Imported from the Apple Support Forums via the Wayback Machine 🔗
I have no idea whats the best way for me to get a bunch of VHS tapes to my mac the easiest way... but I would like to edit them and then burn to iDVD (so I would assume I need them to be quicktime files). I see many services online for VHS to DVD, but I don't want that, since they would burn everything. those cable/convertors seem very pricey, and I really have no idea about them anyway...
Anyone have recommendations for the cheapest and easiest way to do this?
Imported from the Apple Support Forums via the Wayback Machine 🔗
A lot of VHS recorders have composite video output , etc. If you have a digital camcorder you could download the VHS tape to your camcorder and then feed it into iMoive and edit out all the bits (like adverts) that you don't want. This would also be possible with QuickTime. I can't see how you can do it otherwise unless by some miracle your Mac has composite video input.
0
wrsm45·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Hi Owen,
I am using xlr8 to digitize my tapes. It comes with a usb interface and software to import VHS file and export QT files. The URL is http://www.xlr8.com. The whole deal runs about $90.00. I am extremely pleased with my set up. Just click on the xlr8 section on the web site for all the info.
TakeCare
Bill
0
Lennart Thelander·
Imported from the Apple Support Forums via the Wayback Machine 🔗
USB devices usually has much less resolution than a proper DV device and this is no exception:
"Real-time Internet Ready Video Capture to any USB equipped system (500 MHz or faster).
352 x 240, 29.97 fps NTSC
352 x 288, 25 fps PAL/SECAM"
Real DV is 720x480 pixels in NTSC (640x480 square pixels) and PAL is 720x576 (768x576 square pixels).
The key words in xlr8's description is "internet ready video". The video is NOT ready for DVD video discs.
0
wrsm45·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Hi.
Lennart is correct. USB devices do offer less resolution, but I got from your initial post that you wanted something inexpensive. I'm not showing my VHS converts to critics so for me and my family they are OK.
An alternative is firewire devices that are quite expensive.
Good luck in your search.
TakeCare
Bill
0
Owen Starr·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I checked out the Macworld article and they recommend buying the Datavideo DAC-100, so I just ordered it- was under $200. Hope it works! Thank you all for your input, it's greatly appreciated!
0
Joseph Silverman·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I am trying to do the same thing. Would this be possible with a camcorder? On eBay you can get something like a Canon ZR80 for about the price of a new A/D converter (about $200), and that model supposedly has an analog to digital converter built in. But that is a discontinued model. Would it work with iMovie 5.0.2? Would it do the same job as a dedicated converter (the DAC-100 or Canopus)?
0
lotsasons·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I am about to try this too - old family VHS tapes to dvd. I just plunked out $252 at Amazon for the Canopus 110. I am so hopeless with this stuff, I am beaming with gratitude for the link to the macworld article!! Thank you - it is just exactly what I was looking for.
Thanks!
0
kworley·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I don't know about the ZR80, but I just did this with my ZR200, so I'm assuming it would work the same. I connected my camera to the video out ports on the back of my VCR, played the VHS tape while recording with the camera. Once the VHS tape was recorded, I hooked the camera to my computer and used iMovie to import the contents for editing. It worked fine.