Benches Displays

11

Apple LC475: Connecting a PC monitor?

apple Verified

Imported from the Apple Support Forums via the Wayback Machine 🔗

Hi

Back in 1993, I bought my first Apple - a desktop LC475 (Performa xxx) with an Apple display. It was retired in the late 90s but I kept it for old times sake.

I switched it on yesterday for the first time in 10 years maybe and it seemed to boot up just fine - familar welcome note sounding - but the monitor remained black despite the power light glowing green.

I'm now not sure: is the computer itself ok? Is the monitor broken? I've got a PC monitor in the house (15in VGA flatscreen) and want to know how I connect it up. Research suggests the video out on the LC475 is DB15 if that makes sense.

Anyone got any ideas?

11 replies

Sign in or join Beachball Help to reply.

  1. 0

    Jan Hedlund

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Hi,

    Before you try anything else, do check the (3.6 V) battery voltage. A bad internal battery
    can cause no video.

    If you wish to connect a PC monitor, a special Mac-to-VGA adapter (typically, with switches) will be needed. See also
    KB article TA21581.

    Jan

  2. 0

    Jonathan Phillips1

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    hi -- battery replaced and I now have video output, but I'm getting the floppy disk with question mark, which I presume means missing, corrupted system boot.

    I've reset the PRAM (Cmd, Opt, P R) but that doesn't clear it.

    Any other immediate steps?

  3. 0

    Grant Bennet-Alder

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Once you have replaced the battery, your Mac can remember important Parameters. But what it remembers may be garbage.

    Reset the PRAM before you decide your Hard Drive has a problem. It may simply have forgotten the location of the System files.

  4. 0

    Jonathan Phillips1

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I've tried reseting the PRAM but still getting the floppy disk question mark

  5. 0

    Grant Bennet-Alder

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    If you have a Disk Tools floppy or an appropriate System/Install CD, you can use it to do several more things to make booting more likely:

    • Run Drive Setup or HD SC Setup and check that your drive is present and has a reasonable capacity (not zero). Use the non-destructive "Update Driver" function. Do not initialize -- you will lose everything if you do.

    • Use the Startup Disk Control Panel to set your Hard Drive as the Startup Disk.

  6. 0

    Jonathan Phillips1

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    sadly, no system 7 disks to hand. I've seen websites to download and create your own, but I don't have a floppy drive anymore!

  7. 0

    Jan Hedlund

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    A bootable floppy can be made from the downloadable Network Access Disk 7.5 (
    here). Normally, a semi-old Mac with a floppy drive is used to create a properly sector-copied disk.

    If absolutely necessary, it is possible to create this very floppy on a PC. This requires a special technique. Please post back if of interest.

    Jan

  8. 0

    Jonathan Phillips1

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    thanks Jan -- the problem now is that I don't have a Mac with a floppy drive (save for the LC475) that I'm trying to fix.

    For 99p, I'm winning a new hard drive with system 7 installed. I hope that'll fix matters.

  9. 0

    Jan Hedlund

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Hello,

    a new hard drive with system 7 installed. I hope that'll fix matters.

    According to the technical specifications, the
    LC 475 needs at least System 7.1 and a System Enabler 065 (the specifications for the
    Performa 475 list System 7.1P3 and System Enabler 364). No need for system enablers with the newer operating systems mentioned.

    I don't have a Mac with a floppy drive

    If you have (or could borrow) a Windows PC (with a floppy drive), it can be used for the Network Access Disk 7.5 download, but would require (Aladdin) StuffIt Expander for Windows and a suitable PC disk image utility.

    Normally, never decode or decompress Mac program files on a PC. Always keep MacBinary (.bin) or BinHex (.hqx) unaltered until on a Macintosh computer.

    BTW, a full System 7.5.3 is available for download from Apple (e.g.,
    British and
    North American versions). The downloadable System 7.5.3 files are small enough to be transferred on 1.44 MB diskettes (in this case, a plain copying process; no separate disk image program needed). A startup floppy file is not included (use the Network Access Disk 7.5 whenever necessary).

    Jan

  10. 0

    Jonathan Phillips1

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    the drive in auction has system 7.5 (I should have said 7.x, my mistake) so is the right OS for the 475.

    Amazing that full system 7.5 is available from Apple -- I'll be looking that way if needs be. Thanks too for the pointer about Windows PC -- I'm sure someone local has one of those with a floppy drive so I remain hopeful.

    ... turned into quite a project 😉

  11. 0

    Jonathan Phillips1

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    All fixed. Oddly, LC475 is now in B&W whereas I recall it was a full colour OS. Working never-the-less