Benches Displays

14

ADC displays, 10.4.11 and MDD

apple Verified

Imported from the Apple Support Forums via the Wayback Machine 🔗

I've been running a dual 1.25 PowerMac G4 with a 23" Cinema display (ADC) for about 8 years now without a single hint of trouble. No room for the 23" ADC monitor on my desk anymore (making room for 30" w/MacPro), so I picked up a 17" ADC Studio display and wall-mounted it (actually, I have two of these).

Trouble is, my MDD G4 refuses to turn on with either 17" ADC Studio display connected. (LED only blinks once, machine never goes on.) The 23" Cinema works perfectly (as always) and a 15" ADC Studio display works, too. Both 17" ADC Studio displays work fine connected to an old G4 Cube, but both prevent my MDD from starting up. I always thought any Apple ADC display would work on the G4 MDD - no? What makes the 17" Studio displays different? Video card is the OEM ATI Radeon 9000 Pro (1 ADC, 1 DVI).

What am I missing? All four displays work, only the combination of MDD and 17" Studio display fails....?

14 replies

Sign in or join Beachball Help to reply.

  1. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Hmmm, my MDDs, worked with a 17" ADC/LCD, not much help, but...

  2. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Hi BDAqua, was hoping to hear from you!
    According to Apple, there should be no problem: <http://support.apple.com/kb/HT1825&gt;
    Only clue I have is the Cube runs 10.3.9, different video CDEV, but - so? 10.4.11 should be better. Touch switch on display? So.... why'd the 15" work? I'm stumped. Can't find any significant difference between 15, 17, 23 ADC Cinema/Studio displays.....

  3. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Hmmm, is this 17" running through an adapter of any kind, or from an actual ADC port on the card?

    Oh, have you tried a PRAM reset yet, or a Safe Boot?

  4. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    No, no adapter, straight from the ADC port on OEM video card (other port is DVI).
    Computer almost acts like it has detected a short and immediately goes off - which is what made me suspect the display's touch switch, but without it the problem remains. (10.3's display CDEV has a "disable touch switch" option that 10'4's driver does not have....)

  5. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Tried to startup from a great old SCSI drive running OS9, Monitors CDEV set to proper resolution, etc.
    Computer's power button LED only lights when pressed, nothing else happens.

    It's a hardware issue, simultaneous with two identical 17" ADC Studio Displays? I have an ADC to DVI converter, but what's the point of trying that? So..... why do they both work perfectly when plugged into a (10.3) G4 Cube?! What's the diff between G4 MDD (Radeon 9000 Pro) and G4 Cube's AGP cards (32MB VRAM 1280x1024 ATI RV200? - upgrade from OEM card)....?

  6. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I have an ADC to DVI converter, but what's the point of trying that?

    A DVI Monitor wouldn't be drawing the 25VDC from the Mac & Video card that way.

    What's the diff between G4 MDD (Radeon 9000 Pro) and G4 Cube's AGP cards (32MB VRAM 1280x1024 ATI RV200?

    Does the Cube use that extra power connector for the Video card like the 9800 Pro?

  7. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Yes, the Cube also supplies power to its ADC connector (2nd port is VGA). Never used that ADC/DVI adapter, but I presume it also has to power ADC display from its power supply.....

  8. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Well, if it's computer ADC->DVI Monitor, then the Monitor must have it's own power as the 25V on the ADC is not used.

    If it's computer DVI->ADC Monitor, then the adapter will have it's own Power Supply as DVI has no 25V line.

  9. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Well..... guess I blame the video card, but would sure like to know why....?

    Hunting for an ADC video card comparable to the Cube's, will try that in MDD next and see if that works. Unless y'all have a better idea? Stumped.

    Thanks for all suggestions/help!

  10. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    No idea if it is the Video card or the MDD's fault.

  11. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    It appears to be the touch switch on these displays; bad touch switch = no USB/no startup on MDD. The Cube apparently doesn't care since it has its own touch switch (for some reason I cannot fathom).
    At least I've whittled it down to that so far..... everything else is good. Workin' on it.
    Thanks, BD!

  12. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Great to hear, thanks for the report & good luck!

  13. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Best guess: MDD detects a problem with display's USB and refuses to boot. Longer I hold MDD's power button the farther it seems to go towards startup, but soon as I let go all stops. Need a way to disconnect USB from MDD's video card out to display..... or replace display's main board? Still guessing, as you can see. Thanks again, BD!

  14. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Great news,thanks... USB is on pins 21, 22, 23...

    http://pinouts.ru/Video/appleadcpinout.shtml