Benches Mac desktops

14

I Fixed My Noise Problem

apple Verified

Imported from the Apple Support Forums via the Wayback Machine 🔗

Hey Gang-

I have had my "Rev A" (no naming-convention controversies please!) for almost a year now. I was absolutely convinced that the noise level had increased during the life of this machine, but I really had no way to "quantify" the noise, either current or when the machine was new.

Fast forward to last week-I was perusing the boards and someone had mentioned that the "midplane assembly" was no longer a user replaceable part, but that some folks had luck in quieting their machines by replacing said assembly.

What caught my eye, and was subsequently ordered, was part number 076-1193 "Fan Kit, Upper, iMac G5 20inch". I listed as my symptom on the order page "excessive fan noise".

The fan kit arrived today, and I just finished replacing it. Although the directions were not 100% correct (feedback sent), I was able to complete the necessary steps and replace the two upper fans.

I am sitting here before the unit now, and I can assure you that it is now substantially more quiet, or less noisy if you will. I now have the slightly audible "humming noise" that comes from the lower left of the unit, but alas, I did not replace that fan.

I have used the unit for over an hour, and have stressed it to the point where all the fans are spinning in excess of 2000RPM (the former point at which takeoff airflow was assured) and the sound level only increases a small amount proportional to the fan speeds.

I am quite happy with this fix. I am sure personal mileage may vary, but it seems to have done the trick here.

Good Luck!

14 replies

Sign in or join Beachball Help to reply.

  1. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Maybe you (and others) can also get the lower fan kit to replace it as well, then perhaps you will have a near-silent Mac.

    What was 'wrong' with the directions, if you don't mind sharing?

    Your's is a 1.8GHz unit? It is a G5 iMac Rev A, no controversy to it at all.

  2. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    The directions mention removing a fan shroud held in by either "two philips screws or allen screws" (allen driver conveniently included with the kit, by the way).

    In my particular case the shroud was held in by two different sized torx-type (kinda looks like a star-shape) screws. One was an M6 size and one was an M8 size. As I explained in my feedback to Apple, most people do not have these types of drivers just laying around their house. I am a "tool guy" and just happened to have a set that included the proper sizes.

    I am hoping that they will be sensitive to that potential need of folks doin it themselves, and perhaps include those drivers in the kit as well.

    Good Luck!

  3. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Hi, Mine hums. Is that noise? I do not know what version of the iMac I have. Here is what I get on Get Info:
    Machine Name:     iMac G5
    Machine Model:     PowerMac8,1
    CPU Type:     PowerPC G5 (3.0)
    Number Of CPUs:     1
    CPU Speed:     1.8 GHz
    L2 Cache (per CPU):     512 KB
    Memory:     512 MB
    Bus Speed:     600 MHz
    Boot ROM Version:     5.2.2f4
    Serial Number:     xxxx
    Is this a version A? I have Apple Care;Care. Does Apples send the parts free or did you gave to pay? If you had to pay, home much for the parts? How did you contact Apple with the problem? Thanks.

    Ed Levine

  4. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Viper:

    Presumably on the 20" model the lower HD fan is not replacable without replacing the midplane. The other two at the top are replacable.

  5. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I really don't know what the midplane is, but hear it closely compared to the motherboard, so wonder why it's called a midplane.

    Regarding the fan, I wonder why that's not an option to replace in the events of excessive fan noise - midplane or not)?

  6. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Yours might be a Rev B, as it shows also being 17", in your Computer info.

    Rev A only had the 20" unit at 1.8GHz, Rev B had the 20" at 2.0GHz, so the 17" might have been 1.8GHz, but I don't recall.

    AppleCare should cover all requisite parts, and I think you go here for help.

  7. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    It would be nice to attend to such details as the Torx screw is not a common type of screw driver, and one I'm not sure I've got myself - not that I'm a tool geek.

    Or, just use either phillips or allen screws in the kits.

  8. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Viper is correct. That is the link. Thanks!

    My repair was actually covered under the warranty I do believe. My past positive experiences with AppleCare would lead me to believe that the deal would be the same if one's machine were covered.

    The fans were covered. In fact, Apple does not want the old fans back. By the way, the new fans appeared to be identical to the old fans, so it will be interesting to see if the noise level increases over time.

    "Excessive fan noise" was an option in a pull-down menu on the DIY page, so I suspect somebody at Apple is all over this.

    Good Luck!

  9. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Good point about including the correct screws.

    One is still left with the dilemna of how to remove the "old existing" screws in order to replace them with the common ones that you propose.

  10. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Awww, I didn't know that. But perhaps that's a sign that Apple changed the screw types as the manufacturing process progresseed.

    They still ought to have included the right driver for the screws they want to use - agreed.

  11. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Viper-

    From what I understand the "midplane assembly" was at one time a DIY repair part. I visited the DIY page simply because I wanted to see for myself what it was about.

    I have seen in other threads where folks have had all 3 fans replaced. That would seem to be a little more intense than what I did. And again, I was just curious and it was more like "oh, look what I found!".

    Still quiet enough for me though.

  12. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Ed-

    You might want to not publish the serial number of your machine on the web.

    I am not sure exactly why you don't want to do this, but it doesn't seem like a prudent thing to do. But I digress.

    Try going to the DIY page, enter your serial number, abd proceed throught the menus and see what is available for replacement. THAT is exactly what got me started down this path.

    Good Luck!

  13. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    If it helps, I have the "ambient light sensor" or rev B model. It has a small clear bump (the sensor) at the back of the bottom grill, about 2" to the right of center. It can be felt with a finger.

    The system profiler lists the machine model as "PowerMac8,2" so it might be more accurate to refer to it as a 'rev 2' model, but the "A" & "B" designators seem to have stuck, thanks to Apple's less than inspired naming conventions.

  14. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Torix not common?? You can pick them up at Home Depot. That's common enough for me;)

    Question, what noise did this get rid of? Was it the whine?

    I did not think mine was too bad until we had it down stairs for a couple of weeks where the whine was clearly audible. It was in our home office where there were several other PCs making a lot of noise. Most of those PCs going to be moved to my "Lab/Server room" in the garage soon so the office is going to quite down. Once I get another iMac, one of the new ones, the older one going to stand out if it's fans are not replaced.

    Thank god Apple released a fan replacement kit. So what do you have to tell Apple to get the kit other then my iMac has a loud whine?