How to test your iSight
Imported from the Apple Support Forums via the Wayback Machine 🔗
This is 1 of 9 items I suggest be posted in a NEW iSight FAQ folder when finalized.
b How to test your iSight to ensure it is working
The very best way to assure your iSight works is to ask the retailer to demonstrate
b the one you will take home
for you in the store. Then you KNOW it works.
If you do not buy your iSight in person, just read and follow its instructions on how to plug it in and see if it works. If you are encounter difficulty, here are a few tips that may help.
As an Apple designed and integrated part of your Mac, iSight is basically a plug and play device. Most of your questions or issues will be related to the software that you use to operate your iSight rather than to the iSight itself.
However, there are a few things that occasionally cause difficulty for the new user.
b First, Plug it in.
You must use the correct Firewire cable, and plug the cable into one of your Mac's Firewire ports. Use the Apple cable that came with your iSight to test it.
If you are using a Firewire hub, are chaining Firewire devices, or have other Firewire devices connected to your Mac, and if you are having trouble, try is removing all additional devices and plugging iSight directly into one of your Mac's Firewre ports until you KNOW your iSight works.
(After you get iSight working, you can then add the additional devices back one at a time to find whether you may have hardware or software conflicts from third party Firewire items. Such conflicts are rare, but they are possible. If you find one, ensure you have the latest available drivers for the offending item, and try again if you updated the software. This sometimes cures conflicts.)
b Next, Turn it on.
If you "forgot" to read the instructions or perhaps found something confusing in them, the iSight may not be turned "On." To check, look directly into the front of the iSight lens. If you see a large white dot in the center of the lens, re-read the instructions and rotate the front of the iSight until the white dot is gone. That will turn the iSight to its "On" position.
If you are notified that there is later Firmware available for your iSight, do the update as follows. Use your Mac's Disk Utility application to repair permissions on your hard disk. Then run the firmware Updater. Finally, use Disk Utility to repair permissions again. (It is recommended that you use your Disk Utility application to repair permissions on your hard disk b BEFORE and AFTER
all software updates, not just iSight's.)
b Then, Try it.
iSight should show you a preview in whichever application you intend to use it with. If it doesn't, try a different applications to drive iSight. Two commonly used apps are iChat AV and iMovie.
If you use iChat AV to test, plug in your iSight and select iSight > Preferences... > Video to see the view from your iSight.
if you test with iMovie, be sure to set the small slider below the video view window to the "camera" icon position rather than to the "scissors" editing position to see the view from your iSight.
If either of these applications shows you a picture from your iSight, you know your iSight is working.
If it is not, check out Apple's Tech Support Article entitled iSight: How to Troubleshoot.
14 replies
Sign in or join Beachball Help to reply.
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0