Benches Displays

13

Replaced LCD, broke display data cable?

apple Verified

Imported from the Apple Support Forums via the Wayback Machine 🔗

So, I dropped my black Macbook (A1181, 2.4GHZ C2D) and bought a replacement LTN133AT02 for it. The install went fine initially and I tested it out before screwing everything back in and it was working perfectly. Then I went to put it back together and got a bit stuck on the hinge cover, it was extremely difficult to get back in. I finally managed to get it back in but when I went to turn it on, the backlight comes on but no video data comes through, so I'm assuming I broke one of the connectors.

Has anyone had that happen to them? I ordered a replacement display data cable and I'll go through the whole process again when I get it, but if anyone has any tips or advice, it'd be much appreciated.

13 replies

Sign in or join Beachball Help to reply.

  1. 0

    Nardac

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    No video data what means ? White screen ?

    The replacement data cable is fot the Samsung LTN133.... ? For this model the cable is different from the other compatible screen for macbook ( AU , CHI MEI , LGPHILIPS ) .

  2. 0

    Glynn

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Hi, I have replaced several MB screens and I've seen this happen before. First, what instructions did you use to make the repair? I don't take the whole top assembly off. It takes me 20-30 minutes.

    I would tear it down again, check my connections and try it again before closing it up.

    If you need help with this glynnkjk (at) gmail (dot) com

    Cheers,

    Glynn

  3. 0

    JasonFear

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Hi twistb,

    The LVDS cable is pretty "beefy" so I'd check to make sure you didn't just crimp one of the cables (something that could resolved with some basic solder). As another poster stated, it's imperative that the LVDS cable you purchased is the one designed for the particular panel, otherwise it's not going to properly work.

    Also when you're reassembling the display area, make sure you don't pinch the Bluetooth antenna/cable area that sits on the right side of the hinge assembly during reassembly.

  4. 0

    Nardac

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    The LVDS cable is universal for all models except the Samsung screen, right?

  5. 0

    Nardac

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I also I have replaced many, but now I have two screens that remain white to boot.

    Do you have any experience with this?

  6. 0

    JasonFear

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Hi Nardac,

    Regrettably, I can't answer this question with absolute certainty. When I worked for Apple and ordered parts to be used in service I always supplied the serial # of the unit and the manufacturer of the panel and it auto-selected the appropriate LVDS cable for me. But I do recall there being 3-4 cable choices for the same serial number (in looking at an all parts view). Now it could be that the cable is the same, just carried a different part number. But I'm not 100% on that.

  7. 0

    Nardac

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I supposed it's only different because of the different sitesof parts they sold one cable for the samsung and one for Chi Mei, AUO, LG.

    Regard to the white screen after replacement you have experience?

    Thanks

  8. 0

    JasonFear

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Hi Nardac,

    The only time I've come across a white screen was when there was an LVDS cable that needed to be replaced. Specifically what was wrong with the cable, I'm not sure. In the capacity I performed service we were more focused on turn around time then component failure identification (that's what Apple engineering is for).

  9. 0

    Nardac

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Thanks, I had already ordered the cable, I will try to replace it.

  10. 0

    Nardac

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Sorry if I abuse of your patience JasonFear

    You can take a look here?

    http://discussions.apple.com/message.jspa?messageID=10962787#10962787

    Ty

  11. 0

    Nardac

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Update.

    I mounted a AUO in a macbook mid 2009 originally with a LG screen and the result was a white screen.

    The same AUO work great with my macbook late 2007 originally with a LG and not work with another macbook originally with a CHI MEI screen .

    In the macbook mid 2009 i mounted another LG and work .

    Now i'm a little confused with the compatibility of LVDS cable .

    Someone can clear my head?

  12. 0

    EthanKoehler

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    hey, i am working on a white 13.3" 1.83 Ghz Core Duo macbook model A1181, originally had a chi mei panel. I replaced it with a lg. My backlight does work, brightness control does work, but no video. I have reset the pram etc with no avail.

    I'm seeing people say the ldvs cable should be ok with a chi mei or a lg, but as I am not getting a white screen like you all, any suggestions or better advice/guide lines you can give me? I'm not sure if returning this panel will be better for me, or if i should look for a certain lg ldvs cable. The screen was 60 dollars free shipping and I'm not sure how to go about diagnosing or identifying the ldvs as to buy a better one in my situation.

  13. 0

    rkmag

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I dropped my MacBook also and the screen is shot. I am using a external monitor now but I want to make it my default monitor or at least be able to get it to display at proper resolution.

    I am using my HDTV as the external monitor with resolution set to the TV's which is 1080p. My MacBook is set to 1280x800. This makes the picture a little blurry.

    For a while it was at 1080p but then went back. I don't know what if anything I did to cause this but It would be nice to be able to set external monitor as the default monitor.