Imported from the Apple Support Forums via the Wayback Machine 🔗
Hi there, I am hoping you guys will be able to help, so far I have tried everything and nothing seems to have helped. We have a new Mac Pro 8 Core with 16gbs of ram. We have also upgraded, so the main hard drive is a 300gb velociraptor drive, and 2 scratch disks which are 150gb velociraptor drives. Then we have the file storage drive which is the 1tb hard drive that came with the system.
Basically we brought this system as we are starting a small video production company, however final cut pro is causing us real problems. Whenever we start the program we get the beachball and then it will eventually start, and it will seem to run ok for a few minutes, but whenever we have a transition, or audio with no video clip the program crashes. We have already compressed the raw video clips so that shouldn't be the problem, I am at a complete loss of what to do!?
Imported from the Apple Support Forums via the Wayback Machine 🔗
a few questions,
what version of FCP? what format are you working with? are the media files on the 1tb drive and if so how is it connected? whats on the 2 scratch discs? the main hard drive is your system drive and this is where FCP is installed correct?
let us know
Andy
0
David S.·
Imported from the Apple Support Forums via the Wayback Machine 🔗
When you purchased the machine, did it have Snow Leopard installed?
And if so, did you do a clean install of FCS3 following the purchase?
0
the_random·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Hi, we are using 7.02. The system files are are kept on the 300gb Main HD. All of the media files are on the 1tb hard drive. They are taken on a Canon 7D, and compressed to 422LT. All of the drives are internal so far. The scratch disks are empty, with the exception of the final cut scratch files.
Also yes it came with Snow Leopard (the machine was brought in December) and we installed the latest version on FCS.
Thanks!
0
andy chastney·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Ok
so your FCP sequence settings match your source media settings yes?
First off trash FCP preferences (lots of ways to do this - but get hold of FCS maintenance pack from digital rebellion, it'll serve you well) run disk permission repair also. and check your drives aren't falling asleep in energy save system preferences.
see how you get on.
0
the_random·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Yes, well at least I think they match, how can I check this? We have literally just tried this, and downloaded from Digital Rebellion. It didn't seem to do anything, we went through all the program stages, and it did nothing! We also just did a disk permissions repair, and there was a lot that needed to be repaired, but it did it no problem, still the same problem. Also tried the 'falling asleep' and it switched that off.
Still no dice!
0
David S.·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Are you using the EOS plug in to transfer with?
0
the_random·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Nope, we have a card reader so we are transferring the files across, then we use MPEG Streamclip to compress the video to ProRes 422LT, then we delete the original files. Sometimes it seems to be running ok, but most of the time it is so bad it is unusable!
0
David S.·
Imported from the Apple Support Forums via the Wayback Machine 🔗
With that machine, why not download the EOS plug in from Canon, and you'll have better control and transfers should be faster.
0
the_random·
Imported from the Apple Support Forums via the Wayback Machine 🔗
We tried that at the beginning, but it was a lot slower than the transfer from the card reader. Also the transferring isn't an issue as all the files are ok, its when we come to editing them that the problem comes!
0
andy chastney·
Imported from the Apple Support Forums via the Wayback Machine 🔗
sequence should be 1080 25 apple pre res 422 LT in audio/video settings if your source stuff was ingested to 108025 pro res 422LT.
right click on a clip go down to item properties and look.
were all those drives formatted by you as mac os extended by the way? check in disc utilities.
0
the_random·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Yep they are the sequence settings we have got! Also whenever we use an audio track we compress that to aiff as we got told that mp3 could be the problem - it clearly wasn't! Yea, they are all mac os extended!
0
andy chastney·
Imported from the Apple Support Forums via the Wayback Machine 🔗
the audio is at 48khz correct? have you got little red bars in your timeline indicating unrendered? try rendering all if you have.
0
the_random·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Everything is rendered, that is when we can get it to open it is rendered! and yea the audio is at 48khz. It seems strange because with such a powerful machine it should be running it a breeze....especially with the 2 extra scratch disks thrown at it! Occasionally we will get an I/O error, I don't know if that helps at all?
0
andy chastney·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Just to add on.
I use 7D stuff a fair amount and this is what I do, hasn't let me down yet.
Transfer all contents of card to a folder with todays date on drive (a for example).eject card.
in fcp create a bin (eg 7D prores -todays date), set this as logging bin
open log & transfer, navigate to the folder, log as you wish, select codec in L&T prefs (for me Prores HQ, but LT is cool if youre happy with it)
add to queue and leave to transcode.
you need the eos plug in from canon, but I have found this much quicker than anything else. so I'm surprised you found it slower.
0
the_random·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Ok, but this still doesn't solve the problem of final cut locking up on opening...or during playback. I will try as you suggest and see if it solves the problem, but this will only effect import surely not final cut itself?