Benches Apps and software

6

Camcorder Panasonic PV-GS300: "Communicat…

apple Verified

Imported from the Apple Support Forums via the Wayback Machine 🔗

I have a Panasonic PV-GS300 camcorder, which I have connected to my iMac through a Firewire 4/9pin, but all I get when opening iMovie is "Communication Error" on a blue screen. I believe the Mac does not recognize the camera and I can not import the video images.

Any advice? Do I need a special driver to be able to use my camcorder for my mac and if so where can I download it?

New Mac user here.

6 replies

Sign in or join Beachball Help to reply.

  1. 0

    Alchroma

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    My suggestions:

    Check the camera manual and make sure your Panasonic is outputting DV from it's firewire port. Menu settings.

    Most Panas have a reset button to sort out basic troubles. Refer to the manual. It's usually a small recessed, hidden button.

    Double check cables and sockets.

    FYI: Avoid hot swapping with firewire, contrary to much "it's OK" talk, hot swapping can cook firewire boards.

    Al

  2. 0

    ghunter518

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Are you connecting with your camera dial on PC or playback mode? I only have iMovie importing success with the camera on playback mode, which is counter-intuitive, but works. When I'm in PC connection mode, I receive the same communication error message you are describing...

  3. 0

    bigfootedcows

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I've tried resetting the camera and all the other things listed. I've even left the battery out for a while, then reset to see if that would work. Any other suggestions? It may be time to take in to the repair shop.

  4. 0

    Alchroma

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Try these steps in this order.

    Connect the camera to the Mac with the firewire cable.

    Power up the camera and make sure it is in VCR mode.

    Power up the Mac. At this stage when Mac fires up you should be able to see the camera recognized in the System Profiler of Mac as part of the firewire tree. If not then there is a basic connection problem somewhere. If YES:

    Open iMovie and capture.

    If you use Final Cut, the Easy Setup needs to be configured to match your incoming footage from the camera or it probably won't work.

    Al

  5. 0

    billso808

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Your solution works on my Panasonic PV-GS85. Good call!

  6. 0

    Alchroma

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Glad to here you are capturing OK. 🙂

    Just to clarify a few things:

    VCR mode is obviously what Panasonic calls Playback mode. This is the setting for connecting with firewire and capturing video clips to a computer.

    Whereas PC Connection mode is for downloading still images from a memory card via USB to a computer.