Imported from the Apple Support Forums via the Wayback Machine 🔗
Hi all,
I have a mid-2007 20" iMac. Recently I decided to recycle a 17" LG monitor as a second monitor for my Mac, so I went and bought a mini-DVI to VGA adapter. The external screen was recognized as soon as it was plugged in, and now I enjoy an extended desktop.
Problem is, I noticed that when the Mac's main screen goes to sleep, the external monitor displays "NO SIGNAL" just as if it the video cable was disconnected. It looks like it doesn't get the right signal to tell it to go to sleep mode. The monitor is not very old, it's a flat panel LG Flatron L1715S, and I'm affirmative that it did go to sleep mode when connected to a PC.
Did anybody else experience the same problem? is there a fix?
Imported from the Apple Support Forums via the Wayback Machine 🔗
I don't think there is a +sleep signal+, but rather, it is a lack of a video signal that makes the display go to sleep.
My VGA-connected display will show "no signal" for about 5 seconds, then go into its own sleep mode. My iMac did not send any "signal" to the display to show "no signal" for a few second and then go to sleep mode; the display did that by itself.
I would first check the on-screen menu for the display to see if there is some setting that makes it go into sleep mode when there is no signal. Since it is displaying "no signal," it is obviously acknowledging that there is +no signal+.
0
Apple Support Community member·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I'm pretty sure there is a "VGA sleep signal", but anyway when there is no signal obviously the monitor should go to sleep by itself after a few minutes, but if I leave it on it still displays the "NO SIGNAL" in the morning.
Nothing about that in the OSD menu, I tried a factory reset, no change..
0
Apple Support Community member·
Imported from the Apple Support Forums via the Wayback Machine 🔗
If you disconnect the display from the iMac while it is ON, does it then go to sleep? Even my ancient CRT VGA display from the 1990's will power down to sleep mode when not connected to anything. If it does not, that would rule out the iMac doing something to keep it from sleeping. If the display still does not go to sleep when it is completely disconnected from any input, I think there is a fault in the display.
0
Apple Support Community member·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Apparently it does not go to sleep even when it is actually disconnected from the Mac... So you're right, it's a monitor problem not a mac problem. Thanks for helping me sort this out.