monitor new---no signal after 2 days
apple Verified ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
tonight I was working just fine then when I rebooted to ensure some prefs were not still taking hold it gave me the "no signal" error then goes to sleep.
monitor: hp 2009m
it states that I should check the video cable but I don't know where that is. Is it the cable that goes from the back of the comp to the electricity?
the computer powers on but without the monitor it does me no good...i am using my laptop to come here for help.
any ideas where it is located?
all the cables from the monitor to the computer are connected firmly and I disconnected them and reconnected and still no monitor.
14 replies
Sign in or join Beachball Help to reply.
- 0
Apple Support Community member ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
The video connection refers to the cable between the monitor and computer, connected to the graphics card on the rear. Do you frequently unplug or turn OFF the power strip to the computer when not in use or to avoid storm damage? If so, the computer's internal 3.6-volt, ½AA lithium battery may be very weak or dead. A dead battery can cause video problems with certain Macs, so if it hasn't been replaced since the computer was new, I'd suggest that you buy/install a new one. It's located in a plastic holder on the motherboard. You can undoubtedly find a replacement at battery specialty retailers in your area or from a number of online dealers, like this one. Radio Shack has a compatible replacement, but they charge more than three times as much for it. You could have a problem with the graphics card, but I'd try the battery before worrying about that possibility.
- 0
Apple Support Community member ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
thanks Jeff, it never occured to me the battery may be the culprit...I do know the poor baby is ten years old and many things are still factory installed.
I did replace the battery but that was over 3-4 years ago sooooo I will give that a try tomorrow...maybe that is why at startup or reboot there is no sound...my bong is kaput at times...lol
if not then I will have to replace the vid card which I feel really idiotic about....when they said video card it never occured to me they meant the graphics card...here i was thinking video as in camcorder type of video...not my original graphics ATI...lol
- 0
Apple Support Community member ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Hi, you might want to check and see if you have accidentally switched your source settings since your monitor can accept two imputs. VGA and DVI. There will be a button on the front that may be marked 'source'. Try pushing this once when you get the no signal error and see if that fixes it.
Kevin
- 0
Apple Support Community member ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
yes, it is both but unfortunately they both say no signal and go no further...lol
trust me it has been one thing after another since the first of the year from external hd dying and taking EVERYTHING with it, mice, keyboard, burner and usb port hub (my big one at that ) leaving me with only a 4 porter...I am going bald from yanking it out...lol
- 0
Apple Support Community member ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
wel I am back, got the new battery $20.00, wow so that shouldn't need replaced for quite some time...lol
Unfortunately...it did not help. I installed the battery, pressed the cuda button, shut the door, turned it on and the time was not needing changed at all. I also tried to reset the pram with the keyboard keys but it only started up the one time and did not do anymore restarts.
I still get the error message about no vid source and it is going to sleep....the lcd anyhoo
I borrowed a crt and it works! So now i am really confused.
I have ordered anothe ATI RAGE 128 card to replace it , in case it is going south and hope beyond hope it is not the mobo.
Does anyone know anything about poweron.com, reputable?? trustworthy?? they have a very nice g4 that is priced very well for in case my smurf dies suddenly.
oh which was better g4 agp or the g4 pci and do they use the same ram as the G3?
I have no idea what is the problem now since the crt works and the lcd doesn't.
any more ideas??
- 0
Apple Support Community member ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Some LCD monitors will not display a picture unless the screen resolution is set to EXACTLY the optimum resolution for that display.
As an experiment, you may be able to set the CRT resolution to the LCD's "Best" resolution, then swap the cables "live" (without doing a restart). With luck, the picture would appear on the LCD.
- 0
Apple Support Community member ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
"I have ordered another ATI RAGE 128 card to replace it."
If you want to replace the graphics card, I would suggest buying something that's technology-forward, like the ATI Radeon 9200 or at the very least, the Radeon 7000 Mac Edition. These cards have DDR memory, compared to the SDRAM found on the Rage 128 series and older cards. A current graphics card would support the resolutions that are commonplace with modern widescreen displays. Incidentally, did you order a PCI graphics card and not the AGP version of the ATI Rage 128? Today, you should pay no more than $10-$15 for that 10 year-old graphics card.
- 0
Apple Support Community member ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I feel so stupid at times...panic is such a rush at times...lol
ok about the monitor...I did try the crt and it worked so then I tried my daughters Dell monitor and voila...I have a working monitor that states the res is 1280x1024...lol the new one which orks really well with her dell is 1600x...that is when it hit me about the res size...lol
when she booted up it came up saying the recommended size is 1600x which it never said that on my g3...so now I have a monitor that hopefully will behave now.
The vid card: yes it is a pci being ordered and we did not go for the raedon 9200 cause it said it was for the g4/g5 so I opted for the same size it came with, for just in case...guess I was trying to be too safe. I would have loved the 9200 for more power...lol He said it would be about 45.00 I assumed it was with his markup and shipping since he is ordering it.
any input on powermac.com--- reputable???
- 0
Apple Support Community member ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
"He said it would be about 45.00. I assumed it was with his markup and shipping since he is ordering it."
The market value of a B&W G3 is about $45, so spending that amount for a graphics card that's worth $10 (at most) is excessive. I think the merchant sensed your lack of expertise and decided to gouge you. In the first place, the Rage 128 has been discontinued for almost 10 years now, so there's no "ordering it" anymore. More likely, he's browsing eBay to find a used/pulled one for next-to-nothing. Even if he were buying it from a supplier with new "old stock," it's still overpriced at $45. If he were really interested in helping you and were familiar with the B&W G3's capabilities, he would have suggested that you graduate to the next generation of ATI's PCI graphics cards for Macs - the Radeon Mac Edition or Radeon 7000 Mac Edition. Both of these cards are also discontinued, but you could check eBay's listings for a used one. As for poweron.com, if you're buying this $45 card from them, I've given you my opinion. If possible, I'd cancel the "order" and invest your $$ in a better card for less.
- 0
Apple Support Community member ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
LOL...well thanks for the info ---I now do not feel bad about canceling the order on him.
No this person that is ordering the card is from here in town. I was wondering if anyone had info about poweron.com because they have a g4 that is 99.00, they ahve g3's at 69.99 and the g4 agp and the one pci for 99.00 along with a few g5's that are considerably more
did not know if they were reputable or if anyone had experience ordering with them...I am starting to get leary about them since I sent them an email via their site to ask them questios and have no reply...course that was Wed. or Thurs. night and they might not work weekends so will anxiously await to see if I hear from them.
There is o way I can afford one of the newer Apples at all so this would be perfect if I find out more about the company and how their stuff is.
Thanks again.
- 0
Apple Support Community member ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
In that case, I have no experience with poweron.com. As for buying a used G4, you're probably aware that resellers of secondhand computers typically buy them in large lots at auction. If you ever saw a pallet of them stacked on their sides (sometimes 5 or 6 high), you'd probably never want to buy the one that was on the bottom. With metal-cased PCs, cosmetic damage is probably not as bad as with the plastic side-paneled G3s and G4s. Scratches on the ice-colored panels of a B&W G3 are noticeable, but not as glaring as ones on the crystal-clear side panels of a G4. If you're not particular about appearance, buying an affordable secondhand Mac from an online merchant is probably the way to go. Many used-computer dealers state something like "has the normal amount of scratches from everyday use." Excluding laptops that get toted around all of the time, most individuals don't scratch their computers in normal usage. The cosmetic damage seen on used computer exteriors was typically caused from rough handling, by the companies that reclaimed them from corporate use. If there are any dealers in your area that sell used Macs, you might want to check them out. If that's not an option for you, I'd press the web merchant for an accurate description of the overall condition of the unit that you'd be buying. If he's reluctant or gives a vague appraisal, consider yourself warned.
- 0
Apple Support Community member ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Thank you Jeff, that is why I have not just jumped in and ordered it yet...I feel strange...one with the price and also not hearing from them.
Although they claime to advertise in Macaddict magazine (which is now MacLife) one would think they would need to keep their reps in check...doesn't necessarily mean they do.
The price is great but then of course what if I get it and it doesn't worl right, their terms of use type of document doesn't really state it clearly...something about the maker being responsible and we all know that Apple no longer has those under warranty...lol
Again thanks, I am happy knowing the monitor is working and finding out why it did not....as well as knowing I can use the 9200 card if I should need one.
- 0
Apple Support Community member ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
The computers that they sell probably work as indicated upon arrival, but if you were to run into a problem, the cost of return shipping may be your responsibility. When selling used computers, the dealer often has a general idea as to how much usage they previously had. Without a crystal ball, he really can't quantify or guarantee the amount of remaining service life a unit might have. That's the biggest gamble for the buyer, when purchasing an old computer from an out-of-town merchant. Money spent on multiple shipping expenses could just as easily have been applied toward a similar unit with a higher price tag, bought from a local merchant.
- 0
Apple Support Community member ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
yup you are so right...and being jobless again doesn't help so ca't get a new one...believe me I droll over the newest models that use both windows and mac OS. **cleans drool from mouth**
lol
trust is a big thing and the longer they take the less I want their merchandise..but as I said I am happy now with monitor working and knowing I can surely use the newer vid card too.
thanks for all the advice...very appreciated
and guess what....the main trouble i have had with coming here was not being able to log ing---then not staying logged in and today it works!