Benches Mac desktops

15

FRAKENSTEIN ?? >.<

apple Verified

Imported from the Apple Support Forums via the Wayback Machine 🔗

im curios. . . if the Imac CRT MONITOR will be plug on windows CPU s it compatible?

15 replies

Sign in or join Beachball Help to reply.

  1. 0

    Kenichi Watanabe

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    If the iMac is the tray-loader, you can probably do it, because there is an internal video cable that you can simply disconnect. If you find the right adapter, you can bypass the iMac's
    computing parts and connect a Windows PC through a standard VGA connection.

    If the iMac is the slot-loader, it will be much harder, since there is not internal video cable that you can disconnect and adapt. It's a more integrated design.

  2. 0

    rccharles

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    This page lists the pin numbers.

    http://www.allpinouts.org/index.php/VGAto_MacintoshVideo

  3. 0

    Niteshooter

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    StepHgOdliKez wrote:

    im curios. . . if the Imac CRT MONITOR will be plug on windows CPU s it compatible?

    Are you looking at the cable with what looks like a standard DB 15 connector? It is not wired like a normal monitor cable according to Apple's service manual and therefore cannot be used as a monitor plugged into a mac with this connector.

    If it had been a std DB 15 then you could just get a DB 15 to VGA adaptor.

    Kevin

    <Edited by Moderator>

  4. 0

    StepHgOdliKez

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Im using Slot Loading . . >.>

  5. 0

    StepHgOdliKez

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Are you looking at the cable with what looks like a standard DB 15 connector? It is not wired like a normal monitor cable according to Apple's service manual and therefore cannot be used as a monitor plugged into a mac with this connector.

    If it had been a std DB 15 then you could just get a DB 15 to VGA adaptor.

    Kevin

    - - - - -

    Give me THE Links i wanna see wat type of cable/adapter they use to Imac CRT

    Actually i just want the CRT cz i dont wanna buy another CRT/LCD

    Its because the IMAC G3 Processor is very slow so . . my curiosity driven me to

    look behind the cover of IMAC G3

  6. 0

    StepHgOdliKez

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    hmmm

  7. 0

    StepHgOdliKez

    Imported from the Apple Support Forums via the Wayback Machine 🔗

  8. 0

    Kenichi Watanabe

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    That port in back is for mirroring the internal display on an external monitor. You cannot use it to connect the iMac to another computer as an external display.

  9. 0

    Niteshooter

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    StepHgOdliKez wrote:

    Are you looking at the cable with what looks like a standard DB 15 connector? It is not wired like a normal monitor cable according to Apple's service manual and therefore cannot be used as a monitor plugged into a mac with this connector.

    If it had been a std DB 15 then you could just get a DB 15 to VGA adaptor.

    Kevin

    - - - - -

    Give me THE Links i wanna see wat type of cable/adapter they use to Imac CRT

    Actually i just want the CRT cz i dont wanna buy another CRT/LCD

    Its because the IMAC G3 Processor is very slow so . . my curiosity driven me to

    look behind the cover of IMAC G3

    I get the funny feeling we are talking about two different iMacs

    Are talking about the internal cable, that IS the one I'm talking about. It will not allow you to use your CRT with anything else. This is a tray loading G3.

    User uploaded file

    User uploaded file
    The above is what I am talking about and guessing what you are talking about......
    Can't give you the links because this information is contained on the apple service source CD. Try a google search but be aware that they might not be out there and you need to know which flavour of iMac G3 you have.
    http://www.macobserver.com/article/2006/05/04.8.shtml
    Think you need to give us a bit more information on which iMac you are actually talking about as you are receiving answers that may or may not apply to YOUR iMac.
    As far as speed goes three things that will make the original G3 faster,
    -upgrade to a faster hard drive, for $40 get an 80GB 7200 rpm w 8mb cache
    -find a 333mhz cpu, the Bondi and second gen which had the mezzanine slot removed but was still the same MB could be upgraded since the cpu was on a daughter card. Both iMacs on the link below are upgraded to 333 mhz.
    -add more memory.
    Granted none of this will make it a super fast iMac compared to the G4 etc but will help.
    For the cost of all the changes above you could buy a used LCD or find someone giving away a CRT come to think of it. We just EOL 5 skids full of 19-20" Dell, Apple, LaCie crt monitors that's several hundred going to a LANDFILL sad. So perhaps check out your local Kijiji or Craigslist as they should be cheap.
    If you lived nearby I could have given you one, as we upgraded to LCD's and scrapped all our big CRTs at the Goodwill other than the one's I kept to do repair work. You could also try there or any local second hand stores in your area.
    Kevin
    <Edited by Moderator>

  10. 0

    Kenichi Watanabe

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    An earlier post indicated the iMac was a SLOT loader. The picture you posted is for a TRAY loader. They are completely different.

  11. 0

    Niteshooter

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Kenichi Watanabe wrote:

    An earlier post indicated the iMac was a SLOT loader. The picture you posted is for a TRAY loader. They are completely different.

    Ahh ok WOT then. Yes I know that the pix are from a tray loader I mentioned that in the text.

    I looked at the slot loader in my collection, no video plug must be on the newer one's.

    Tks.

    Kevin

    <Edited by Moderator>

  12. 0

    Kenichi Watanabe

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Yes, I don't think the earlier low-end models had it. But even on the ones that have it, it is hidden under a panel on the back side.

  13. 0

    Niteshooter

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Kenichi Watanabe wrote:

    Yes, I don't think the earlier low-end models had it. But even on the ones that have it, it is hidden under a panel on the back side.

    It looks like the first generation of slot loaders didn't have the VGA plug, that would be the 350 mhz I have which doesn't have firewire or AirPort capability either.

    I have an MB from a 400 mhz iMac with FW and AP slot and it does have the VGA plug. Only have the board so no idea how the monitor is wired. It looks like with some modifications I can swap that into my 350 but still need the side plate with the USB/FW ports even though the metal trim behind the plastic has the cutouts for the FW plugs. Even the MB has the soldier points for the missing components but seems to me to be simpler to just swap the bits.

    Kevin

    Some of my old Macs @ http://www.kevinomura.com/macintosh.html

  14. 0

    StepHgOdliKez

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Im still searching

  15. 0

    StepHgOdliKez

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Slot Loading 400Mhz current - **** THAT MAKES MY LIFE SHORT

    Thanks for the Info about the upgrade but the problem is I want to be enthusiastic Gamer It means I want my Processor BOOST FOR POWER and It has A VIDEO CARD. bad for the Slot loading Imac that there is no Video Card Installed(correct me if im wrong)

    Here's the Plan Using the Imac CRT for the Viewing Purpose and Ignore the Logic Board

    why I ignore the Logic Board? I will change it for ASUS MOTHER BOARD OR EMAC BOARD. by The Extension of Another CPU which is WINDOWS. .

    I will give you the VISUAL

    User uploaded file

    I wish someOne has the same vision ^_^

    User uploaded file

    Message was edited by: StepHgOdliKez