Benches iPhone

12

Plantronics 975 Bluetooth Headset + iPhon…

apple Verified

Imported from the Apple Support Forums via the Wayback Machine 🔗

I have two phones, one being a BB and the other an iPhone 3GS with FW3.1. I bought a Plantronics 975 Bluetooth headset. Had no problems using the multipoint pairing option to pair with both phones. Here's where the problem comes in...

When making calls with the BB + 975, it's fine. No noise.

When making calls with the iPhone + 975, it's horrid. Static, lots of noise and calls cut in and out.

Obviously, since the headset works fine with the BB (and with other phones - Motorola and Palm - I've tested on) I'm confident I can conclude it's the iPhone itself that presents the problem.

I contacted Plantronics tech support and they state:

"The iPhone is known to exhibit a higher level of acoustic distortion through BT v2.1+EDR headsets like the Discovery 975 than is experienced by users of phones from other manufacturers. Updating to Apple FW 3.0 improves the issue to some degree but does not eliminate the distortion completely."

So am I completely screwed here? Has anyone else experience similar problems? Were you able to find a solution?

BTW, my iPhone 3GS is less than a week old and working properly.

12 replies

Sign in or join Beachball Help to reply.

  1. 0

    Charly Wu

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Hi.,

    Can I check with you if you have this problem..

    I assume you have paired the iPhone 3GS to the Plantronics headset.

    First, play something on the iPod.

    Then go to the Bluetooth settings page where you can see all the paired devices.

    after that, make a connection to the headset.

    Is there any stuttering or audio breaking you hear from the headset?

    I have this problem with my iTech BluebandR headset and iSkin Cerulean RX. I only found this problem with iPhone 3GS but it worked fine with 3G.

  2. 0

    endlessct9a

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    The audio doesn't seem to play through the Plantronics 975. I don't think the iPhone does A2DP output to this headset, although the BB does. shrug

  3. 0

    Charly Wu

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Hi.

    your iPhone is 3GS, rite? when it is already connected to the headset, do you still hear the iPod music played through the iPhone speaker?

    I am able to play the audio through the headset speaker when it is already connected via Bluetooth A2DP. however, the audio is stuttering while iPhone is on the Bluetooth settings page.

  4. 0

    endlessct9a

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Yes, my iPhone is the 3Gs model. 16GB. And yes, even when the iPhone is connected to the headset, I still hear music through the phone not through the headset.

  5. 0

    Charly Wu

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Ok. then when it is connected to the headset, can you go to the iPod player, do you see a volume control or your headset at the bottom..

    is there a bluetooth icon beside the vol control? if there is, you can tap on it and route the audio to the headset.

  6. 0

    endlessct9a

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    No, there's no Bluetooth icon. But A2DP audio output isn't the issue I'm dealing with. Rather, it's the quality of sound (my end) when making phone calls using the headset.

  7. 0

    endlessct9a

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I've isolated the problem:

    * When I make a call on the iPhone when paired to both phones, the static / noise occurs

    * When I make a call on the BB Bold while paired to both phones, there is no static / noise

    * When I shut off the bluetooth connection to the BB Bold and make a call on the iPhone, there are no problems

    Seems that the 975 can't handle being connected to two phones when calling on the iPhone.

  8. 0

    endlessct9a

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Just to check, I paired my BB Bold and an old Motorola I have to the Platronics. Made calls on both, both worked fine without any static. So it seems it's not the Plantronics headset. Rather, it's the iPhone that can't handle its paired headset being paired to another handset.

    Anyone else experiencing this?

  9. 0

    smokeonthemountain

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Just picked up a 975 yesterday... Same issue... Static is terrible...

    I have been using a 925 for a good year now... Never had any issues with it as far as static... Great headset... I have been looking forward to the 975 coming out and now it turns out it will be unusable with the iphone...

    I upgraded my iphone to a 3GS two months ago... Am running 3.1 software on it... Frustrating that the iphone,.. which I do love,.. and have had nothing but iphones since initial release,.. is limiting my bluetooth preferences with this "STATIC" issue... Plantronics are top of the line headsets... I have a 510(Bluetooth 1.2) and the 925(Bluetooth 2.0)... Both are great... And as stated before,.. never any isues with either with static... Obv. apple is in need of a correction with the newer 2.1 Blutooth headsets... It did great with 2.0...

    I WANT TO BE ABLE TO USE MY PLANTRONICS 975 THO,.. COME ON APPLE...

  10. 0

    Thanar

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    The most recent software for the iPhone is 3.1.2. You should test that as well.

  11. 0

    ottonomy

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I've had my 3GS for several months now, and my Plantronics 975 for about the same period of time. During the workday, the bluetooth is paired via multipoint to both my iPhone and my Blackberry Tour. Same problem here with the sound on the iPhone. It's a quite annoying kind of static, not just a little crackle, like radio interference, as is common with bluetooth devices, but an obnoxious popping sort of sound, like tiny dropouts. The audio always sounds great on the Blackberry. It sounds ok on the iPhone until the BB is paired, but once both phones are connected, the problem persists even after the BB is disconnected again. The 975 is otherwise the best bluetooth device I've used, providing adequate volume, decent noise cancellation, and an ear fit which I could rave about.

  12. 0

    tompat2

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Hey guys, I am having the same issue with the iPhone and I am running SW version 3.1.3.

    I have tried several combinations and even paired the headset with 2 iPhones (mine and my wifes). Everything I have tried points towards the iPhone as causing the problem and being the culprit. If I try two non-iPhones, I don't have any issues. If I use 2 iPhones, the popping/static occurs on both.

    I took the liberty of calling this in to Apple support as I didnt see where either of you had previously. This is a showstopper for me as I am on the phone all day for work and receive personal calls on my iPhone.