Mystery Problem - MDD G4 dual 1.25
Imported from the Apple Support Forums via the Wayback Machine 🔗
Hi all,
First post from a newbie to the list. Bringing this tricky one to the brain trust in hopes of a solution.
I've got a MDD dual 1.25 gHz Power Mac, 2 GB RAM, OS 10.4.10 that's gone "funny." Symptoms are frequent program crashes (Safari, Disk Utility, Mail - you name it) and regular System Failure freezes, sometimes on boot - just like bad memory.
The messages I receive display as black text on white overlay and don't look like Kernel Panics, excerpted as follows:
system failure: cpu=1;
code 00000008 (unaligned stack)
latest crash info cpu 1:
exception state (sv=0x4FACC80)
pc=0x000ABA08;
msr=0x00001030;
dar=0x0000002E;
dsisr=0x40000000;
lr=0x000ABBCC;
r1=0x2C4EBC38;
xcp=0x00000098 (system failure)
backtrace: backtrace terminated - unaligned frame address; 0x2c4EBC38
proceeding back via exception chain:
exception state (sv=0x41FACC80) ... and more I didn't log.
Running internal Disk Utility I have received: "Disk Utility Internal Error - lost connection with Disk Management Tools and cannot continue."
I have gone through all RAM sticks one at a time, an in each of the 4 slots in turn. When I run REMBER, all memory sticks (4 x 512 Kingston DIMM's and original 256 Apple RAM) fail consistently. But ... all these DIMM's pass REMBER without fault when tested in other machines.
I have reset PRAM, NVRAM and PMU, replaced CMOS battery, run Disk Repair and Repair Permissions utility from Tiger Install DVD and disconnected all peripherals, including PCI cards, internal DVD drive, internal hard drives, FW drives.
I have swapped out the video card and logic board with no change and have tried running with the case's access door open and blasted it with an external fan to increase cooling.
A local PC tech pushed the CPU with some serious fractal tests for 16 hours straight with no errors. His Ubuntu LiveCD 6.1 tests indicated that the computer is only accessing the 4x video card (both the original and a replacement) at 1x, though I don't know if this is relevant.
When I attempt a clean install of Tiger on a fresh drive (either from internal DVD or external FW DVD) it predictably fails during the final language installation section.
Interestingly, when I run Apple Hardware Test (Extended Mode), all components pass, including logic board and all memory. I can also boot my G5 and my G4 iBook from the faulty machine's drive and run without incident.
I got this machine new but quite late (in February of 2005) from Mac Resource out of Texas. Other than the current mystery problem, it has run flawlessly and has never been subjected to excessive dirt, moisture, temperature or physical shock.
I'm stumped. The only component I have not yet tested or swapped out is the PSU. I imagine that it could be the culprit. If so, what's the best way to test it? There are no anomalies other than those that appear to be memory related. Display is stable, red light on logic board glows a steady red, etc.
All your suggestions are most welcome and I thank you in advance.
T
9 replies
Sign in or join Beachball Help to reply.
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0