Benches Mac desktops

15

install OSX 10.4.7 on iMac G3 creates pan…

apple Verified

Imported from the Apple Support Forums via the Wayback Machine 🔗

Hi,

I got this iMac G3 with OS 9.1 installed on the hdd. I first updated the firmware and then swapped the hdd for an empty one (with was once used on a windows system)

I try to install OSX 10.4.7 (original grey cd's for iMac) on my iMac G3

Short after reading the cd I get the following screen: grey with a black window witch says: "you need to restart your computer .Hold down the Powerbutton for several seconds or press the restart button" in several languages.

shown over this screen I see multiple lines with several panic and kernel messages.

the first line says: panic (cpu 0 caller 0x002E49D0): unable to find driver for this platform: "Powermac2,1".

I pressume that the last line mentions the problem witch causes the hanging?

Last line says:

Kernel version:

Darwin Kernel Version 8.7.3: Tue Aug 8 18:13:19 PDT 2006; root:xnu-792.11.2obj~1/RELEASE_PPC

panic: We are hanging here...

I strolled off the internet using this last message to find an answer for this "panic" but no results.

Pressing d or c while starting up doesn't matter, I instantly get the screen as discribed.

I did reset-nvram and then reset-all, still the same screen shown.

And yes, I'm new to the "appleworld", I've had it with windows, so hopefully i'm only making newbie errors 😉

Anybody here who can help me out?

PS: i made a picture of the screen, but don't know how to upload it here (might not be possible anyway)

15 replies

Sign in or join Beachball Help to reply.

  1. 0

    Klaus1

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Does your G3 met these?

    Minimum System Requirements for OS X 10.4 Tiger:

    • A PowerPC G3, G4, or G5 processor

    • Built-in FireWire

    • At least 256 MB of RAM

    • DVD drive (DVD-ROM), Combo (CD-RW/DVD-ROM) or SuperDrive (DVD-R) for installation

    • At least 3 GB of free disk space; 4 GB if you install the XCode 2 Developer Tools

    More information here:

    http://docs.info.apple.com/article.html?artnum=301341

    Secondly:

    swapped the hdd for an empty one (with was once used on a windows system)

    Did you reformat that drive to Mac OS Extended (Journaled)?

  2. 0

    malle eppie

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Thanks for responding, Klaus,

    I'm not sure about the built-in firewire, where can I check?

    I've 512mb intern

    DVD player (Slot)

    I didn't format the hdd for mac, cause i figured that formating a hdd would be a build in feature on the iMac install cd...

    Does the panic messages make any sense to you?

  3. 0

    Klaus1

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I'm not sure about the built-in firewire, where can I check?

    Yes, I am not sure if G3's came with firewire. Look in the Apple Menu under About his Mac, that will tell you.

    i figured that formating a hdd would be a build in feature on the iMac install cd...

    Nope!

    You can do this in Disk Utility.

    The hard disk not being correctly formatted will probably have given you those 'panic messages'.

  4. 0

    malle eppie

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Hi Klaus,

    Well, I swapped back the hdd so the iMac runs OS 9.1 again.

    The systeminfo tells me that it has firewire (also 2 firewire ports on the side of the machine), the processor is a powermac G3, it has 2 memory banks each 256 MB. a Slot-in DVD player and 20 GB hdd. So it meets al system requirements

    Now I restarted the machine holding down the d button (witch was mentioned on the label disk 1 to check the system). Nothing happens, it just starts up in OS 9.1

    I restarted again holding down the c button (also mentioned on the label of disk 1 to start up from OSX cd). I get the same screen as mentioned in the first post.

    The weirdest part is that this hdd is at least formated for mac, cause OS 9.1 is installed....

  5. 0

    Klaus1

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Try just inserting the Tiger DVD and double-clicking on the icon of the disk. Do you not get the installer package/s?

  6. 0

    malle eppie

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Indeed, i can see some folders and other things.

    I read somewhere that i should read the install document first. when i double clicked it, it says that it's not possible to open this file with os 9.1

    After I double clicked the OSX installer, the machine restarts, and yes.... the screen with all panics pops up again....

    I fear that the iMac is in some way not required, but do hope there are mutiple options left....?

    thanks sofar anyway, klaus!

  7. 0

    Klaus1

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Are you only running OS 9 (Classic) on that Mac?

    Does it not boot up in Panther?

  8. 0

    malle eppie

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Yes, I'm only running the classic OS 9.1 version.

    If I would like to boot it in Pather I would need a OSX Panther version I guess? Or are there any (free) upgrade kits?

    Now you mentioned Panther, I figured it might be a necessary sidestep to install Tiger in the end ?!

  9. 0

    Klaus1

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I am confused. You say that you only run 9.1 yet your signature states that you are on 10.4.7 which is Tiger?

    Did your G3 iMac not come with Panther pre-installed or did it pre-date OS X?

  10. 0

    malle eppie

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I'm sorry, didn't mean to confuse you. I was a little ahead of the facts while filling in the states, I now changed it to OS 9.1.....

    I got this iMac G3 second hand with OS 9.1 installed. It's an ex company machine, and they sold several iMac's to employees. I got it from an employee, over a year ago, but didn't use it untill now. I bought the original OSX 10.4.7 (2 cd's for iMac) from someone else.

    So my G3 iMac didn't come with Panther, and I actually don't understand what you mean with pre-date OS X.

  11. 0

    Klaus1

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    You have answered the question about pre-dating OS X by confirming that it came with only OS 9 installed.

    Do you still need OS 9? I ask this because the easiest way to proceed would be to wipe the hard disk and only install the Tiger disks.

  12. 0

    Henk Doorenspleet

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    HI Eppie (gek hoor)

    I upgrade a lot of G3 from OS9 to Tiger. As we speak/type I'm doing a G3 500 MHz. I created a Tiger clone on a Hard disk so I can do the upgrade also on G3s without a DVD player.

    The process USED to work smooth until a few minutes ago:

    -- I upgraded my clone to 10.4.11 first: the clone disk was connected to a already long ago upgraded G3: went well

    -- I upgraded the OS9 G3 on the firmware level

    -- Tried to boot the G3 from the clone disk>>>BANG crash

    -- Fortunately I had also a 10.4.4 clone on the same disk (other partition) and the target booted very well from that partition.

    Conclusion (until now)

    iMac G3 with OS9 on the HDD and upgraded firmware won't leap to recent versions of tiger (I don't know where the break point is it's between 10.4.4 and 10.4.11

    I'm right now transfering 10.4.4 and for the sake of the experiment I will look after the the target G3 is running 10.4.4. if I can boot from the external HDD partition with 10.4.11. If it works I'll transfer that one and having a clean 10.4.11 on a 7 old imac

    Hope this helps

    Henk

  13. 0

    malle eppie

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Hi Henk,

    It sure helps a bit. I'm first gonna try to format another disk suitable for mac, and then cross my fingers while inserting the install cd 😉

    Please share the results of your experiment, I just might need to take a simular D-tour, getting 10.4.7 working on my iMac G3...

  14. 0

    malle eppie

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Hello Henk,

    I did format the new hdd using OS 9.1. then I swapped the hdd's so now there's a blank hdd, formatted HFS+ inside of the iMac G3. Inserting the install disk gave the same errormessages with wich I started this tread.

    Installing OSX 10.4.7 on a blank (formatted) hdd doesn't work. do you have a boot image with 10.4.4 for me? maybe on a disk...

    Or else, please advise me on the next step(s)....

  15. 0

    omegaboomer

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Hoi malle eppie,

    Heb net je posts gelezen en vroeg me af of je al een oplossing hebt gevonden.

    Ik heb namelijk PRECIES dezelfde kernel panic. Als je meer weer hoor ik het graag.

    Groeten,

    Omegaboomer