Benches Apple TV

15

Apple TV 4k turns on by itself

apple Verified

Imported from the Apple Support Forums via the Wayback Machine 🔗

Very frustrating but I've been having issues with my Apple TV 4K turning on by itself. I'm using HDMI-CEC, and therefore it also turns my tv and soundbar on with it. Many times this happens within 30 seconds of putting the ATV to sleep...everything just turns back on with no input from me. I've asked about this on reddit and others are having the same issues, which leads me to believe it is a problem with the ATV and not my TV.

Does anyone else have this problem, or know how to fix it?

15 replies

Sign in or join Beachball Help to reply.

  1. 0

    Dtoledo1956

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Had same problem with an LG TV, LG sound bar and AppleTV 4K. Even replaced AppleTV (under warranty). Still didn’t work. Had repair tech come out for TV. He had to call LG support. Got a knowledgeable tech on the phone. Here’s what solved the problem for us.

    Went into TV settings - general - “Quick Start” and turned it off. Then went into settings-general - “Mobile TV On” and turned off WiFi and Bluetooth. Turns out, our son put an AppleTV Temote app on our iPhones so we could use them as remote controls to the TV. In the process he turned on these settings and caused our TV, sound bar and AppleTV to randomly come back on or not turn off. Turning off these settings on our TV solved our problem. Can’t use the iPhone as a remote, but that’s better than our TV coming back on in the middle of the night.

    Hipe this

  2. 0

    er1c15

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I may have figured it out.

    I have an LG TV like the rest of you. Everything is CEC connected, just like everyone else.

    I turned off Quick Start. Turn-on-via-WiFi was never on.

    My Apple TV is the 4K model.

    After watching TV and going to bed, the TV would randomly turn on... and without getting too much into it, I could tell the Apple TV was triggering it via the CEC configuration. I also noticed that when the Apple TV turned on, the remote had to (re)connect... meaning something else was triggering the Apple TV.

    While mucking about, I used my other IR remote (Apple TV HD) to operate the Apple TV 4K.

    Anyway, I was done watching tv and heading for bed. I turned off the system (hold menu, sleep), and turned off the light.

    As the darkness set in, I heard my (somewhat new) Wyze security cam switch its night vision on... and a few seconds later... voila... system back on!

    Seems to me, the infrared night vision light was bouncing off a wall and triggers the Apple TV to turn on... and since it wasn’t the Apple remote turning it on, that’s why it would need to (re)connect when I would have to turn the system off again.

    Thing is, even after you turn the system back off, it may turn on again, if the infrared light bounces back to the Apple TV... kind of like when you use a mirror to reflect sunlight into someone’s eye.

    Now, I haven’t tried it, but a good way to test it, is to put the Apple TV in a shoebox and see if the random turn-on still occurred. Since the new remote is Bluetooth, everything would still be operable.

    Anyway, everyone probably has some IR device that is causing the Apple TV 4K to turn back on. So a solution would be to put in inside your AV cabinet, or maybe some black tape in front of the IR sensor of the Apple TV.

  3. 0

    Dtoledo1956

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Had the same problem. My son recently added the AppleTV remote control app to our iPhones and enabled the following settings on our TV. Our TV tech said to disable the settings and should solve the problem. It did!

    heres what we did:

    in TV settings under GENERAL, disable QUICK START. Then, also in GENERAL under MOBILE TV ON, disable TURN ON VIA WiFi and TURN ON VIA BLUETOOTH. Can no longer use our iPhone as an AppleTV remote control, but certainly better than TV and connected devices turning back on.

    By disabling these 3 settings on our TV, it worked. Problem started right after he added the app to our phones, so makes sense. Hope this helps.

  4. 0

    Dtoledo1956

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Possible solution for those having trouble with TV and connected devices turning back on.

    Could be be a few incorrect settings on your TV (not AppleTV streaming device).

    These setting changes on our TV solved our problem:

    in TV settings look for something like GENERAL/QUICK START. Turn off. Then look for something like GENERAL/MOBILE TV ON. Turn off sub categories TURN ON VIA BLUETOOTH and TURN ON VIA WiFi.

    disabling these TV settings did the trick.

    Hope this helps some of you with this very frustrating problem. I even exchanged my ApleTV streaming device thinking it was the culprit. Turns out it was our TV settings.

  5. 0

    Dtoledo1956

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    My LG TV tech told me to do these 2 steps to stop my TV and connected devices from restarting:

    in my TV settings in “General”, turn off “Quick Start”. Then also in “General” go to “Mobile TV On” and turn offf “Turn Om Via WiFi” and “Turn On Via Bluetooth”. Solved the problem. My son recently downloaded the AppleTV remote control app for my iPhone and enabled these settings.

    hope this helps.

  6. 0

    Mobius

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Go into settings turn off HDMI-CEC, turn it back on, restart Apple TV, fixed it for me.

  7. 0

    EnspiredTech

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Turn off "Control TVs and Receivers" in Settings: Settings > Remotes and Devices > Control TVs and Receivers > Off

  8. 0

    wasjd

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Well i don’t know if any of you are in the same boat but i try a bunch of these suggestions and they don’t work. But then i always realize i have my appletv remote stored away (I use a harmony remote). So whenever this happens to me, it’s because I recently moved my storage container and the remote is leaning against something.

  9. 0

    vazandrew

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    It is picking up on network activity.

    If on wifi try Ethernet

    To see a current status of the network get a report from istumbler, netstumbler or similar. Look for signal strength, noise, nearby networks

    Test on another network

  10. 0

    vazandrew

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Distance between router and Apple TV will leave room for issues like interference

    You would need to run a diagnostic for the network to actually verify it’s current status.

    You would need to take it to a different location to test on another network

  11. 0

    vazandrew

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Did you try ethernet?

    Did you run a diagnostic report for the network? What were the results?

    Did you test on another network?

  12. 0

    ColinB257

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    EnspiredTech, I don't want to turn off CEC as it's a very useful feature which I use all the time. The problem I want to solve is why the system is getting turned on about 15 seconds after being turned off. For me this started happening about a month ago.

  13. 0

    vazandrew

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    It will either be picking up on network activity or there is an issue with CEC.

    You can troubleshoot the network, as far as CEC you can see if your TV is up to date and contact the manufacturer if necessary

  14. 0

    Vancouver22

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I have that setting set to off in one room or it randomly turns off my tv when I’m watching cable... really annoying,

    In the other room it’s set to on but every time I turn on my tv it turns on Apple TV, but only because I’d not put Apple TV to sleep and switched back over to cable mode after I was done watching. Not really the same issues with the OP though.

  15. 0

    vazandrew

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    If there were any issues with the network, including interference, it can wake the Apple TV. You would be troubleshooting your own network as above