Benches iPhone

15

iPhone Remote app hangs on Verifying Remo…

apple Verified

Imported from the Apple Support Forums via the Wayback Machine 🔗

When connecting to iTunes 7.7 Mac or PC from an iPhone 3G using the Remote app iTunes wont accept the passcode that the iPhone displays. It just hangs after entering the 4 digits, times out and request them again.

What I've found is that this seems to only happen if you access iTunes via an Apple Extreme - if I go via a non Apple WiFi access point it works fine every time. Web access etc from the iPhone via the Extreme seems fine. Both PC's are connected to the network via wired connections , one via the inbuilt (non GB) switch on the Extreme. . If I enable the inbuilt WiFi on the Mac it seems to work OK too via the adhoc. However switching back to wired it fails again , unless it's via the non Apple access point. I don't believe this is a firewall issue.

null

15 replies

Sign in or join Beachball Help to reply.

  1. 0

    jasonj75

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Had the same problem w/ an Actiontec router...Resetting the router fixed it for me. Don't know anything about the Apple Extreme, sorry.

  2. 0

    maltman

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I'm having the same problem. I can enter the passcode into itunes, but then it just hangs.

    I am also using iTunes 7.7 and an iPhone 3G. Also, my router is netgear.

  3. 0

    maltman

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    FIXED!!! - I had to manually update the firmware on my router.

  4. 0

    stintel

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I'm experiencing the same problem, but only with iTunes on Vista X64. When testing on my brother's MacBook (which is in the same local network), Remote will immediately pair with iTunes after entering the passcode. With iTunes on my Vista, I have the problem described in this topic.

    Updating the router firmware or resetting it seems a bit strange to me, as it works on the MacBook.

    What I also did is uninstalling Bonjour through Control Panel, and then reinstalled Bonjour, which I downloaded here:
    http://download.info.apple.com/MacOSX/061-3511.20070726.Q640H/Bonjour64Setup.exe. Rebooted PC, start iTunes, tried connecting Remote, same problem.

    Firewall is completely disabled, first in Windows Security Center, then stopped and disabled the entire service. I don't know what else to try ...

  5. 0

    awdemo

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I'm experiencing almost the same problem with iTunes v8.0.0.35 on Vista 64-bit.

    I'm able to start iTunes, activate Remote on my iPhone 3G, enter the code and get everything working. That's great! However, as soon as the phone sleeps I run into problems. Upon waking the phone, entering my passcode and going back to Remote (while iTunes is still playing back music) it gets stuck trying to access my music library and eventually fails.

    So, I can get everything working initially but the connection is lost after the iPhone sleeps and it can't reconnect. This consistently happens. I've gone through all of the firewall settings to no avail. Also of note is that everything worked perfectly with iTunes v7 and iPhone firmware v2.0 This problem started happening after upgrading to iTunes v8 and iPhone firmware v2.1

  6. 0

    MisterDigital

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I am running a Windows Vistab x64 system also and I am having the same problems.

    It is very hit or miss, although ususally miss... I have had it pair right away on a couple of occasions, while on others it will pait w/ itunes but the remote will never move past the key verification screen. Also whenever the ipod sleeps it un-syncs with itunes and will not reconnect. This thing is like a bee hive its so full of bugs...

    Itunes is allowed in my firewall and everything. Restarting itunes and telling it to forget all remotes and trying again sometimes works... usually not.

    HEEELLP! This is one of the main reasons i got a touch in the first place!!

  7. 0

    MisterDigital

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I am running a Windows Vistab x64 system also and I am having the same problems.

    It is very hit or miss, although ususally miss... I have had it pair right away on a couple of occasions, while on others it will pait w/ itunes but the remote will never move past the key verification screen. Also whenever the ipod sleeps it un-syncs with itunes and will not reconnect. This thing is like a bee hive its so full of bugs...

    Itunes is allowed in my firewall and everything. Restarting itunes and telling it to forget all remotes and trying again sometimes works... usually not.

    HEEELLP! This is one of the main reasons i got a touch in the first place!!

  8. 0

    paulys21

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    UPDATE THE FIRMWARE on your router!!!! i read that blog msg, updated my router firmware and POW! - itunes recognized my iphone remote instantly

  9. 0

    pellantn

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I just bought an ipod touch 2G (16GB), a new macbook 2.4 GHz 2GB DDR3 memory, and I have the latest version of iTunes 8, and my computer will let me connect and see the device but when I go to put the passcode in it takes it until it times out and asks for it again. I have a linksys router, how would I go about updating the firmware? Would that matter? It's frustrating as **** cause the remote app was a huge part of me getting the touch so I could control my library wirelessly. Can anybody help? And yes I've tried updating all my software and resetting and reloading everything.

  10. 0

    rivimont

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I am having the exact same problem. I enter in the passcode from my iPhone and it just prompts me to enter it again. Running iTunes 8.0.2.20 on Vista 64 bit with a 3G iphone with the 2.2.1 firmware update.

  11. 0

    S Guest

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I spent 2 hours trying to get this to work with Vista. I could get it to the stage of 'enter passcode' but then it would just keep asking me to re-enter passcode.

    I'm not sure exactly what worked as I rebooted after doing the following and it worked:

    Resetting router

    Ensuring media sharing was on in Control Panel/Network and Sharing Center

    Removing the remote app from the iphone and then reinstalling from the app store DIRECTLY on the iphone (I read this on another thread and I think this is what did it perhaps).

    I rebooted and it worked! I hope this helps someone.

  12. 0

    psych0sys

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I too have spent a lot of time trying to get this working and so far I've had success. I'm running iTunes 8.0.2.22 on 64-bit Windows 7 Beta Build 7000. Some of what I did was taken from another reply to this thread and I'm not sure exactly what did it, but I had tried everything I could think of. Here are the steps I took:

    * Reset router

    * Ensuring media sharing was on in Control Panel/Network and Sharing Center

    * Removing the remote app from the iphone and then reinstalling from the app store DIRECTLY on iPhone

    * Added Inbound AND Outbound firewall rules (Windows FirewallAdvanced Settings) for TCP AND UDP ports 3689 and 5353

    * Added Inbound AND Outbound firewall rules for Bonjour AND iTunes applications

    * Reboot computer

    * Launch remote app on iPhone and bring it to the 4 digit code screen

    * Launch iTunes

    So far so good. The configuration has been working since I completed all of those steps even once the iPhone has been powered off and back on. Some of those steps might not be needed but I was at a complete loss as to why iPhone Remote wouldn't work so I went overkill with the troubleshooting.

  13. 0

    Jeff Erskin Gardner

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I have a 2G iPod touch 32Gb, a new unibody Mac Book Pro and a apple airport express router. The remote app is hanging on the verifying the passcode screen. Can someone at apple please post here with some help – this is a little ridiculous.

    I have checked to make sure I have the most recent updates on all software and firmware. My router has been restarted, my MBP has been restarted, my iPod has been restarted. Anyone with any other suggestions out there??

  14. 0

    Snoop1990

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Same issue here, late 2006 MBP running 10.5.6 trying to connect an 2.2.1 iphone with the latest updates on both. But not able to get it working.

  15. 0

    ouliwei

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I had this problem for the longest time. I even installed a new router. Turns out all I needed to do was uninstall bonjour from add/remove programs in the control panel, download and reinstall it. Connected right up. To be clear. I was able to see my iPhone and iTunes could see the passcode request but it was hanging there.