Imported from the Apple Support Forums via the Wayback Machine 🔗
Hello,
Last summer I was talking to someone here for my Imac problems. It came to the fact the PAV is the problem of it all (unless the screen is dead..) so I ran to Ebay and found one for cool price.
The seller had good feedback and seemed MAC tech, I so ordered the PAV but when paying they said they made a mistake for the shipping so I had to pay a little bit more.
After few months nothing was arrived, I contacted the seller and he asked me to send in the receipt with a word stating I haven't received the product. Few emails and no reponses. Now it 's been 7 months and I'm on my *** cos I lost about $90.
So I checked the pav made some solderings etc.. but nothing has changed its dead!
So if you had the same experience or try to buy a PAV don't by from : WEFIXMACS
(nothing related to welovemacs which is a great shop)
I thought I'd share this with you. MAC collectionnor
Imported from the Apple Support Forums via the Wayback Machine 🔗
OS, Sorry to hear of your bad experience. I've only had a few on eBay. My standard fix is to switch the logic board of a 400/+ to a working 350 since I can get those around here for $25. When you had that PAV apart did you look at the soldering on the flyback? I've found ones with bad soldering there. I also hear there are HV caps that fail and even tho' I have an ESR meter, it won't check HV caps.
You were right to do a bit of soldering I have found bad solder joints on a lot of PAVs. I have one here right now that the display is green right side up but works fine up side down.
Richard
0
Apple Support Community member·
Imported from the Apple Support Forums via the Wayback Machine 🔗
hello spud,
thanks for your concern, I've heard about this swapping thing already but since I bought one I didn't think I wouldn't receive it...
the solderings I did were mainly for the actual block that send the Alternate votage to the screen and beside was a component that suffered but obviously those haven't solved the problem except now the comp doesn't show life anymore as for the back fly I can't see anything wrong with it but I should buy a tester even though if the whole stuff is dead there is no much I can do...
I have seen post about using the motherboard but need to change the power.. don't know if I'll make it right but I guess I can try
thanks
0
Apple Support Community member·
Imported from the Apple Support Forums via the Wayback Machine 🔗
OS,
the solderings I did were mainly for the actual block that send the Alternate votage to the screen
What are you talking about here?
and beside was a component that suffered
Suffered how? What component?
but obviously those haven't solved the problem except now the comp doesn't show life anymore
Well that sounds bad. Perhaps you created a short in the soldering?
as for the back fly I can't see anything wrong with it but I should buy a tester even though if the whole stuff is dead there is no much I can do...
No tester that I know of for a flyback unless it's an manufacturer's jig.
I have seen post about using the motherboard but need to change the power.. don't know if I'll make it right but I guess I can try Well need to know the exact CPU speed and type of iMac. Richard
0
Apple Support Community member·
Imported from the Apple Support Forums via the Wayback Machine 🔗
HI,
well I don't know how you call those so I tried to explain it.. It is on the side of the board, it is plugged into the flyback and goes to the screen.
The damaged component is two metal parts that were stuck together and obviously broke...
But I guess the board is dead.
my Imac is described below in my info (DVSE G3 400 mhz) I have two motherboards since people told me it was the problem but it is not...
anyway now it's pretty slow for the net. I wanted to use it just for this as I don't want to use the net on my G4 which has three HDs with loads of datas etc..
thanks for your help and concern regards
0
Apple Support Community member·
Imported from the Apple Support Forums via the Wayback Machine 🔗
OS,
It is on the side of the board, it is plugged into the flyback and goes to the screen.
That sounds like the anode lead. It clips into the back of the CRT.
The damaged component is two metal parts that were stuck together and obviously broke...
Sounds like a power resistor that blew up. Usually because of something else.
my Imac is described below in my info (DVSE G3 400 mhz) I have two motherboards since people told me it was the problem but it is not...
Well out of 75 I've worked on I have never seen a bad slot logic board. I do have one but I don't count that since it kicked around my basement for a year.
anyway now it's pretty slow for the net.
Not really my kids use their 400 and 600 iMacs all the time. Around here in Chicago I can buy iMac 400s for $25. $70 for a nice iMac 700.
Richard
0
Apple Support Community member·
Imported from the Apple Support Forums via the Wayback Machine 🔗
hey cheers for your support,
well I can't find cheap imac as u do...
I also didn't want to buy a second one since it is heavy and then u got parts everywhere and I already got many macs that need repairs...etc.. so my room looks like a computer's garage except my electronic knowledge is small and I keep buying parts...