Imported from the Apple Support Forums via the Wayback Machine 🔗
Sorry folks, this is kinda hard to explain. Hopefully my question is clear. I need to preface with a little info.
I just bought a 160gb ipod classic. It came with a usb sync cord that I will use at home. My question is regarding an older 3rd generation sync cord that I bought from apple for syncing my old 3rd generation ipod with my office computer (a windows machine).
A brief background on my older ipod:
The 3g ipod was basically powered via firewire in those days. Those ipods wouldn't draw power over usb so the only way to charge them was to use firewire or plug the sync cord's firewire end into the boxy white firewire power pack that plugged into the wall.
My work machine didn't have a firewire port (still doesn't), so I bought Apple's usb sync cord at that time: a sync cord that had two leads coming out. One lead was the usb connector that plugged into the pc and the other lead was a male firewire plug that connected into the white, square, firewire power pack.
My question:
Can I safely sync my new 160g ipod classic to my work machine with this 2-lead sync chord, usb plugged into the computer while the other lead is plugged into the power pack (which is plugged into the wall)? Or do I need to buy a new single-lead usb sync cord?
Imported from the Apple Support Forums via the Wayback Machine 🔗
It is probably fine. BUT, first try plugging only the USB portion from computer to iPod first and leave the Firewire side unconnected. Check and see if it charges. If it does, that means the power lines are hooked up in the cable itself and you may not want to hook up the Firewire cable as I am not sure how the iPod will handle both USB and Firewire power coming in at the same time. If it doesn't charge on USB only, then go ahead with the Firewire. Those old 3rd generation used that cable because the dock connector on the iPod itself didn't have the USB power pins connected. But I don't know if the cable came preloaded with all four USB wires or not, so that is why I suggest the above to check USB first by itself. Patrick
0
Bellanzo·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I also upgraded from a 3G to the Classic and have been using the two-lead cable (connected to a USB 1.1 port) with no problems since around the Classic's release.
0
PT·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Bellanzo, Do you use it with the Firewire hooked up as well for charging? Or does it charge directly off the USB connection? Patrick
0
La Vigna·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Ok, after Bellanzo's comment that he's tried it and it works I gave it a try. I found that the 160gb classic ipod shows that it is charging when running the usb side of the sync cord only (the firewire cord is disconnected from the power supply). This leads me to ask two more questions:
1) will the usb only configuration provide a slower charge? (if the firewire cord is plugged into the power supply, will the charge be quicker, etc)
2) can the firewire side of this sync cord also be a data lead if i plug it into a firewire port on the computer (and leave the usb side disconnected). i just assumed it was for power purposes only. i'll have to take this cord home and give it a try.
Thanks for your responses.
0
La Vigna·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Ok, after Bellanzo said his works I decided to try mine. My 160gb classic ipod works with this cord. I tried using it usb-only and the ipod shows it is charging when the firewire cord is disconnected from the power supply. This leads me to ask two more questions:
1) will the usb only configuration provide a slower charge? (if the firewire cord is plugged into the power supply, will the charge be quicker, etc)
2) can the firewire side of this sync cord also be a data lead if i plug it into a firewire port on the computer (and leave the usb side disconnected). i just assumed it was for power purposes only. i'll have to take this cord home and give it a try.
0
PT·
Imported from the Apple Support Forums via the Wayback Machine 🔗
1) Yes, the Firewire side might offer faster charging that the USB since a USB port is rated for 5V and a maximum of 0.5A which gives you 2.5Watts max power output. Where as I am pretty sure Firewire will allow much more than that (Wikipedia article claims typical devices might draw as much as 7-8Watts). However the actual charging current allowed is controlled by the iPod's charging circuitry itself so it depends on what the iPod is designed for with regards to maximum charging current. So while in theory the Firewire port CAN charge faster than a USB port, it depends if the iPod will allow the higher current draw on the Firewire port and thus faster charging, or if the charging current is limited on the Firewire port to the same rate as the USB port. 2) No, you can not sync with Firewire anymore on current iPod models. While Apple was kind enough to leave the Firewire port pins intact on the dock connector so you can still charge off Firewire chargers and Firewire ports, the data lines don't do anything since the Firewire circuitry (the FW chipset) is no longer built into iPods, so there is no longer any data transfer that way. Patrick