Benches iPhone

15

Error 0xE8000065

apple Verified

Imported from the Apple Support Forums via the Wayback Machine 🔗

OK so I was on 2.2.1 on my iPhone with iTunes 8.1.1 and everything was ok. I updated to 8.2 and updated my iphone to 3.0. At first itunes displayed a message saying my iphone was detected but couldnt be identified properly and said to disconnect and reconnect. I did so and now it says "iTunes could not connect to this iPhone because an unknown error occurred (0xE8000065). And everytime I unplug and reconnect iTunes displays this message, and sometimes it doesnt even recognize my iPhone. My pc recognizes the iPhone as a Camera(??) but iTunes does nothing... I also pluged my 1G iPod Touch and the same message is displayed... Can someone help??

15 replies

Sign in or join Beachball Help to reply.

  1. 0

    I am Kris W

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    This has been happening to me for a few weeks. Same error. Today after it happened again, I unplugged my lightning cable from one USB port in my computer and put it in a different port.

    iTunes opened just fine and went through the backup process flawlessly.

    Can't say why this fixed it, but it did.

  2. 0

    Manonnn

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    It's kinda funny that there are many people with the same problem yet there is no awnser from apple for this problem.

    My problem started today, after a long time I turned on my iphone 5c, no problem.

    I wanted to give this one to my mom so she had a temporary phone because hers was broken.

    I wanted to reinstal it to fabric installings, the iphone turned off and turned itself on, iphone disabled.

    Had to connect it with itunes but as you can imagine it doesn't work....

    How the **** can I get my iphone back to fabric installing and get that disable **** gone??

    Thankssss.

  3. 0

    deggie

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    If you tried everything in here including a different cable, a different USB port, reloading the master USB driver (assuming it is a windows computer), and a different computer and cleaning the Lightning port then you probably do need to make a Genius Bar appointment at your nearest Apple Store. You either have a damaged Lightning port connector or a bad battery. If a long time means more than 6 months and you did not charge the battery in the 5c then it probably needs to be replaced.

  4. 0

    Matt Dady

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I have had the same error come up today and apart from me wanting to punch something. I read the "Unplug from front usb and put in rear usb" thinking ...Really????? and I don't know why but it worked. I switched phone off first (iphone7) then plugged in the rear and here we are.

    Nothing was punched

  5. 0

    SupraPR

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    wow, nobody knows how to fix this?? Not even here at apple.com??

  6. 0

    bhanu.d

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I too am facing the same problem... I updated to 8.2 and updated my iphone to 3.0. At first itunes displayed a message saying my iphone was detected but couldnt be identified properly and said to disconnect and reconnect. I did so and now it says "iTunes could not connect to this iPhone because an unknown error occurred (0xE8000065). And everytime I unplug and reconnect iTunes displays this message, and sometimes it doesnt even recognize my iPhone. My pc recognizes the iPhone as a Camera(??) but iTunes does nothing... nonetheless iTunes syncs my sons iPod....

    I have also gone and removed iTunes and then reinstalled as mentioned in the support page (
    http://www.apple.com/support/iphone/troubleshooting/itunes/#), but the problem still exists....

    PLEASE HELP

  7. 0

    oliveranthony

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I have the same issue. Also on a DELL. Since half a year I could only work around this problem with running the iphone on a motiontablet LE1700 with Windows Vista.

    On the DELL it didn't work with WinXP (0xE8000065), then I installed Windows 7 RC, the same error came up. However when having the USB connection on the front of the DELL PC, Windows 7 said that AppleServices were successfully installed but "MTP USB Device" failed to install. On a USB Hub, no errormessage came up from Windows 7, however, above error message appears when trying to restore the iPhone

    iTunes 8.2.1.6

    iPhone 3.0.1

    I bought my iPhone brand-new. always had apple products (even a macintosh portable which weighted kilo's...) but not even apple responded to this error. I would be extremely grateful if somebody can look into this. I am also willing to provide more information.

    Message was edited by: oliveranthony

    Message was edited by: oliveranthony

  8. 0

    oliveranthony

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Interestingly enough, after switching from front USB connectors to a hub, iTunes pointed out an error and showed up the iphone twice (as iPhone and <<Name>>'s iPhone. Afterwards it demands to restore the iPhone.

    I can only assume that MTP (Media Transfer Protocol) from M$ could be causing issues here. I recognized now that Windows Mediaplayer comes into NotResponding State when trying to restore the iPhone. When fiddling around with WMplayer in that very moment (= pressing play) also iTunes ceases living. (I did not reproduce this on XP though)

    Windows Media Player 12.0.7100.0

    Help is still appreciated 🙂

  9. 0

    oliveranthony

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    - Complete Reinstall of iTunes (incl. Bonjour, Apple USB Driver etc.)

    - Restore of iPhone conducted on 2nd PC (motiontablet LE1700, vista)

    - Connected over USB front connector of DELL XPS420 -> iTunes does not detect iPhone

    - Connected over USB hub on DELL (Hub is plugged in at the backside) -> iTunes detects iPhone

    -> iPhone get's recognized, did not restore from backup. Complete new config and new name for iPhone, works well

    However: After adding 1(!) music file to the newly installed iTunes and pressing "Synchronize", the following happens:

    - iTunes freezes for 3 Minutes

    - Error: Copy attempt to Volume "....'s iPhone" has failed. The attempt to establish a connection to ... has been aborted due to a timeout

    - Error: iPhone cannot be synchronized

    -> Plugging it out of the USB Hub and now back into the front connector, reproduces Error 0xE8000065

    hope this helps to pinpoint this thing a bit better?

  10. 0

    oliveranthony

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I discovered that there Windows 7 is always trying to install a "MTP USB Device". Interestingly, when I switch to a USB Hub, Windows 7 does not try to link the MTP USB Device to it. However that is only the first part.

    If Windows Media Player is present on the Computer, there seems to be a protocol clash. If I have the iPhone connected over the USB Hub and I completely remove Windows Media Player over the Systems Panel (Turn Windows features off -> Media Features UNTICKED) and restarted, it works.

    here in short:

    -Reinstall USB Apple Driver

    -Plug in iPhone, forcefully choose Apple Driver (instead of MTB USB Device)

    -Check in Control Panel if MTB USB Device is NOT present under "Portable devices" (worked on my DELL XPS420 with using an USB Hub // Otherwise Windows will keep you prompted with the MTP USB Device Driver)

    -Completely turn off Windows Media Player Features (Control Panel - Programs - Turn on and off windows features - Media features UNTICKED)

    -Restart

    -Plugin iphone

    -use iTunes

    However, the question will still be open...I don't think that de-installing Windows Media Player is a valuable option? 🙂 I guess Windows 7 struggles with the DeviceID and WMP/iTunes struggles with using MTP vs. Apple Device Driver...

    For older versions of windows I guess the three options which you have to check through (in all combinations):

    -Check with an USB Hub OR

    -Check with rear USB connectors OR

    -Check with front USB connectors OR

    AND ⚠

    -Either update Windows Media Player to 10 (11 would be better) OR

    -Completely remove Windows Media Player

    I guess people tend to disregard this problem as it needs to have an exact combination of USB Problems and WMP/Media Transfer Protocol Issues.

    I would appreciate someone from Apple Support can confirm this bug?

  11. 0

    oliveranthony

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    just wanted to add that I reproduced this on two machines running Windows 7 RC

    PC1: DELL XPS420

    PC2: DELL Dimension 5000

    could be that the USB Part of the problem is a DELL specific issue? Appreciate if any non-DELL users would step forward if they encountered the same thing and could resolve as above

  12. 0

    oliveranthony

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    now I'm completely confused... I tested with 2-4 files, it worked. If you want to synch 150 song's, you got back the initial problem. This IS a protocol issue.

  13. 0

    oliveranthony

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Finally fixed it. I don't trust DELL internal USB HUB's.

    I guess what happens is the following, the chipset of the DELL USB Hubs seems to add nonsense characters to the iPhone DeviceID (VID
    05AC&PID1292) in my case it added a 2nd Device plus "&MI_00" (VID
    05AC&PID_1292&MI00). Resulting in two devices being "connected". While this
    might be OK - I'm not a HW Person - it lead to Windows 7 believe the second is a standard MTP Device. Whilst the DeviceID has not been used for the second, I guess it run's over the deviclass (Class
    06&SubClass_01&Prot01).

    So it's trying to install it as a 2nd MTP Device which then results in the protocol clash & timeouts between Apple USB Driver and Windows trying to speak over MTP.

    In short:

    - Bought a VIA PCI USB 2.0 Host Adapter (Via Chipset)

    - Plugged my iPhone into it

    - Enjoy my music and other features.

    Maybe my journey is of help to anybody.

    I will now reinstall Windows Media Player and see if the problem is definately gone.

  14. 0

    oliveranthony

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Windows Media Player reinstalled, Synched ~800 Podcasts. Everything is fine. The alternative USB Chipset (from VIA) in the PCI USB Host Adapter did the trick. I don't know if this is only a chipset issue or Windows 7 in connection with this specific USB built-in chipset in DELL XPS420.

  15. 0

    Jason761

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Since iTunes uses the GEAR software install this and it should work fine

    http://www.gearsoftware.com/support/drivers.cfm