Logic Pro midi start/stop remote
apple Verified ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I would like to start and stop (and even record) in logic with MIDI-commands from my keyboard (Roland RD-700GX).
The keyboard has several midi buttons which are progammable but the message which is sent, is not a controler or SysEx but the start/stop status bytes of the MIDI-protocol. Logic cannot recognise these messages. Is there any trick or what can I do to work around this problem.
6 replies
Sign in or join Beachball Help to reply.
- 0
Vacheto ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
voss.audio wrote:
Is there any trick or what can I do to work around this problem.Yes, there is...
Open the Keycommand dialog and select the "Play or Stop" command ( see the pic below ).
Press "Learn new Assignment" button and play the most low note key ( for example C1 ) of your keyboard. Close the dialog and use this note key to play - stop Logic. Note, you need to hold it a bit little to work properly.!http://img6.imageshack.us/img6/1198/startstopkey.gif!
!http://img59.imageshack.us/img59/4967/aglogo45.gif! [www.audiogrocery.com|http://www.audiogrocery.com]
- 0
voss.audio ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Thanks Vacheto, this is a good workaround, but I already use these lower keys for playing the ViennaSoundlibraryInstruments.
- 0
Vacheto ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
voss.audio wrote:
Thanks Vacheto, this is a good workaround, but I already use these lower keys for playing the ViennaSoundlibraryInstruments.I gave an example with "C1", you can use your most high key as well. By the way you mentioned that you have assignable knobs or buttons which do not output standard midi data. What kind of messages do you assign for these knobs/buttons ? Can you try to assign some CC# and toggle - make a snapshot of the "Input Monitor" in Click & Ports Environment layer. I would like to have a look at this snapshot.
!http://img59.imageshack.us/img59/4967/aglogo45.gif! [www.audiogrocery.com|http://www.audiogrocery.com]
- 0
voss.audio ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Hi Vacheto!
It's nice to know You care.
I wrote my problem to ROLAND. They told me that everything is working after MIDI-Protocol: in general a MIDI-Command (CC) is defined in Bnh (n=MIDI-Channel) but MIDI-Start is defined as:
Start > FAh, Stop > FCh
They told me expressly that these are no controlers (Bnh) and no SysEX-data (F0h).
So, it seems to me, that logic don't provide these commands.
What do You think?
Best wishes from Berlin - 0
voss.audio ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Now I've found this:
http://unseretollepage.de/hosted/midiguide/sm.html
(look at FAH and FCH!)
... but how can I tell Logic, to follow these System Messages?
... especially with my Roland Keyboard? - 0
Vacheto ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
voss.audio wrote:
(look at FAH and FCH!)Well I downloaded the Midi Implementation manual and it says that these the S1 and S2 buttons send this messages for start/stop. They are labeled as "Real Time Midi messages" but I could not understand if they are MMC ones for this device. If it is standard MMC it must looks like:
*MMC messages*
An MMC message (that is sent to, or generated by, an MMC device) is:
*F0 7F deviceID 06 command F7*
The third byte is the Device ID.
The fifth byte is the command:
01 Stop
02 Play
03 Deferred Play
04 Fast Forward
05 Rewind
06 Record Strobe (Punch In)
07 Record Exit (Punch out)
08 Record Ready (Record Pause)
09 Pause
0A Eject
0B Chase
0F MMC Reset
40 Write
44 Locate/Go to
47 ShuttleWhere the Roland Device ID is 41 as far as I remember.
You can try the S1 & S2 start/play function but first enable "Listen to MMC Input" logic sync setting ( see the pic below ).I downloaded the User Manual of the RD-700GX as well, so in page 103 I found "Transmitting the Control Change (USER CC)". can you try to assign for S1 & S2 buttons ? If yes then assign CC13 for S1 and CC14 for S2 ( values 0 for example ). After that try to learn the Logic Keycommands dialog for play stop using this buttons - see my first post picture.
!http://img707.imageshack.us/img707/9002/mmc.gif!
!http://img59.imageshack.us/img59/4967/aglogo45.gif! [www.audiogrocery.com|http://www.audiogrocery.com]