Imported from the Apple Support Forums via the Wayback Machine 🔗
Long story short... My 2 year old son got a hold of our 2 iphones and gave them a bath in the toilet. I was able to resuscitate them both with no damage to the 3gs phone and only a dead camera module on a the other. I'm getting ready to order a new camera module and was wondering if the 3gs module could be used on the 3g. I realize it probably won't magically enable video, but I'm thinking maybe the larger sensor might give the 3g a picture size upgrade? The connectors look the same. I'm too scared to try the 3gs's module from my other phone in case it fries it...
Imported from the Apple Support Forums via the Wayback Machine 🔗
Tempting idea, but as you said, things could go wrong and then you might need more than another module to get your phone running again. If I were you, I would order the original camera module.
In any case, Good luck.
0
BeauScott·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Both are so cheap ($5 for "oem" 3g replacement, $9 for 3gs) I might as well order both. I can't imagine the power differences would be much if at all out of whack considering the connectors are the same.
0
dieselboy·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Interesting idea, please post your experiences if you do try the 3GS camera module. But the real crux of the situation is that the software wouldn't support tap to focus etc.
0
KtCM·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I would very much like to know also. I have a 3G, but I hate the camera. I've done hardware upgrades on stuff before, but I hesitate when there's no documentation. From what I can tell though, the 3g and the 3gs both have similar camera connectors inside. The software might not let it work though.
0
kingcyprus·
Imported from the Apple Support Forums via the Wayback Machine 🔗
the 3gs camera does fit on the 3g motherboard but I did not turn on the iphone to tell you if it is functional. I do not think i will be turning it on either with the wrong hardware. That is not called an upgrade. That is 2 different units.
0
BeauScott·
Imported from the Apple Support Forums via the Wayback Machine 🔗
So I gave it a try last night. The connector does indeed fit, but the housing on the 3gs camera is square, whereas the housing on the 3g camera is circular: it won't fit into the case.
It looks like the housing is replaceable, and I've seen the parts on ebay, but I'm out of motivation to try it.