Benches Deployment and MDM

5

Disk Problem on Intel server

apple Verified

Imported from the Apple Support Forums via the Wayback Machine 🔗

I have a strange problem with my one of my servers. I have three bays loaded (1TB, !TB and 750G). I can only boot from one of the disks - irrespective of which bay I put it into. I can load an OS onto the other drives without any errors and I can store data on the other drives, but I cannot boot from them. I ideas anyone? I don't have the hardware diagnostic disk that came with the server.

5 replies

Sign in or join Beachball Help to reply.

  1. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Several questions come to mind here.

    1) How are you installing the OS on these additional disks? Via the DVD installer? or by cloning the existing boot volume?

    2) How are you trying to boot from these disks? VIa System Preferences -> Startup Disk? Via front-panel LEDs? Other?

    3) Is the enclosure locked?

    These are important because:

    1) The Intel XServe will only boot from a GUID-partitioned drive. If you use the Installer DVD to install the OS, it will check the drive partition table before installing, to ensure the result will be bootable, but a clone won't make the same validation
    2) System Preferences will only offer valid boot drives, so if the drive don't appear there, the OS doesn't think they're bootable.
    3) If the enclosure is locked the OS won't boot from any volume other than the one selected in System Preferences.

  2. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Hi Camelot

    Thanks for the reply. I'm totally foxed by this one.

    1) Have tried installing from DVD and via cloning existing boot-able volume using 10.5. Have tried formatting in prior to installing, also tried setting to all zeros first (that is how desperate I'm getting with this). Can confirm that drives are set to GUID.

    2) Tried to set volume using system pref on booted volume and from DVD. It will never boot from selected device (on other disk) and always resort to last boot volume. If you go back into start-up volume from finder it still shows the volume you wanted to boot from.

    If you select the volume at systems startup time the volume(s) on the disks I cannot boot from do not show up. So clearly a startup manager issue.

    3) Enclosure is not locked.

  3. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I found some more info. This server has never been used as a production server. It is more of a test/dev rendering rig and has been round the block a few times - but never given any problems until now.

    I notice that two of the drives are Seagate ST31000340AS, with the known buggy firmware. One of these two drives are one that it will not boot from. (Model: ST31000340AS Revision: SD15) I cannot load the new firmware from an xserve, so i'll have to find a pro rig or PC, update the drivers on that.

    The other drive that it will not boot from is a Hitachi HDS721075KLA330 Revision: GK8OA70M, which for some reason I think is a genuine apple product (but there is no logo on the case, so i'm not sure.

  4. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    All of those drives, the Hitachi and the two Seagates, that you have are desktop class drives -not to mention the fact that they are bulk OEM part numbers. They really aren't designed for server use. Reasonably priced enterprise class server drives are available from Western Digital in their RE3 or RE4 class drives.

  5. 0

    Apple Support Community member

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Going to close this one down as it seems clear that there is a problem with the drive firmware and EFI. Cannot load the new firmware onto the disks as xserve restricts you from booting another OS.