Hopefully one of the vpn experienced readers at the board is willing to give as a hand so we can try to find a solution.
Greetz
Mircsicz
0
sl1ce·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Hi, I'm in the same boat - I have a new Touch and trying to do the same thing - have you had any luck?
0
smanders·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Hello,
Well I tinkered with this tonight and I got something going. It does not appear that the PFsense IPsec setup supports the iPhone Cisco based IPsec client. There were some additional parameters needed that PFsense did not have a place to enter.
So I tried the PPTP and got that working just fine.
PFsense
1) VPN -> PPTP -> Configuration (tab)
2) Select Enable PPTP Server
3) Server Address - "Enter the WAN IP"
4) Remote Address Range - "Pick a range of 16 addresses that are available on your network that is also evenly divisible by 16" i.e. 192.168.1.112 or 192.168.1.128
5) I would recommend selecting the checkbox that requires 128-bit encryption
6) VPN -> PPTP -> Users (tab)
7) Click "+" to add user
8) Fill in username and password. You can leave IP blank to just take the first address in the pool of 16.
9) Firewall -> Rules -> PPTP VPN (tab)
10) Added a rule to allow all traffic to talk to everything (if you need more specifics, let me know)
iPhone/iPod Touch
1) Settings -> General -> Network -> VPN
2) Add VPN Configuration
3) Select PPTP
4) Fill in generic Description
5) Enter the IP address of your WAN interface
6) The username that was created above
7) RSA SecurID : OFF
8) Enter password created above
9) Encryption Level: Auto
10) Send All Traffic: ON
11) Save
12) Turn ON VPN
Let me know if this works for you. I was able to disable wireless, then VPN back into my home network over the 3G network and access services that are behind the PFsense firewall. I was able to web into the PFsense configuration page.
smanders
0
sammcj2000·
Imported from the Apple Support Forums via the Wayback Machine 🔗
GREAT tutorial, Why can't everyone write tutorials simply like this!
Thanks mate!
0
smanders·
Imported from the Apple Support Forums via the Wayback Machine 🔗