Logic Pro Project to Protools
apple Verified ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I have a Logic Pro 8 project that I need to move over to Protools. What is the best way to do this? Is there a way that I can flatten the tracks and simply drag the tracks over to PT as wave files? Is there a special type of software that I will need to purchase?
Thanks,
11 replies
Sign in or join Beachball Help to reply.
- 0
Sampleconstruct ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
In order to include all automation data and Plug Ins of your tracks you'll have to bounce them seperately
or the much faster method:
route each track and it's corresponding Bus/Aux to a recording Bus and select those Recording Busses as Inputs for new Audio tracks. This way you can re-record your entire Project into Logic itself and you'll end up with nicely flattened single tracks which you can export to PT.If you have a multi channel Interface with good AD/DA-converters you could of course also route each track to it's own Output and re-record into Logic through your Interface.
- 0
kernschall ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
What about exporting your Project as OMF-Project?
Just try it...
I've seen it with a Avid-Project opened in ProTools.
Fades, Position, volume maybe even Plugin Settings
where saved and - as far as your destination system
has the same setup in used Plugins - read out correctly.It was a broadcasting company. So they got identically
equippted workplaces. They use ist to transport Projects
between Avid, Premiere and Protools.I didn't try it myself - just got logic π
good luck
- 0
Sampleconstruct ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
In order to include all automation data and Plug Ins of your tracks you'll have to bounce them seperately
or the much faster method:
route each track and it's corresponding Bus/Aux to a recording Bus and select those Recording Busses as Inputs for new Audio tracks. This way you can re-record your entire Project into Logic itself and you'll end up with nicely flattened single tracks which you can export to PT.If you have a multi channel Interface with good AD/DA-converters you could of course also route each track to it's own Output and re-record into Logic through your Interface.
- 0
Jim Frazier ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
If there is automation, but it doesn't necessarily need to be used, like if you're sending tracks to Pro Tools to be mixed...
Logic's "Export ALL tracks as Audio Files" function is perfect for this.
Exporting will include any plug-ins that are used, but because the exporting happens "pre-fader", the audio is exported at unity gain. Which is what you'd want if you were sending off files for someone else to mix on another platform.
And you can also export all tracks in one go. It's very fast.
So if you don't need to include any automation, use the export feature.
- 0
kernschall ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
What about exporting your Project as OMF-Project?
Just try it...
I've seen it with a Avid-Project opened in ProTools.
Fades, Position, volume maybe even Plugin Settings
where saved and - as far as your destination system
has the same setup in used Plugins - read out correctly.It was a broadcasting company. So they got identically
equippted workplaces. They use ist to transport Projects
between Avid, Premiere and Protools.I didn't try it myself - just got logic π
good luck
- 0
Community User ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Try also to use OMF (it is good only if the project has been converted in Audio file
this is the faster way!
but if you have Instruments tracks.... hai hai hai hai!however, there are some info that you must know abaut stereo tracks (instruments are always in stereo)
Pro Tools works only with splitted stereo file...
so 1 Stereo Logic rack = 2 Mono tracks in Pro Tools!PT LE work only up to 32 MONO tracks.
32 Stereo Instruments in Logic = 64 tracks in Pro Tools!
G
PS: (usually My songs comes with 50/60 and more Instruments tracks... : required tracks on Protools : more than 120!!! π )
- 0
Ashermusic ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Jim wrote: "Logic's "Export ALL tracks as Audio Files" function is perfect for this."
Not "perfect" Jim, my friend.
If you are using multi-output software instruments with parts assigned to auxes then you end up with 1 stereo file, which defeats the purpose you set them up for
In this case you have to mute all the auxes but one and choose "Track as Audio" and then repeat the process for each part.
It is a bit of a PITA.
- 0
Marty Frasu ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
If you use BWF (broadcast wave files), they will time-stamp into pro tools.
OMF doesn't really work for me as it is mostly audio instruments going to pro tools.
I do this crazy thing where I hook the lightpipe input to the lightpipe output of a MOTU 2408MK3.
This is Logic 7 mind you...
This gives me the ability to print Audio instrument files to new audio tracks Automation FX and all.
In Logic 8 you can do this with software routing with a bus as a track input. - 0
midnightsun ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Many thanks to all for the helpful suggestions. With Jim's advice I was able to do exactly what I needed to do. I do understand that all is not perfect but it works for me because I essentially wanted to move a bunch of mono tracks over to PT for mixing. I didn't want plugins or any Logic bussing to complicate matters.
- 0
Jim Frazier ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Ashermusic wrote:
Jim wrote: "Logic's "Export ALL tracks as Audio Files" function is perfect for this."Not "perfect" Jim, my friend.
If you are using multi-output software instruments with parts assigned to auxes then you end up with 1 stereo file, which defeats the purpose you set them up for
In this case you have to mute all the auxes but one and choose "Track as Audio" and then repeat the process for each part.
It is a bit of a PITA.
Thanks for mentioning this Jay. yes, if you are using a multi-channel instrument, you would need to solo and bounce each MIDI channel separately. Exporting doesn't work with a multi-channel instrument unfortunately.
But for individual software instruments, and audio tracks, exporting is a great option. I'll forego the use of the word "perfect" here... π
- 0
Community User ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
OMF must be used only for Audio... and works fine! (broadcast-very-old 32bit audio format is not supported in Logic, so, you cannot export from PT to Logic by this way)
If you need to export Midi, you can use export as midi files for Midi parts and OMF for Audio..Hope this should be helpful for the Logic users that want to MIX in ProTools... but I want remaind that there are no reason to export Logic Pro on Pro Tools LE... (Logic Pro is vary advanced software. more than PT LE)
this operation should be not so good also for Mix with Last version of DAE TDM digidesign Hardware!!!Logic works with DAE TDM hardware very fine!!! You just need to talk with the Super-Mega-Digidesign studios and ask for Logic Pro support!
π
G.