector, couldn't a surge hurt my Mac Pro through the external hard drive?
And finally, how much power do I need in a UPS surge protector? I'll be connecting my Mac Pro, two external drives, two 30" Cinema Displays, a Time Capsule, my speakers, and an SxS USB reader, all attached to my computer by USB or Firewire.
Imported from the Apple Support Forums via the Wayback Machine 🔗
Thats what you need. 1500VA.
I dont know if you can put the 2 displays on there. How much do they pull?
Do not wait to get it. Mine has come on at least 25 times since last year.
0
Apple Support Community member·
Imported from the Apple Support Forums via the Wayback Machine 🔗
And make sure your modem, router, and ethernet cable are also filtered and protected coming in.
The wake from sleep is when the inrush current is at its highest. APC LCD will tell you what it is using.
0
Apple Support Community member·
Imported from the Apple Support Forums via the Wayback Machine 🔗
You use the term "ups surge protector" but most UPS's have very poor surge protection. They're designed to be power backup. For best protection, rather than connecting your devices directly to the UPS, use something like the Tripp Lite Isobar 8 Ultra <http://www.provantage.com/tripp-lite-isobar8ultra~7TRPL13X.htm>
Besides surge protection, it also protects you from low frequency noise and additionally provides isolation between the devices you have plugged in. It does a lot more than the minimal protection built into most UPS's. You really need both.
0
Apple Support Community member·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Thank you so much, you guys have been a huge help!
Tim
0
Apple Support Community member·
Imported from the Apple Support Forums via the Wayback Machine 🔗
So you guys think I should also have my router plugged into the surge protector? That brings me to ten cords that need to be plugged in, and only only 8 outlets on the unit. Plus, as someone here already mentioned, the two Cinema Displays might pull too much power to be included in the bunch. Now I'm more unsure than ever!
The Tripp Lite looks like a good idea, though. I'm looking into that one.
Thanks!
0
Apple Support Community member·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I'll take your word, but with APC RS series, I thought they did any needed filtering for RFI etc. And, if you do use APC, add their network protector. They guarantee your equipment, if you use approved add-ons.
I connect an APC network/surge to RS1500. I said above I don't think you are overloading it. I'd also be concerned with what else is on the same circuit.
And some people do use ZeroSurge line conditioner between the wall and UPS.
0
Apple Support Community member·
Imported from the Apple Support Forums via the Wayback Machine 🔗
To give you somewhat of a reference, I have the APC BS1500 LCD (pretty much the same as RS, except RS is better).
Connected is a Powermac G5 2.0 Dual core, 2 internal drives, 8 drive external enclosure, hardware raid pci card, 15" CRT monitor, firewall, modem, wireless router, and 1 external drive. All on the battery backup plugs. At idle it pulls about 220W (25%) and/or 23 min of up time.
Imported from the Apple Support Forums via the Wayback Machine 🔗
I'd plug the router in. Get two isobars if one isn't enough! Conversely, I wouldn't bother to plug external speaker power, mouse charger, etc. into the line filter, but definitely the computer, monitors, router, and switch.
0
Apple Support Community member·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I have an APC xs1500 for my mac pro 2 core system. The only problem is that APC tells me since 2007 that there is no powerchute software for anything above osX 10.4.8 so I am stuck with a piece of crap i think. They tell me to use the built in ups software under sysem prreferences- but when i look underhardware and energy etc - there is nothign about a pus there at all -- now what ?
0
Apple Support Community member·
Imported from the Apple Support Forums via the Wayback Machine 🔗
XS is lower level standard model sold by 3rd parties, not APC direct, and what you want is the LCD version to get more read outs and feedback.
It works in OS X, it just doesn't have the bells and whistles, for that you would need to run Windows and install PowerChute 2.2.
0
Apple Support Community member·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Just so people know that while the RS version doesn't have an LCD panel, it does show up in system preferences and is configurable under leopard and tiger.
0
Apple Support Community member·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Okay, there is RS versions with and without LCD, and LCD comes in 1300VA and 1500VA (I wouldn't go lower than those).
Imported from the Apple Support Forums via the Wayback Machine 🔗
I have a MacPro Dual Core Xeon, 2008, and I thought I was having power surges so I bought the APC RS 1500 back up power supply. As it turns out, maybe I didn't have a surge problem after all. Periodically, I begin to get a "thunk" like an error noise, and my dual monitors dip to black for an instant then come back up. If I run file system check, I get a notification that my system has been modified so I run it again until it gives me an "OK" report, reboot the machine and voila, the problem goes away at least temporarily. When it recurs, I do file system check again. Anybody have any thoughts about what might be happening?
0
Apple Support Community member·
Imported from the Apple Support Forums via the Wayback Machine 🔗
If you are really interested in quality surge suppression I would suggest you look into this product that I have used for quality electronics such as stereo, TV's and computer equipment. http://www.brickwall.com/ Most anything else is sort of a throw away product that may or more likely may not survive and protect a very direct lightning strike or extreme surge. Just my two cents.