Benches iPhone

3

Four-pin pinout

apple Verified

Imported from the Apple Support Forums via the Wayback Machine 🔗

Does anyone know where to look up the pinout specs for the four-conductor iPhone headset jack?

I would expect left, right, mic and ground for the earbuds, but

(1) which pins carry which signal?

(2) What does the squeeze-switch on the earbud mic connect together?

(3) Would it be OK to Y-connect (i.e., short) left and right for a 3-conductor (audio, mic and ground) mono headset?

(4) I hear reports that people have plugged in stereo headphones after scraping off some plastic for mechanical fit. I expect their headphones would have only 3 connectors (left, right, ground) in a stereo submini (sleeve, ring, tip) configuration. How does this 3-conductor plug work in the iPhone's 4-conductor jack?

--Gil

3 replies

Sign in or join Beachball Help to reply.

  1. 0

    LarksHead

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    From my own observations, starting from the tip:

    Tip - Right

    R1 - Left

    R2 - Common

    Sleeve (outer) - Microphone

    The switch appears to short Mic to Common. Inserting a 3-pin plug into the iPhone's 4-pin receptacle would also short Mic to Common. That wouldn't hurt anything and would allow the L/R earphones to work correctly. It also Stops/Starts the iPod, just as the switch would.

    You will not get access to the Microphone without a 4-pin plug.

    I found 4-pin connectors at Arcade-Electronics.Com. The plugs still have to be trimmed to fit the iPhone receptacle. The right-angle plug cannot be trimmed sufficiently.

    Hope this helps.

    Regards,

    -Peter

  2. 0

    Gil Dawson

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Thanks, Peter. Exactly what I needed.

    --Gil

  3. 0

    Bruce.Ferjulian

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Perfect. Now all I have to do is find a part ( 3.5mm ) unsoldered plug that is a narrow form factor and I can solder to my old headset or make an adapter.

    -Bruce-