Imported from the Apple Support Forums via the Wayback Machine 🔗
Keeping a connection between my headset and iPhone is an amazingly unstable experience. It will connect and then disconnect based on absolutely no rhythm or reason...regardless of distance between the two.
I've tried the following to remedy the problem and reconnect:
1. Repeatedly clicking the headset's button (and getting the single beep)
2. Turning headset completely off and on again.
3. Toggling the "Bluetooth" Preferences under iPhone's settings on and off.
4. Docking them together, then turning off and restarting the iPhone.
5. Unpairing then re-pairing the two devices.
6. Holding down the headset's button until I get the five quick beeps putting it into pairing mode.
7. Combinations of all of the above.
None of these reconnects regularly...it seems the best method is to simply leave both on and cross my fingers.
Does anyone have any other ideas? I feel like I'm going crazy because I'm sure it shouldn't be this difficult.
Imported from the Apple Support Forums via the Wayback Machine 🔗
You've tried everything I would suggest except for exchanging the unit. Even when you lose a bluetooth connection you should only have to press the button to reconnect. Once you press the button the reconnection happens in a matter of seconds. You likely have a defective unit (not entirely uncommon). If you bought it at an apple store, take it back.
0
Angel Cruz·
Imported from the Apple Support Forums via the Wayback Machine 🔗
What I finally to resort to doing was: 1) unpair; 2) hard reset (hold power button and Home button UNTIL Apple logo shows, then release) 3) re-pair.
0
TerraCruz·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I am having exactly the same problem. Its frustrating. I tried all the solutions you suggested with mixed results.
One additional piece of information. I suspect it is a problem with the Apple Bluetooth Headset. The Bluetooth hands free system in my car works perfectly every single time. It automatically detects and connects with the iPhone as soon as I start the ignition. It stays connected and functions well even on long road trips.
0
chip.r·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I can report that I'm having exactly the same problem. The headset will not stay connected and the only way I can re-establish a connection is to power-cycle the headset.
I've been looking around these forums and have not found any solutions or anything yet that helps me isolate the problem. I might try pulling out an old Plantronics headset if I can find it.