Benches Mac desktops

8

Killed Open Firmware

apple Verified

Imported from the Apple Support Forums via the Wayback Machine 🔗

Hey there,

I made a big mistake yesterday.

From the OS X terminal I activated the little-endian mode of the CPU and now my Mac mini gives me only the startup chime and that's it. Normally I'd here the CD-drive working afterwards, but it doesn't even come to that step. This also means, that I can't get into the OpenFirmware console to reset this setting.

I already tried to take out the battery of the Mac for several hours to reset the PRAM and NVRAM, but I had no luck.

Could you help me out?

Greetings

8 replies

Sign in or join Beachball Help to reply.

  1. 0

    Fortuny

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Hi,

    enter the Open Firmware as follows:

    1. Restart the computer.

    2. Immediately after the startup sound, press and hold the key combination Command-Option-O-F.

    3. Release the keys when you see a white screen that says "Welcome to Open Firmware."

    After you are done with it:

    type: mac-boot

    Press Return.

    I have no experience with Open Firmware because I have Intel-Macs, so I don't know which commands you must enter while in Open Firmware.

    Good Luck

    Stefan

  2. 0

    Larsen2k4

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Sorry, but this is the problem - The Mac won't even initialize the keyboard, so I can't get into the console of OF. 😟

  3. 0

    Fortuny

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Sorry mate,

    I didn't get the not-working keyboard from your question.

    Sadly I am not familiar with the PPC-Macs (I have only Intels), so I have no answers left.

    Maybe some 'veteran' PPC-User can chime in on it.

    Again sorry and Good Luck

    Stefan

  4. 0

    Godzil

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Hello, I have exactly the same problem with my iBook...

    Sad to see no one help you with this problem...

  5. 0

    FL_MacTech

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    So the machine is not even passing POST? Could you give what commands you used? You reset everything? PMU on the board, etc.. You may have killed your board.

  6. 0

    Godzil

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    In fact it seems to boot correctly but without working display or key command.

    When pressing the power button, the CD drive emit it normal sound, and shortly after the normal beep is emited. but nothing it doesn't go further.

    I try the PRAM Reset (Cmd
    Option+PR)

    I try the PMU Reset (Shift
    Control+OptionPower Button, wait 5, 10second and even long minutes) (With or without the battery in)

    I try to press the power button with the battery for a very longtime.

    I try too to remove the battery for hours (but not more than 20/21hr for now)

    I try the memory remove trick that help for removing OF password

    I even discover that the Firmware Upgrade procedure seem to be the same with PPC computer than Intel ones (From the stopped computer, press a longtime the power button, I will get the fan at high speed for a few seconds, a Bip (not the same as intel one) and the sleep light that flash speedy)

    I'm sure there is others undocumented things that can help to diagnostic what really happen, but I found nowhere informations about this, (even on official services manual that we can found using google, they say to replace the motherboard, but it doesn't do a lot of real test, and my case is not really the problem that this chart try to solve...)

    Maybe waiting longer will be enought. I can't remember correctly, but I think I already have the same problem long time ago.. But maybe I'm wrong...

    Maybe the only thing I didn't try is to reset PMU with battery & Wall charger pluged. But I don't think it will change anything...

    And I don't think it's a hardware issue (I think about the video problem that some iBook G4 have)

    edit: Ha yes I remember, the first time I did the same mistake wasn't on my iBook but it was on a PowerMac 7200 (or 7500, I have both mainboard) but reseting OF with this sort of computer is much easier (remove battery and push CUDA button..)

    Message was edited by: Godzil

  7. 0

    Larsen2k4

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Godzil, I'm so happy - you saved my day! It WORKS! πŸ˜€

    After I got my Mac back from my Apple certified dealer (who told me that the motherboard was defect!), I tried your ideas ... and finally I found out, that holding the powerbutton for 1-2 minutes solved the problem. It seems that this forces the firmware to reset itself (like the old PowerMacs) - because after about a minute of holding the button, my drives started up, the keyboard was functional and the firmware screen came up, so I could reset it.

    Finally my Mac mini is back - thank you so much! πŸ™‚

    The only thing that's strange, is that this possibility is written nowhere, and even the dealer wants me to sell 300 bucks for a new board...

  8. 0

    Godzil

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I'm happy that it help you, but mine iBook is still dead 😟

    I'll see with a certified dealer that give me the same answer than you (but the iBook motherboard is more expensive : 900€
    sick for a computer that have more than 3 years... Nearly 4 now!)

    I will try to contact directly some Apple tech, maybe they have a non written solution inside apple...

    If one of you Apple technician come here, please, contact me

    Thanks