iPad charging issues
apple Verified ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Hello all... I am using the iPad with my MacBookPro 17 (new model) and it simply does not charge the iPad when I boot up to Win 7 in Bootcamp but does work in OSX. Therefore all the people complaining about the USB port being weak for select window computers is total BS.
Apple please release a firmware update and allow it to charge in Windows.
15 replies
Sign in or join Beachball Help to reply.
- 0
ghchinoy ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
This note http://support.apple.com/kb/HT4060 states that the USB has to be a "high-power USB 2.0 port" - maybe Bootcamp doesn't support emulating the necessary "high-power"?
- 0
fjfjfjfjfjfjdksllair ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
It's very possible that the feature listed in this article is not supported by bootcamp.
http://support.apple.com/kb/HT4049
Similar to what you said, just providing another article for reference.
- 0
LOGIKonline Inc. ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I am not changing ports on my MacBookPro, only changing the Operating System on the same computer at boot up.
Bootcamp is not emulating a port when it boots up natively and does NOT regulate the power, that is hardware controlled on the bus and I am not daisy chaining the port.
It is a firmware issue on the iPad.
- 0
LOGIKonline Inc. ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Apparently the bus is regulated by OSX, perhaps via the EFI interface to supply more power. I find it hard to believe they would do this for any other reason than to reduce the power drain. What is even more odd, Apple defaults to full power for the video card which causes all the heat issues with their MacBookPro's running Windows but elects to not give us full power USB ports.
It would be helpful if Bootcamp would allow us to select USB ports to set at full power and the Graphic card mode as well.
- 0
Racer83L ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I am having the exact same issue with my 3G iPad. It charged perfectly fine when running on OS X, but when I boot into Vista, it says "not charging".. this is an issue for me....
- 0
NovaSins ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I have this same problem and it is very annoying. I never change the usb port since its plugged into a dock on my desktop next to my monitor. Works fine in osx get the not charging in bootcamp in win 7
- 0
Tbergman ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Note that what I'm about to say is based upon my observations, not any special knowledge of the internals of the iPad.
It appears that it is the iPad itself that determines how much current it will try to draw when charging. Here's what I think happens in 3 different circumstances.
1) Plugged in to a standard USB port on a PC or MAC - Draw 500ma
2) Plugged in to a recent Mac running OSX - Draw 1.2amps
3) Plugged in to a charger - Draw up to 2 amps or whatever the charger is willing to supply.It's the iPad that determines what it's connected to based upon what signals it sees on the USB port.
There's 4th condition. Plugged into a PC running software that is designed to charge an iPad. One example of this is available from ASUS
http://event.asus.com/mb/2010/ai_charger/. With this software running, the iPad believes it's the same as #2 above and draws 1.2 amps.Running this sofware when you boot Windows might allow it to charge. I've used it on a number of PCs but not on a Mac.
- 0
a Mac user ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Newer macs can do 1100ma at 5v over the USB port. I know my Macbook Pro (late 2008) can charge my iPad just as good as the AC charger.
- 0
NovaSins ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Thank you very much
I had see other people reference the asus thing , but didn't fully understand what it had to do with the ipad , thank you for clearly explaining it
that asus program works flawlessly on my mac mini running bootcamp.
- 0
88_King ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
My ipad also only charges when connected to OSX on my macbook pro, if I connect it to Windows using either bootcamp or VM Ware, it will not charge.
And of course it will not charge when connect to PC which is annoy as I sometime forget to charge it overnight so end up with a dead ipad for the rest of the next day even when there are plenty of PC at work.
So I ended up buying an external battery which allows me to charge the ipad on the go. Plus I can also use it to charge any other devices when their batteries are low.
- 0
David_o99 ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Asus and Gigabyte have drivers for their mother boards so the iPad will charge. I have a custom built PC running Windows 7 and with the driver the iPad charges just fine connected to USB.
Without the driver the iPad will also charge as long as the screen is turned off. It will be somewhat slower, though.
- 0
MrLinguaFranca ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Hi folks,
I've noticed something peculiar, too. We've got two macs in our household, one on Snow Leopard and the other on Leopard. My iPad charges when plugged into the Snow Leopard machine, but not when connected to the mac running Leopard. I know the hardware is beefier on my Snow Leopard mac, but I don't suppose that alone explains it. One of the supposed features of Snow Leopard is its better power management.
Of course, the cynical view might be that Apple's latest swathe of mobile devices have been built to provide a richer experience and work more fully on the latest version of the OS, to further entice users to stay up-to-date.
Personally, I don't know which it is.
- 0
stingyAdmin ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
In Snow Leopard, the iPhone 4 charges and syncs without a hitch.
But when I boot into my bootcamp Windows 7 x64 installation, nothing happens. The iPhone 4 doesn't even charge.
At first I thought it was happening because iTunes was not installed on Windows, but it is still happening after installing the latest 64-bit iTunes (9.2.1.5).
- 0
lllaass ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Your iPad may actually be charging via BootCamp and USB but so slowly that when awake the in battery indictor does not indicate charging.. The windows may use the regular window power management/limit for the USB ports. Those limits are 1/2 amp compared to 2 amps for the iPad wall charger.
- 0
Yellowcoral ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I charge via a wall charger, but it takes like 6hrs to charge to 50% and it charges only when the power is off. Is my batt dying?