Benches Mac desktops

5

Mac mini to X2gen LCD monitor displays "Out Of ...

apple Verified

Imported from the Apple Support Forums via the Wayback Machine 🔗

I'm having a problem with a new 19" LCD widescreen monitor I just bought. It includes both VGA (what I assume is standard?) and DVI input on the monitor, but did not invlude a DVI cable, so I bought it seperately.

When I plugged the DVI cable into the monitor and turned it on, I got an "Out Of Range" indicator on my monitor's screen. When I looked in the Troubleshooting section of the manual, that wasn't much help either. In badly written English, it told me:

"When the video signal of your computer exceeds the frequency range of monitor (refer to product specification), the micro-computer of monitor will turn off the sync signal of horizontal and vertical for the purpose of monitor protection. Please set the output frequency of your computer within the acceptable range of monitor so that the monitor can work normally".

And when I went to the X2gen website to look up a FAQ, it said:

"An out of range error means that your video card is transmitting a resolution or refresh rate that your monitor cannot support. This is most likely due to an outdated video card driver. Please visit your video card manufacturer’s website (support section) to download the latest drivers. If these do not work, you can check with the computer manufacturer."

The problem is none of that makes sense to me.

_+*So here is my question:*+_

What terminology or number range should I be looking for in my monitor's sepcifications to find out what the acceptable range is? Once I find that out, what dialogue box in Apple OS should I be going into to fix and adjust that range? Also, is it possible to download new drivers to a Mac mini? I know Intel makes the graphics chip, does anyone know where I could find out if they provide new/free drivers for it?

Many, many thanks for the help, I just spend 50 dollars on this cable and really need it to work.

5 replies

Sign in or join Beachball Help to reply.

  1. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    ... problem with a new 19" LCD widescreen monitor...

    Was this monitor sold to you as being "Mac capable?" Have you tried different settings in System Preferences for resolution?

    Personally, I'd return the monitor, spend a few dollars more, and get a product from a more reliable and better-known company.

    Message was edited by: clintbradford

  2. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Problems like this are tricky because, if you don't have a useable screen, it really limits what you can accomplish, to say the least. But let me ask some questions and also make some comments.

    First a question; you say you spent $50 on a DVI cable. My question is, is it a really long cable? Otherwise I can't imagine why it would cost so much. If it is a long cable, could it be that the incompatibility is coming about because the cable is longer than the 5 meter maximum allowed by the DVI spec? And if the cable is normal length, consider returning it for your money back and buy a more reasonably priced one. I recommend monoprice.com for good quality cables at great prices.

    OK, with that out of the way, let me offer some information and advice. First off, don't waste any time looking for drivers. You won't find any for a Mac. The way a Mac gets the necessary driver for a monitor is directly from the monitor through a data channel embedded in the video cable. The driver data, called EDID, lives inside the monitor in a ROM. When you connect the two, the Mac reads the ROM and gets all the information it needs to configure the graphics card to drive the monitor. Here's the rub; since Windows has for years relied on the user installing a driver via a download or via media supplied with the monitor, many monitor manufacturers have very poor implementations of EDID. That could be what's happening here. The EDID data in the montior's ROM might be incomplete or inaccurate and the Mac has critical reliance on this data being correct.

    There are ways to recover from such situations but you will have to jump through hoops to do it. If you can't get any kind of working screen from the Mac, say by booting in Safe Mode for instance, then the only way to recover from that type of situation is to set up the mini as a VNC server and then use a second computer on the same network running VNC client software. In this way you will be able to see the mini's screen on the second computer and remotely change settings. Once you get that working, you will need a program like SwitchRes X on the mini to custom build a timing for the display. All of this is possible, but it's a lot of trouble unless you are extremely adroit with such things.

    In the end, you may be better off taking clintbradford's advice and getting a different monitor from a more recognized brand that supports the Mac.

  3. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I would never trust a hardware company whose Web site's front page contained five exclamation marks...(grin).

  4. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I bought the monitor because it was on clearance from $230 to $140. It works fine with a VGA cable (which it was supplied with), but the monitor is a weird spec that doesn't work with Mac DVI ports. How noticeable is DVI on an LCD monitor, anyway? I really just wanted that extra bit of performance. I returned the cable and am now just using it with the VGA cable it came with. I'm coming from a tiny 15" CRT, so 19" widescreen is definitely an improvement over that, in any case, and at a significanly low price for a flatscreen monitor.

  5. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    The difference between VGA and DVI depends somewhat on the monitor concerned, but typically DVI will give you a brighter, more uniform image that is both more crisp and with better contrast and color saturation. Some will give more noticeable results than others, though unless you have DVI and VGA connected displays side by side and therefore have a direct means of comparison, the chances are you won't really know what (potential) gains you're missing.

    There is also a difference in maximum resolution between the two, with DVI being able to go slight higher, but since resolution is dependent on screen size, that won't have any impact at all on your system, since your display isn't anywhere near large enough to hit that issue!

    If you're happy with the display quality in VGA mode, then I'd say at the price you paid, you have a good monitor!