iPhone antenna
Imported from the Apple Support Forums via the Wayback Machine 🔗
I have a few questions about the iPhone antennas, which have been prompted by the experiences posted by many on this forum regarding the iPhone's variable signal reception, in the US and the UK.
To summarise my understanding, the iPhone has 3 antennas: GSM 850/900 MHz; GSM 1800/1900 MHz; and a WiFi/Bluetooth antenna. They are all positioned at the base of the iPhone, i.e. the bit covered by the black plastic cover. Also, rather than being placed close to the RFIC (as in many other mobile phones), they are connected by wires.
I am assuming that the antennas are similar to those found in other mobile phones, as I doubt Apple will have wanted to "reinvent the wheel", so to speak. I'm also assuming that they are large enough to handle these frequencies, i.e. a quarter wave aerial where the antenna length = a quarter times the wavelength. Therefore, for 850/900 MHz, wavelength = approx. 35 cm, therefore the antenna length should be approx. 8.75 cm long. Any significant decrease of this length would inevitable cause signal losses.
If the above is correct, then I'm wondering whether the fact that the iPhone antenna seems to be less sensitive than that found in other phones is simply due to the fact that the presence of the wires connecting the antennas to the RFIC is causing signal bandwidth changes and attenuation, due to impedance mismatches at both ends?
Any thoughts would be appreciated.
15 replies
Sign in or join Beachball Help to reply.
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0