Imported from the Apple Support Forums via the Wayback Machine 🔗
Two days ago I took my Apple tv to my girlfriend´s house. When I plugged back in mine, I found that the device does not work any more. The little white little light still shines, but on the tv I see just a black screen, with no logo, nothing. I rebooted it, and via de computer I restored the settings of Apple tv, but this has made no change. I also tried another cable. Nothing. Anybody has any idea how to solve this? Thanks a lot in advance.
Imported from the Apple Support Forums via the Wayback Machine 🔗
Which model Apple TV?
0
AbbeBusoni·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I am not sure. I think I bought it in September 2016, there was already another more expensive version on the market. The software version is 8.4.2 Does this help?
0
vazandrew·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Yes it does help. That would be a 3rd Gen, which was released in 2012 and was disctontinued in 2017.
Some further questions, was the restore completed successfully? Is the white light solid or is it flashing?
0
AbbeBusoni·
Imported from the Apple Support Forums via the Wayback Machine 🔗
The restoration seemed successfu, according to iTunesl. The white light is solid.
0
vazandrew·
Imported from the Apple Support Forums via the Wayback Machine 🔗
If it's been restored and the light is solid then the Apple TV itself seems to be in working order. You mentioned trying another cable, I assume you meant HDMI cable? If possible try another to make sure. Also, try cycling through the inputs on your TV to see if that helps bring up the image. If it persists then I would test on another TV
0
AbbeBusoni·
Imported from the Apple Support Forums via the Wayback Machine 🔗
I tried in other tv and it works, but not on mine. On the other hand my tv seems to work just fine. I tried the other inputs, and none of them work with Apple TV. They do work for my HD Mediabox Receiver. Is there anything else you think I could try? Thanks a lot so far.
0
Rudegar·
Imported from the Apple Support Forums via the Wayback Machine 🔗
maybe using it with her tv changed the resolution to a higher resolution which your tv does not support and lowering it while connected to a tv where it works to a resolution you know your tv can handle and then connecting it back to your tv would help ?
0
AbbeBusoni·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Well, the tv where I had connected Apple TV is smaller and older, but I connected it there anyways. Anyway, I connected it there again. The image resolution is in automatic mode, and in the other tv everything works just fine. But on my tv, I still see nothing. It is like the tv does not recognise de device. I just restarted the rooter, since restarting since to solve lots of stuff. However, I still see nothing.
0
vazandrew·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Leave the Apple TV connected to the TV that isn't working and have it cycle through resolutions via Apple TV using the remote.
On your Apple TV remote hold menu and the up arrow for 5 seconds. It will start the cycle and change resolutions every 20 seconds. If you see an image select OK.
0
AbbeBusoni·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Thanks a lot, but still, I see nothing
0
vazandrew·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Did you connect the Apple TV back to the TV and use the remote to cycle through resolutions? How long did you do it for?
0
AbbeBusoni·
Imported from the Apple Support Forums via the Wayback Machine 🔗
About 5 or 10 min. The light was blinking all this time and now it stopped. I have run it twice, with no luck
0
vazandrew·
Imported from the Apple Support Forums via the Wayback Machine 🔗
Ok. Unfortunately there isn’t really anything else you can do at this point
0
AbbeBusoni·
Imported from the Apple Support Forums via the Wayback Machine 🔗