2nd Generation Screen Failure Read This!!
apple Verified ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
My ipod 2nd Generation has a white Scrren.. not all the time. Sometimes restore will cure it sometimes not. Always when it is switched off and on again it has some fuzzy grey lines across it then remains white.
THIS IS A SOFTWARE PROBLEM.
Since iTunes7 the display on my nano has not worked properly. Everything else is fine.. I suspect it is trying to update with the wrong iPod software maybe a shuffle or something else. Restore only works sometimes and then fails once the nano is turned off.
It is virually impossible to revert to the previous software/firmware so we are stuck.
if you have had this problem then add your name to the thread. If enough people do it Apple might just listen long enough to fix it....
15 replies
Sign in or join Beachball Help to reply.
- 0
dolsberrd ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
My ipod gen 2 nano has the white screen of death. it plays, it syncs, but screen is just white. Once in a while it will briefly pop up with the menu, or as a nice alternative to the white screen, it will be white interlaced with blue verticle lines, heavier on the left than the right (nice random pattern). My ipod is about 2 years old and has not been immersed or dropped and is always in a case. love the ipod. hate the hassle.
- 0
MacDE ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
thanks for the reply.
but if the battery would be the problem then the display should work when connected to power?
How do you explain this with battery:
I got it from my mom because she said its broken. I restored it. It worked fine. after lets say 2 minutes (I do not know the default time) the display switches off by itself to safe energy. Then I press a boutton: White sreen of death!
Ok, I thought never mind, put it away, I have my 60GB iPod and Iphone, so there is no need for the nano. after two months I restored it again. It worked! no display issue! I unplugged it and listened to music for 20 minutes constantly spinning the clickwheel, so that the screen will not switch off. It worked the whole time, battery symbol was still 100%full. Then i put it on the table to see what would happen. Immediately after the screen went dark i pressed the click wheel: White screen of death! (music still playing correctly, illumination correctly)
correct me if I am wrong, but do all the people in this thread and the other ones have battery issues? I allways thought the illumination is the power demanding thing not the screen itself.
more threads on apple discussions about this issue (only from the first 8 pages):
http://discussions.apple.com/thread.jspa?threadID=2188361&tstart=0
http://discussions.apple.com/thread.jspa?threadID=1815094&start=0&tstart=0
http://discussions.apple.com/thread.jspa?threadID=2119967&tstart=45
http://discussions.apple.com/thread.jspa?threadID=1815094&tstart=60
http://discussions.apple.com/thread.jspa?threadID=1980883&tstart=75this post describes what i would expect from battery issue:
http://discussions.apple.com/thread.jspa?threadID=2124642&tstart=45oh i forgot:
I downgraded the firmware to 1.0.1 and 1.1.1 same issue!!
thank you!!!
- 0
dolsberrd ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I have this same problem. Restore always gets me my menu back. As soon as it turns off i'm back to no menu. no amount of toggle hold and reset gets me even the apple logo back - always just white. if you find out how to get software ok, I'd love to know.
- 0
flsailor ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Add me to the growing list of people with this problem. I've restored twice now and as soon as Ipod is disconnected from computer, White screen is all I get. Reset doesn't work. By punching menu it will play music but who knows what songs will come up because the screen is WHITE!!!!!! Wondering if anyone has paid the $29 for tech support and gotten any results? Seems to me Apple should fix the problem at no charge to us since it appears it is a software problem they created!!!
- 0
deggie ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
"Seems to me Apple should fix the problem at no charge to us since it appears it is a software problem they created!!!"
Really? So then all 2nd Generation Nanos using iTunes 8.2.1 have this problem? Oh no Mr. Bill!!!!!
Let me go check my Product Red Nano 2nd Generation since I am running the latest iTunes. Standby
Standby
Standby
Standby
Standby
Nope, hit play, screen is working fine, everything is OK. You scared me there for a minute. That Nano is my alarm clock with my Zeppelin. Glad there isn't a software bug. Or else mine would have a white screen also. Much more likely that it is:
1. A battery problem or
2. A logic board problem or
3. An LCD screen problemIf you are attached to yours you can send it to
http://www.iresq.com and let them diagnose it, or use Google to find other 3rd party repair sites. - 0
Juicebox Jazmin ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
My ipod (2nd gen) has a blank screen after I turn it off and back on later. I thought it was from my ipod dock (sonashi) but I've read it happening after the 7.7.1 itunes update? I'm not sure, it plays music still with a blank screen, and usually works 1st time after resetting (sometimes have to do it twice) and coloured lines come up if I press buttons, blue, red, yellow or pink. Is it dying? I want a need ipod anyway, but it's a while before xmas, and the warranty has run-out
- 0
moltohappy ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
yep, me too, happened after years of using it daily, after i bought a new JBL dock... could that have anything to do with it??
5R's do nothing. out or warranty, can't replace. Restore settings made it work for 30 seconds... - 0
ambre ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I think I have a similar problem. When my Nano is connected to the computer, it seems to function just fine. It also says it is fully charged. As soon as I disconnect from the computer, whatever screen it was on freezes. I can't use the scroll function or anything.
- 0
moltohappy ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
no. problem persists, also whilst plugged in.
this week, one day, i left it at home, plugged in (via jack, not the dock) to the stereo and when i got home it seemed to have stopped jumping about.. after 2 mins of using it, it started to jump again.
doesn't appear to be battery, cos it retains it's power perfectly.the screen isn't white, as others have described, but the menu jumps up and down and settles as if it were so far up that i see the first line of the menu (heading) and the rest is white. when i move through the menu, sometimes i see the menu jumping, one over the other, other times i only see a white screen with the heading at the top.
plugged into the computer, i see the DO NOT DISCONNECT message, but it jumps up and down and there are two, one over the other...
??
- 0
elisarose ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I'm having the same problem with my 2nd gen nano. Like the others said, it is usually a white screen, although occasionally white with blue lines or the menu screen will show up. I've tried multiple resets and restores, but no luck.
How frustrating! I am surprised to see that others are having this problem, as I thought mine had just stopped working because it was old or something. Hopefully this can be fixed, or I'm going to end up buying a new one... - 0
Hoch ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
This issue recently began on my ipod. Initially it seemed the issue would happen at the end of a podcast or playlist, and would require a reset to bring the screen back to life. Now nothing seems to help, other that occasionally the screen comes back to life on its own. The interesting thing is, that if you can remember your "keystrokes" on the clickwheel, you can blindly navigate the menus, select and play music podcast, etc.
- 0
moltohappy ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Ok, it was just a question of time.Mine is dead too now... all white, no text, not even jumping.
yes Mike, if i can remember the order, i can still navigate, which is mad!
so...
has anyone successfully changed the screen and got it working again? i've seen that there are instructions on the internet... - 0
mare88 ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
i have the same problem. ive had mine for 2 years and its worked perfectly fine till now. it did the white screen with blue lines when i had it on for a long period of time. so i restarted it and it came back to normal. but it did it again and it wont come back. and yes the 5 r's dont work. nothing does.
apple should help us with this since theirs enough of us with this problem. what a dumb software problem. and ya if you knew your menu options off by heart you can find your music but if you dont remember then your out of luck. my screen doesnt even turn on when its plugged into the computer.
Add ME TO THE LIST!
- 0
MilitaryWife ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I've had my 2nd Gen iPod Nano for about 3 years, and it just started having the screen failure issue. I recently went to an Apple Store to see if they could help beyond the 5Rs. Once they looked at the iPod and saw the white screen (showing off its few green and blue lines amoung the gray mess), they told me to just upgrade to a newer iPod.
if anyone found a solution to this issue, I would love to hear it, I don't want to spend the money on a new iPod.
- 0
jimmygourd ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I also have the ipod nano 2nd generation with the same screen failure issue. It only displays scrambled lines. The back light is fine it syncs properly and even place when controlled by my car stereo. Looking at the number of posts and the number of times this topic has been viewed, it would indicate this is a design flaw. I spend allot of money and expect a company with the reputation of great customer support would want to respond to this issue. I will give the support group a call and submit this argument and suggest others do the same.