iPad camera kit error "device uses too much power"
apple Verified ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Got the camera kit....when I attach it I get an error that says the device uses too much power. I've shut down and restarted the iPad several times and still get the same error. Anyone know what I can do?
15 replies
Sign in or join Beachball Help to reply.
- 0
ComputerDen ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
A friend emailed me the following when I ran across the issue:
- It is possible that your camera has a low battery. Try charging your camera. Try it again with a full charge on the camera.
- Keep your camera connected to the charging unit while connected to the iPad.
- It may be that your camera is trying to charge from your iPad but iPad is simply not producing enough power for your camera. Check your camera menu/options. Look for charge options and disable “charge from computer” (different cameras may have different wording).
- If nothing above works, your camera may not be compatible with iOS devices or you may have defective hardware.
However, I just purchased this one and I haven't had an issue yet. I suspect that I may have purchased a knock-off previously:
iPad Camera Connection Kit
- 0
swandy ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
The USB version of the camera kit was made to connect a camera to the iPad to transfer files. I have read that some people have gotten external drives to work also, but if that is what you are trying and the external drive requires too much power - VOILA - you will get the response you are seeing.
Have not heard of any cameras being attached and getting that response. - 0
swandy ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Kickin,
Is there a setting on the camera so that the device/computer you are attaching it recognizes it as a disk drive?
I don't have any Samsung cameras, but I know that when attaching any of my Olympus camera to my Windows computer, the USB setting has to be either on AUTO or STORAGE, otherwise the computer will not recognise it as a camera. Perhaps that is what is causing the problem? - 0
Arthur Jacks ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I have a camera that uses compact flash cards therefore I have been experimenting with card readers to avoid draining the camera battery when downloading the images to the iPad.
I have been using the USB part of the camera connection kit with a multi card reader, at first I could not get anything to work, I thought ' the not enough power reason, I sorted out a powered USB hub to try, again no good, I disconnected everything and thought one last try, I put the card in the reader, connected the USB cable to the USB part of the camera connection kit and finally inserted the whole lot into the iPad, to my surprise the light on the card reader came on and a few seconds later 70 nef files were previewed on the screen.
I repeated the above several times with the same results, I then tried two other card readers again OK, but if I just removed the card and then re inserted it nothing happened, these card readers are no name supermarket specials.
I may have been lucky but I will continue to try my method and see if it holds up to regular use, so make the physical connection to the iPad the last part of the connection process, I hope this is of some help to others. - 0
BevL ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I just received my camera kit today. So far I have only tested it using the card connector. It worked great. Brought up all the pictures on my camera and was able to import them to my iPad with no problems.
- 0
Nicalaine ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
My Samsung CL65 won't work with the connector unless I take the card out of it and plug it into an adapter....Annoying to pay that much for the darn kit and still have to mess with adapters and such.
Oh--my camera is fully-charged when I try to connect it. I always get the message device uses too much power.Message was edited by: Nicalaine
- 0
Alxlr8 ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I had iOS 3.2.2 when I got my iPad, and I plugged in my USB card reader with great success, no problems at all.
Now, I've upgraded to IOS 4.2.1 and I get exactly this error.
I think apple have changed the acceptable current settings for USB connections down from whatever they were in iOS 3.2.x in order to save on battery drain, especially for use by photographers out inn the field using the iPad as a backup device.
I think Apple should allow the user to have free choice here, and set whether or not they want. The USB to be able to power unpowered devices of relatively low current drain like USB card readers, or just use a low current mode for powered USB equipment.
- 0
Rhobile ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I have just been given an iPAD (iOS 4.2)for my birthday. I love it but....
I bought a USB/SD card reader. The USB connection works fine with my camera but the SD card reader causes the error message "device uses too much power". I am amazed that they should change their software so that their own accessories don't work. I understand other pluggables have the same issue. I cannot find any solution from Apple. Have they responded to this issue? - 0
stewend ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I have had the exact same experience. After updating to current iOS the same keyboard which worked fine now gives this error message. I agree that Apple should have a hands off policy on these restrictions unless they will in fact harm the device. I am reviewing the iPad for my company and having to change my review and/or suggestions for corporate use every time there is an iOS update does not look good for a product to gain corporate support. If apple wants the iPad to remain a consumer product fine but I see so many more uses for it in the corporate world. For the record I am a long time Mac user and supporter...
- 0
R Chavez ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I also have the same problem when using the camera connection kit to transfer photos from my Mophie (battery case) enclosed iPhone. It's a bit frustrating that the provided cable by an authorized developer that carries the "Works with iPhone" logo doesn't work with the iPad. Let me be clear, my iPhone (3GS) transfers photos fine to the iPad (neat feature) when it is NOT in the Mophie battery case. At all other times when syncing with iTunes or iPhoto to my iMac the provided Mophie cable works fine. Must remember to take two cables with me when traveling. Oh well I take everything now so this isn't a big deal.
- 0
Peter7 ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Hi -- I am having the same experience that Alxir8 had. Since the iPad first came out, I have plugged a simple, non-powered compact flash reader into the iPad USB adapter. Has always worked fine, until upgrade to IOS 4.2.1 - Now I get the same "Device uses too much power" error. Unfortunate as I have found the iPad easy to bring along in my camera bag and use it to review images (This is with high end pro-camera, so much be compact flash.) Will try to plug cameras adapter kit via USB into the pro-camera and see if that will work, though this of course is not as good a solution as directly reading a card. Using the card approach allows one to keep shooting while assistant loads iPad. Or to just take the card and iPad and leave the big camera behind. Hope Apple will either fix this issue, or release a compact flash reader. - Peter
- 0
lllaass ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
One user said someone does make a battery-powered USB hub that may work. If you test with a regular plug-in powered USB port the battery-powered one should also work. I agree that this would not be the optimum solution.
- 0
mactk123 ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Just bought the camera kit, specifically to give myself a way to access files locally (not having to use an outside and limited file sharing service). Apparently, Apple's latest os reduced the power to the port from 100ma to 20ma, which not only prevents people from attaching external USB keys, but also caused most cameras (the main reason most other people bought the "camera kit") to stop connecting, giving the error.
I'll try connecting to a powered USB hub, and see what happens. Will be disappointed if Apple won't let me do this. I really am trying to use the iPad as a "post pc device" (to quote Steve Jobs directly). Kinda hard doing that without files, or being tethered to iTunes just to edit a document or access my own media.
- 0
Fred-M- ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Mactk123-
As a point of reference, I tried several cameras and all worked with the Camera Connection Kit. I tried two Sony, two Canon, a Pentax and an old Olympus. I doubt that "most cameras" draw too much current.
I also tried several card-to-USB adapters. I have five single adapters that worked OK and three universal adapters that draw too much current.
When Apple first reduced the available current there were many complaints similar to yours. In case they increased it slightly with a later iPad update, you might check to see if your iPad has the latest iOS version.
Fred
- 0
Watermonkey ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I'm running the current ios 5.0.1 and I'm getting the same error message when I plug in my Nikon coolpix s4100. I don't understand how I'm suppose to transfer photos to this thing. I'm having buyers remorse Apple...