CF Card reader with iPad
apple Verified ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Other topics suggested using a CF card reader to transfer photos from a Compact Flash Card to the iPad. I have a Dynex card reader model # DX-CR121......it will not work with the iPad as the iPad says the device requires too much power. Looks like I have to use an external card reader that does not require any power from the device it is attached to. Can anyone tell me what CF card reader will work?
15 replies
Sign in or join Beachball Help to reply.
- 0
Glorfindeal ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Just buy the Apple iPad camera connection kit.
Glor
- 0
john.grayson ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
the Apple iPad camera connection kit does not work with CF cards which is what the original poster was asking about
- 0
Glorfindeal ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Sorry, I just noticed the CF. You are probably out of luck unless you can find a cf to sd adapter and use the camera connection kit. If you have a camera that has a usb port, you can connect it to the connection kit and not worry about the card form factor.
Glor
- 0
anilsudhakaran ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Just connect your camera directly to iPad using the camera connection kit's USB adapter. I was able to transfer photos directly from my Nikon DSLR's Compact Flash card to the iPad.
- 0
Chris Hutcheson ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
That would work, but if you're in situations like I am where you have to continue shooting it wouldn't necessarily do the trick if I have to leave the camera idle for the duration of the transfer. Tethering would be an interesting, though clumsy, concept...
- 0
Merged Content 1 ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
All you need is a SD to CF adapter - the good ones (class 6 and above) aren't all that cheap, but you only need one, and then use SD cards in your camera and they'll go straight into the iPad camera adapter. Couple of SD cards, and you're always shooting.
- 0
red555 ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Or you can get a passive CF to usb adaptor/reader.
Then plug the adaptor into the CCK usb dongle. - 0
Barbara Brundage ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Watch this episode of Terry White's (adobe evangelist) blog:
http://terrywhite.com/techblog/archives/5214
He shows a couple that work, and a caveat about connecting CF readers to the camera connection kit.
- 0
Khurt Williams ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
When did it become popular to call connecting a cable from one device to another "tethering".
Tethering:
http://mobileoffice.about.com/od/phonesformobileworkers/f/what-is-tethering.htm"Tethering" is the use of your cell phone -- or other Internet-enabled mobile device -- as a modem for another device, usually a notebook or PDA. The connection is made either with a cable (USB or serial) or wirelessly through bluetooth (or, in the good old days, via infrared or IrDA).
- 0
Rudegar ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
get a powered usb hub and connect the cam to that and the usb hub to the ipad
- 0
Carlosdf ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Hi !
I have just discovered that this problem is new. I have been reading my cf cards with my card reader connected to the IPad USB camera kit connector for many months.
However since my IPad SW upgrade to v4.2 it now complains about too much power required by the device... This was not the case before.
Perhaps APPLE can comment on this change ?
Best regards
CDF
- 0
King_Penguin ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
As Apple don't monitor these user-to-user forums they won't comment here - you will need to provide feedback here
http://www.apple.com/feedback/ipad.html.As part of the 4.2 update the power that is supplied to the CCK has been reduced, probably partly to limit the battery drain from external devices that were being conected to it. As a slight aside, as far as I aware, the CCK was only ever described by Apple as being for connecting directly to a camera or iPhone, or as an SD reader - the description with mine doesn't say that it can be used with other card readers or devices
- 0
Tunesmith ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
"Tethering" is the use of your cell phone -- or other Internet-enabled mobile device -- as a modem for another device, usually a notebook or PDA. The connection is made either with a cable (USB or serial) or wirelessly through bluetooth (or, in the good old days, via infrared or IrDA).
The answer to "when did it become popular" is a number of years before the use with which you are familiar.
Take a quick look in the Aperture Forum and search "tethering." You may be surprised. 🙂
Terry
- 0
Dtonator ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
You need to add a powered USB hub between the reader and the ipad. For portability I suggest a battery powered hub, CP-H420MP. To the best of my knowledge it is the only one in existance and out of production. As of now the only internet reseller still having some in stock is http://www.sourceresearch.com. I just got one and it seems to work fine.
- 0
Jerry Pirrung ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Check this out: http://store.micgadget.com/card-readers/280-ipad-2-cf-card-camera-connection-kit .html