Benches iOS and iPadOS

15

Windows Disk Usage - First NetBios Error, Now Unknown User / Incorrect Pass

apple Verified

Imported from the Apple Support Forums via the Wayback Machine 🔗

I've been trying to set up my Time Capsule as a single wireless network provider in my apartment. I can get the internet working fine, and have turned on NetBIOS under the TCP / IP wireless options in Windows after initial errors (53) of lacking NetBIOS. However, now whenever I try to mount the time capsule disk (simply named 'Disk') from this computer, I get an "Unknown User, Incorrect Password or Login Is Disabled - Please retype the password or contact the disks administrator (1203)" error.

I've done everything I can think of to try to get this thing working on a 1TB model. The disk shows up under Airport Utility 5.3.1 as I've tried erasing and reformatting.

Does my problem have anything to do with my file sharing setting under the Disks tab, and, if so, what sort of settings should I have? Currently file sharing is enabled, secures shared disks with device password, gives guests read / write access. Sharing disks over Ethernet WAN port is disabled.

However, the setting for Windows File Sharing are blank for Workgroup and WINS server. I can't find documentation anywhere on what I should put into these spaces, and I'm not even sure they have an effect. Any help would be appreciated.

Of note, instead of assigning the IP address to my computer from the initial number (10.0.1.2), it always gives the last allowable in the series.

15 replies

Sign in or join Beachball Help to reply.

  1. 0

    Pete Marozzi

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Solved.

    Re-ran Network Setup Utility. Changed Workgroup to MSHome. Changed workgroup under Disk Sharing to MSHome. Restarted XP and Time Capsule. Shows up fine now.

  2. 0

    mtfield

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I'm having the exact same problem but cannot for the life of me figure out how to fix it... I tried to follow your same steps but i got lost with the network setup utility... are you talking about the airport program? Could u provide me with some steps to getting this working? Thanks!

  3. 0

    Pete Marozzi

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I'm assuming you are trying to do this under Windows XP. First I had to turn on NetBios to eliminate the first error.

    You do this by going to the *Control Panel* and from there selecting *Network Connections*. Pick the method you are connecting to Time Capsule - either wireless or local area. Right-click to pull up the contextual menu and select
    Properties. This will pull up a screen with a list that says "This connection uses the following items." From that list select *Internet Protocol (TCP/IP)*. Select it and click the
    Properties button. From there you will see a screen with two tabs at the top and an
    Advanced button near the button. Select it. This will pull up yet another window (don't you just love Windows) with four tabs at the top. Select the one called
    WINS. Under that tab you will see a section called "NetBIOS Setting" with three options. Make sure *Enable NetBIOS over TCP/IP* is selected.

    Now this part I am unsure about. Leave it blank, and if you still have problems perhaps try to go back and change this setting. On that same screen, I added a "WINS addresses, in order of use" setting that was equal to the IP address of Time Capsule. I don't think this is necessary, but if it doesn't work for you with the other settings, go back and try doing the same.

    Restart the computer.

    Try to connect to the Time Capsule disk. If you now get the "Unknown User....." dialog, go back to the *Control Panel* and select the *Network Setup Wizard*. From there I'm assuming you know how to go through it for your specific connection settings. If you have some sort of modem (DSL / Cable) hooked up to Time Capsule you will pick the "Residential Gateway" or "Network Hub" option, can't remember which. Anyway, the important thing is your "Workgroup". Whatever text you enter or is entered in that box, when you finish the Wizard enter the exact same text through *Airport Utility* under the
    Disks section for Time Capsule with the *File Sharing* tab selected. Put that text into the box under "These settings configure Windows File Sharing" where it says "Workgroup". For me it was
    MSHome, as that is the default. Just a note, I don't have anything in the "WINS Server" box in this same pane.

    Restart and it should work using your password.

    A few points of note: Make sure your firewall is off (not sure if this has an effect, but mine is off). Make sure the "Enable File Sharing" button is selected in the same pane under *Airport Utility*. I have "Share Secured Disks" set to "With Device Password", "Airport Disk Guest Access" turned off, and "Share disks over WAN Port" deselected as well.

    Mine is connect via wireless.

    Hope that helps. Let me know if it works or doesn't.

  4. 0

    littja2

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    You've given a great response, however I am having the exact same problem and can't follow your directions because Windows isn't the way my wireless computer is set up. Basically, I can't find an equivalent to your "workgroup" which you say is the key. Any help woudl be appreciated.

  5. 0

    Pete Marozzi

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Please explain what OS you are using and what hardware. How is your network set up? Are you using wireless or wired ethernet? Are you connected via DSL or cable or something else. I'd love to help but filling out your sig (that bottom part when you post) would really clarify and give some relevant details so I could work on your situation...

  6. 0

    littja2

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Thanks so much for your willingness to help. I have a Thinkpad R51 so the networking software that it uses is called Access Connections, I'm running version 3.7 on a machine with Windows XP pro. I tried to use Windows to manage my connections and it gave me this error message about my computer using another software to manage connections. I think error message was about the Windows Wireless Zero Configuration. I would have just uninstalled the Access Connections but the Windows message said that might cause the network card to not work properly. I am trying to set the Time Capsule up for wireless but will do wired if that would work (neither work currently). I am connected to the interenet with a cable modem. I enabled NetBIOS restarted and all that but I keep getting that annoying 1203 error message when I try to connect to the time capsule disk. The wireless connection works fine, I just can't connect to the disk.

  7. 0

    Pete Marozzi

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I too have other software to manage my connection, but if you run the *Network Setup Wizard* it only works on getting your home network running, and ignores your wireless / wired setup. The main thing is the workgroup, as that is where you are going to have trouble and why you get that error.

    Are you able to run the wizard? If not, I know the default for XP Pro is something like "Workgroup" so you could try to simply put that into the aforementioned slot in Airport Utility. Try that or "MSHome" if the wizard won't complete.

    The issue is not so much wireless or wired. What it is trying to do is automatically login to your network through SMB and then automount the Time Capsule as the "Z" drive using the "Map Network Drive" under the "Tools" menu in explorer. Without a workgroup set up and matching between your computer and Time Capsule, you will get that error (from my understanding).

    Try both of those things and let me know how it works.

  8. 0

    littja2

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Got it working. Thanks for all your help.

  9. 0

    Pete Marozzi

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Glad to hear that. How exactly did you fix it - just for others who may stumble along with the same problem.

  10. 0

    Julienleh

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Hi,

    Sorry but I get as well the same error 1203 with XP pack 2 when I want to connect to my TC. I tried everything to correct it including naming the workgroup "workgroup". And actually I see the time capsule in my workgroup, I can print but I find no way to access the HD.

    Please let me know how you solved it,

    tx,

    Julien

  11. 0

    Pete Marozzi

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Did you try running the *Network Setup Wizard*. Is your firewall on or off? Are you connected via Ethernet or Wifi? Do you have the Airport Disk Tray in your task bar? What are your settings in the Airport Utility?

    Please give some more information on what you have done to try to fix the problem and what setup you have.

  12. 0

    Julienleh

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Hi,

    OK, let's see, so the details are the following:

    The symptoms are:

    I have my TC configured from my pc as a client of my existing Wifi network. I can print from both my pc and my macbook and access the HD drive from the macbook. I see the airport disk in the task bar (on the down right side of my screen), but if I try to connect as guest or with a password it is refused with a mention to the error 1203.

    The configuration of my pc is as follow:

    xp pack 2. I am part of the "workgroup" group (as well as the TC that I can see in my neighbourhood but that I am not authorized to access),

    I have installed in the property of my wifi connection :

    TCP-IP with netbios enable

    Netbios NWlink

    AEGIS protocol

    RLAN transport

    and

    Client for netware

    Client for microsoft red

    Deterministic network enhancer

    Planificateur de QoS (in French)

    Printer and file sharing for microsoft red

    (I didn't succeed in installing ipv6)

    And I have run the network setup wizard to open my computer to file and printer sharing,

    The configuration of the time capsule is as follow:

    I can configure the tc with my pc without any issue,

    - Airport: I have not selected to publish the config in Bonjour

    and the tc is connected as a client to my wifi network via dhcp (green light)

    - Hard Drive: I activated the file sharing with the passwd of the TC with a guest access Read and write. Bonjour is not selected. The workgroup name is "workgroup" (as in my computer). I did not know what to put in WINS serveur so i left it empty. (whenever i configure account, the airport agent asking the login password but give me the same error 1203)

    Thanks for your help in advance,

    my skype is julienleh if you want, you can contact there as well.

    cheers,

    Julien

  13. 0

    Pete Marozzi

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Couple of things you can try.

    First of all, is it possible to set the Time Machine as the server for wifi rather than a client?

    Try capitalizing the name of the workgroup to match that of your PC exactly. For me it's, "MSHome".

    Also, try disabling the guest account in Time Machine.

    With guest access on, are you able to connect via Guest? Have you tried connecting without any password at all?

    Do you have your firewall on?

    In Airport Disk Preferences in the task bar, are both "Autmatically Discover Airport Disks" and "Show Airport Disks In The System Tray" checked? And, if you select the name of your disk in the box, is "Connect as User" selected?

    Let me know if any of that helps.

  14. 0

    Julienleh

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Hi,

    Tried with guest, without guest, with FW without, smae workgroup, everything is checked in the airport disk pref, i'm super puzzled by this situation...any other idea ?

    Julien

  15. 0

    Pete Marozzi

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I'm stumped. Here's what I would recommend - disconnect all other wireless routers. Have only your PC and Time Capsule connected. Follow the directions I gave earlier in the post for TCP / IP and the Network Setup Wizard (essentially the windows side) then use my exact settings (I've uploaded a copy of my Airport Configuration File) and see if that works. If it doesn't, I'm buggered for an answer.

    http://rapidshare.com/files/104703891/iCapsule.baseconfig.html

    The passwords are all "12345678"

    I'm set up for DSL, so make sure you change that information if you want to connect to the internet.