BootCamp crashes computer when partitioni…
apple Verified ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Ok. So I've tried about two times (which felt like one time too much):
I can't get BootCamp to partition my harddrive. It just crashes the whole computer (yepp, that message that "tells me to press the computers resetbutton etc" sign).
Every time I had to make BIG REPAIRS in DiskWarrior (lets hope all data on the computer is intact).
WHAT SHOULD I DO? Of course I want to be able to run BootCamp. It worked pre 10.5.2
And yes...ive repaired and optimized everything...so it has to be something else.
PLEASE HELP! =(
Regards,
Fredrik
Message was edited by: Fredrik
15 replies
Sign in or join Beachball Help to reply.
- 0
dwb ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Have you restarted the computer with the MacOS system DVD and run repairs? If so and it shows no damage, then my next thought is drive space. How much empty space do you have?
- 0
Fredrik ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Well, I ran DiskWarrior which found *a lot* of problems. Even the free space differed a lot before and after I'd used it (checking the report). I have not tried the OS X disc itself. But I also tried TechTool 4 before I ran DiskWarrior. My free space on this drive is now about 87 gb.
I'm quite shure though, that the inturrupted partitioning has made something nasty with my hdd. Not sure, but have a crash while making a partitioning could never be so good, I guess?
The OS X disk utility do not find any "windows bootcamp partition" or drive. But I've only used it from within the OS. I have also ran fcsk and made a safe boot. Not sure what it would help, but anyway..
L/Fredrik
- 0
dwb ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Before creating a partition for BootCamp, the BootCamp program will run disk diagnostics and if that passes, then BootCamp defragments the drive to create enough contiguous empty space on the drive for the new partition. Only after this is finished will the partition actually be created. I'm totally blowing smoke here, but I'm guessing that the fragmentation step is where your computer crashes.
Two things: 1) run Disk Utility by booting with your System disk and see what happens. If it finds no errors make one last attempt. 2) Failing this, back up your vital data, wipe the drive, and create the BootCamp partition before you begin installing your programs and data
- 0
Fredrik ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Well... i ran the Leopard Discs reparitool, but no problems were found in the permissions or on the disk. That this mean that there is nog strange "half-made" BootCamp partition taking space on the drive?
Regards,
Fredrik - 0
Constantin ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I have the same problem. Had to repair the HD twice from the DVD. Could it be due to using iDisk?
I have no interest in formatting my HD... Any other suggestions?
- 0
leivur7 ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I have exactly the same problem, and I have done all of the recommended tips stated above.
- 0
morpheus111889 ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I have the same problem as well. I have crashed my osx a dozen times and used my leopard install disk to repair it each one of those times and still nothing seems to work.
- 0
Workshed99 ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I have the same problem.
After I set the size of the partition to 32gigs and Boot Camp Assistant starts the partitioning process, Leopard crashes. The partition information is corrupted. I then boot from the Leopard DVD and use Disk Utility to repear the disk. I have done this 2 times now.
I have read on other forums that iDefrag can help, but I am a bit concerned.Please help.
- 0
wonderbrad ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I have been having the same problem as well. I have found that if i try to create a partition larger than 5Gb it crashes, and 5 gigs isn't much to work with! I will try the iDefrag and see if that helps me.
- 0
millsj2 ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I just had the same problem. Crashed during the partitioning stage. I now have a rogue 22gigs... really not wanting to reinstall leopard.
Does the iDisk repair fix the invisible partition?
- 0
Naqaj ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I had the same problem, with boot camp being unable to partition the drive properly. I suspect in my case there were some files on that part of the drive that couldn't be moved.
My work around was: Boot from the OSX CD, make a mac partition of about the size you want to use for Windows. That should remove any files that are on that part of the HD. Afterwards remove the additional partition, and set your first partition back to full size. Restart boot camp, try again. Good luck.
- 0
Terry Tsang ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I have the exact same problem - Leopard just kernnel panics and I have to hold down the power button etc.
Anyone have any clues as to what is going on?
- 0
Kenbrand ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I was having the same problem....used the install disk 3 times to recover the space. I read on another forum about this fix...I did this and it worked for me.
Using the install disk in disk untility mode, after fixing the disk error and recovering the space, using the disk utility on the the install disk, I created a second partition slightly larger than the one I planned on using for bootcamp, I used 11G's. Apparently, when creating this new partition the sofware, defrags or reformats the new partition space, I don't know the technical details...anyway, it creates a clean partition space. After the new partition space is created, I reversed it so to speak and expanded my original HD to the full capacity, eliminating the newly created 2nd partition.
The post I read said that this would clean up the HD so bootcamp would work when I created the new partition. It did.
I rebooted the machine, went to bootcamp and for the 4th time ran the program choosing the partition size slightly smaller than the one I created and erased earlier, 10.5G. Bada-Bing...it worked, no crash and I'm off to the races. Sorta.
After downloading Fusion, I had another problem which was solved by following the recommendations in this thread:
A new message was posted in the thread "After launching on my MacBook Air, Fusion appears on screen than immediatly closes down":http://communities.vmware.com/message/868281
Author : etung
Profile :
http://communities.vmware.com/people/etung
Message:
--------------------------------------------------------------
This is a known problem, see Fusion on a new MacBook Air and all my problems! for a workaround.
--------------------------------------------------------------Hopefully, this will work for you as well....good luck.
- 0
Fredrik ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Interesting. But I would like more information why this happens. I'm also not so happy of getting it fixed using this solution. I really want to know why this happens?
Regards,
FredrikMessage was edited by: Fredrik
- 0
JTims4 ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Ughhh... this is frustrating. It has happened to me twice so far too.