5 replies
Sign in or join Beachball Help to reply.
- 0
Winston Churchill ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
The output resolution from the tv is 1080, it is interlaced and the picture is refreshed 50 times every second.
I'm not sure that will mean an awful lot more to you, perhaps if you could tell us why you are asking we could explain in the context of your query.
- 0
Neil Cudmore ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
1080i hd 50hz is the standard currently agreed on in the UK for HD broadcast (PAL). Other 'HD standards' such as 720p or 1080p etc have a look at
http://www.ebu.ch/CMSimages/en/tecdoc_t3299tcm6-23327.pdf can be used by other equipment.Sky HD is max of 1080i in transmission (
http://www.sky.com/portal/site/skycom/skyproducts/skytv/skyhd/faqs). Looking at the math of getting a full 1080p broadcast, it's a huge additional amount of bandwidth required hence Blu-Ray players and the now defunct HD-DVD formats.If buying a new TV in the UK, you'll get the blurb from the sale folks on HD Ready, but the HD Ready logo only guarantees a minimum standard. For example,
- It only requires a 720 line native screen resolution, not the higher 1080 resolution.
- It does not even require 1280x720 native screen resolution, stretched 1024x720 will pass.
- It does not require that the display can render the full 50 or 60 frames per second of the 720p standards.
- It only requires DVI or HDMI, not both.
- It does not specify how well the 720p and 1080i inputs have to map to the screens native display format
- It says nothing about other picture quality elements such as physical size and contrast ratio.
- It says nothing about the audio standards supported, or background noise levels.I have an old Philips plasma TV which accepts the 1080i picture or 526p (HDMI connection) and not the 1080p or 720p. Some displays (note I said displays) with show 1080i at 100mhz, some at 1080i @ 60hz (NTSC standard) and 1080i @ 50hz. The one I have will not do 100mhz - and is very err 'temperamental' on switching from 60hz to 50hz as will as between 1080i and 526p. As a result of this, setting the ATV to 1080i @ 50hz and the Sky HD to the same causes less problems when changing back and forth. A newer set should accept a HD signal, and not have problems switching - remember Sky also now support 720p, and non-hd channels get 526p by default.
Hope this helped....
- 0
Winston Churchill ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
The output resolution from the tv is 1080, it is interlaced and the picture is refreshed 50 times every second.
I'm not sure that will mean an awful lot more to you, perhaps if you could tell us why you are asking we could explain in the context of your query.
- 0
Alley_Cat ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
PAL video is 25fps progressive or 50fps interlaces as opposed to roughly 30 and 60 for NTSC.
So in theory the 50Hz settings are for PAL TV sets or media running at PAL not NTSC rates.
In practice most modern TVs can handle PAL or NTSC signals so it may not matter.
However it is not quite clear what AppleTV does if playing a 25 fps video to an NTSC TV (default non 50Hz modes) - does it just duplicate every 5th frame and adjust audio (slower) or do nothing and let the Tv worry about it!
AC
- 0
Neil Cudmore ·
Imported from the Apple Support Forums via the Wayback Machine 🔗
1080i hd 50hz is the standard currently agreed on in the UK for HD broadcast (PAL). Other 'HD standards' such as 720p or 1080p etc have a look at
http://www.ebu.ch/CMSimages/en/tecdoc_t3299tcm6-23327.pdf can be used by other equipment.Sky HD is max of 1080i in transmission (
http://www.sky.com/portal/site/skycom/skyproducts/skytv/skyhd/faqs). Looking at the math of getting a full 1080p broadcast, it's a huge additional amount of bandwidth required hence Blu-Ray players and the now defunct HD-DVD formats.If buying a new TV in the UK, you'll get the blurb from the sale folks on HD Ready, but the HD Ready logo only guarantees a minimum standard. For example,
- It only requires a 720 line native screen resolution, not the higher 1080 resolution.
- It does not even require 1280x720 native screen resolution, stretched 1024x720 will pass.
- It does not require that the display can render the full 50 or 60 frames per second of the 720p standards.
- It only requires DVI or HDMI, not both.
- It does not specify how well the 720p and 1080i inputs have to map to the screens native display format
- It says nothing about other picture quality elements such as physical size and contrast ratio.
- It says nothing about the audio standards supported, or background noise levels.I have an old Philips plasma TV which accepts the 1080i picture or 526p (HDMI connection) and not the 1080p or 720p. Some displays (note I said displays) with show 1080i at 100mhz, some at 1080i @ 60hz (NTSC standard) and 1080i @ 50hz. The one I have will not do 100mhz - and is very err 'temperamental' on switching from 60hz to 50hz as will as between 1080i and 526p. As a result of this, setting the ATV to 1080i @ 50hz and the Sky HD to the same causes less problems when changing back and forth. A newer set should accept a HD signal, and not have problems switching - remember Sky also now support 720p, and non-hd channels get 526p by default.
Hope this helped....